Grinders

GG 25P474

GRINDLAZER SYSTEM, HP DC1538 G DCS

GrindLazer HP DC1538 G DCS Self-Propelled Gas-Powered Scarifier, High-Speed Pulley Kit The DC1538 G DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

• Adaptable for leveling, grooving, scarifying, and stripping coatings
• Up to 16 inch removal path
• Wide variety of cutters available
• High-speed pulley kit for diamond and PCD cutters
• Quick-change side plate for easier drum removal

Depth Control System

• Eliminate Measuring & Guesswork
• Quickly and precisely adjust the cutter depth with the push of a button
• Achieve accurate cut depth for leveling, grooving, and inlay
• Eliminate damage due to “dropped drums”

DCS Controller

• Total Operator Control
• Easy adjustment via control panel buttons
• Set “zero point” where the cutter meets the surface
• Adjust cut depth in 0.01 inch increments
• Displays “active depth” from zero point
• English and metric units
• Robust design stands up to harsh job site environments
• Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

• Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

• All-steel chassis
• Low-vibration design
• Long-life bearings

Powered by a 38 HP Kohler® EFI Gasoline Engine Dust Removal

• Dust port for connecting to LazerVac vacuum systems

GG 25P475

GRINDLAZER SYSTEM, HP DC1525 P DCS

GrindLazer HP DC1525 P DCS Self-Propelled Propane-Powered Scarifier, High-Speed Pulley Kit The DC1525 P DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

• Adaptable for leveling, grooving, scarifying, and stripping coatings
• Up to 16 inch removal path
• Wide variety of cutters available
• High-speed pulley kit for diamond and PCD cutters
• Quick-change side plate for easier drum removal

Depth Control System

• Eliminate Measuring & Guesswork
• Quickly and precisely adjust the cutter depth with the push of a button
• Achieve accurate cut depth for leveling, grooving, and inlay
• Eliminate damage due to “dropped drums”

DCS Controller

• Total Operator Control
• Easy adjustment via control panel buttons
• Set “zero point” where the cutter meets the surface
• Adjust cut depth in 0.01 inch increments
• Displays “active depth” from zero point
• English and metric units
• Robust design stands up to harsh job site environments
• Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

• Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

• All-steel chassis
• Low-vibration design
• Long-life bearings

Powered by 25 HP Kohler® EFI Propane Engine Dust Removal

• Dust port for connecting to LazerVac vacuum systems

GG 25P476

GRINDLAZER SYSTEM, HP DC1520 E DCS

GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

• Adaptable for leveling, grooving, scarifying, and stripping coatings
• Up to 16 inch removal path
• Wide variety of cutters available
• High-speed pulley kit for diamond and PCD cutters
• Quick-change side plate for easier drum removal

Depth Control System

• Eliminate Measuring & Guesswork
• Quickly and precisely adjust the cutter depth with the push of a button
• Achieve accurate cut depth for leveling, grooving, and inlay
• Eliminate damage due to “dropped drums”

DCS Controller

• Total Operator Control
• Easy adjustment via control panel buttons
• Set “zero point” where the cutter meets the surface
• Adjust cut depth in 0.01 inch increments
• Displays “active depth” from zero point
• English and metric units
• Robust design stands up to harsh job site environments
• Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

• Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

• All-steel chassis
• Low-vibration design
• Long-life bearings

Powered by 20 HP Motor, 480V, 60Hz, 3ph Dust Removal

• Dust port for connecting to LazerVac vacuum systems

GG 25P783

GRINDLAZER SYSTEM, GRACO FS351 E DCS 380V/50

Graco 25P783 GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit

The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.

Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.

• Do-It-All Solution
  
  • Adaptable for leveling, grooving, scarifying, and stripping coatings
  • Up to 16 inch removal path
  • Wide variety of cutters available
  • High-speed pulley kit for diamond and PCD cutters
  • Quick-change side plate for easier drum removal
• Depth Control System
  
  • Eliminate Measuring & Guesswork
  • Quickly and precisely adjust the cutter depth with the push of a button
  • Achieve accurate cut depth for leveling, grooving, and inlay
  • Eliminate damage due to “dropped drums”
• DCS Controller
  
  • Total Operator Control
  • Easy adjustment via control panel buttons
  • Set “zero point” where the cutter meets the surface
  • Adjust cut depth in 0.01 inch increments
  • Displays “active depth” from zero point
  • English and metric units
  • Robust design stands up to harsh job site environments
  • Electronic components are protected against dust, debris, water, and vibration
• Designed for the Toughest Jobs
  
  • All-steel chassis
  • Low-vibration design
  • Long-life bearings
• Powered by 20 HP Motor, 380V, 50Hz, 3ph
• Dust Removal
  
  • Dust port for connecting to LazerVac vacuum systems

• Model: GrindLazer
• Series: High Production Series
• Product Series: High Production

• Cutter Drum Diameter (in): 10
• Cutter Type: Drum

• Maximum Cut Rate (ft2/hr): 3500
• Maximum Cut Width (cm): 41
• Maximum Cut Width (in): 16
• Maximum Cut Width (mm): 406

GG 25R100

GRINDLAZER SYSTEM, DC1538 G DCS STD-SPEED

Graco 25R100 GrindLazer HP DC1538 G DCS Self-Propelled Gas-Powered Scarifier, Low-Speed Pulley Kit

The DC1538 G DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.

Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.

• Do-It-All Solution
  
  • Adaptable for leveling, grooving, scarifying, and stripping coatings
  • Up to 16 inch removal path
  • Wide variety of cutters available
  • Low-speed pulley kit for carbide flail cutters
  • Quick-change side plate for easier drum removal
• Depth Control System
  
  • Eliminate Measuring & Guesswork
  • Quickly and precisely adjust the cutter depth with the push of a button
  • Achieve accurate cut depth for leveling, grooving, and inlay
  • Eliminate damage due to “dropped drums”
• DCS Controller
  
  • Total Operator Control
  • Easy adjustment via control panel buttons
  • Set “zero point” where the cutter meets the surface
  • Adjust cut depth in 0.01 inch increments Displays “active depth” from zero point
  • English and metric units
  • Robust design stands up to harsh job site environments
  • Electronic components are protected against dust, debris, water, and vibration
• Designed for the Toughest Jobs
  
  • All-steel chassis
  • Low-vibration design
  • Long-life bearings
• Powered by a 38 HP Kohler® EFI Gasoline Engine
• Dust Removal
  
  • Dust port for connecting to LazerVac vacuum systems

• Product Series: High Production

• Air Filter Type: Heavy-Duty

• Cutter Drum Diameter (in): 10
• Cutter Type: Drum

• Depth Adjustment: Depth Control System (DCS)

• Engine Brand: Kohler
• Engine Size (HP): 38
• Engine Start Type: Electric Start

• Maximum Cut Rate (ft2/hr): 3500
• Maximum Cut Width (cm): 41
• Maximum Cut Width (in): 16
• Maximum Cut Width (mm): 406

GG 25R101

GRINDLAZER SYSTEM, DC1525 P DCS STD-SPEED

Graco 25R101 GrindLazer HP DC1525 P DCS Self-Propelled Propane-Powered Scarifier, Low-Speed Pulley Kit

The DC1525 P DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.

Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.

• Do-It-All Solution
  
  • Adaptable for leveling, grooving, scarifying, and stripping coatings
  • Up to 16 inch removal path
  • Wide variety of cutters available
  • Low-speed pulley kit for carbide flail cutters
  • Quick-change side plate for easier drum removal
• Depth Control System
  
  • Eliminate Measuring & Guesswork
  • Quickly and precisely adjust the cutter depth with the push of a button
  • Achieve accurate cut depth for leveling, grooving, and inlay
  • Eliminate damage due to “dropped drums”
• DCS Controller
  
  • Total Operator Control
  • Easy adjustment via control panel buttons
  • Set “zero point” where the cutter meets the surface
  • Adjust cut depth in 0.01 inch increments
  • Displays “active depth” from zero point
  • English and metric units
  • Robust design stands up to harsh job site environments
  • Electronic components are protected against dust, debris, water, and vibration
• Designed for the Toughest Jobs
  
  • All-steel chassis
  • Low-vibration design
  • Long-life bearings
• Powered by 25 HP Kohler® EFI Propane Engine
• Dust Removal
  
  • Dust port for connecting to LazerVac vacuum systems

• Product Series: High Production

• Air Filter Type: Heavy-Duty

• Cutter Drum Diameter (in): 10
• Cutter Type: Drum

• Depth Adjustment: Depth Control System (DCS)

• Engine Brand: Kohler
• Engine Size (HP): 25
• Engine Start Type: Electric Start

• Maximum Cut Rate (ft2/hr): 3500
• Maximum Cut Width (cm): 41
• Maximum Cut Width (in): 16
• Maximum Cut Width (mm): 406

GG 26A757

Grindlazer System, Hpdc1021Dcs, 10In Dmnddrum

GG 25N360

Grindlazer System, Dc1021, 10In, 5 Pt Diamond

GG 26A758

Grindlazer System, Hpdc1021Dcs, 5In Dmnd Drum

GG 25N361

Grindlazer System, Dc1021, 5In, 5 Pt Diamond

GG 26A755

Grindlazer System, Hpdc1021Dcs, 10Crbdfullf

GG 26A754

Grindlazer System, Hpdc1021Dcs, 10Crbdfullm

GG 26A756

Grindlazer System, Hpdc1021Dcs, 10Crbdpickf

GG 26A750

Grindlazer System, Hpdc1021Dcs, 10Crbdflt M

GG 26A693

Grindlazer System, Dc1021G, 10InFulcrbdmil F

GG 26A751

Grindlazer System, Hpdc1021Dcs, 10Crbdflt C

GG 26A753

Grindlazer System, Hpdc1021Dcs, 10Crbdtip F

GG 26A752

Grindlazer System, Hpdc1021Dcs, 10Crbdtip M

GG 26A748

Grindlazer System, Hpdc1021Dcs, 10In Crbdfl M

GG 26A692

Grindlazer System, Dc1021G, 10InFulcrbdmil M

GG 26A749

Grindlazer System, Hpdc1021Dcs, 10In Crbdfl C

GG 26A743

Grindlazer System, Hpdc1013Dcs, 10Crbdfullf

GG 26A746

Grindlazer System, Hpdc1021Dcs, 10Stl Str F

GG 26A747

Grindlazer System, Hpdc1021Dcs, 10In, Beam F

GG 26A745

Grindlazer System, Hpdc1021Dcs, Wire Brush