Grinders
Turbine Grinder, FE, 100K, 3mm Collet
DC 10R9000-03
TURBINE GRD,FE,100K,3MM COLLET- Requires no air line lubrication - High precision ball bearings for long life expectancy
- Two-stage turbine motor with roll throttle
- Achieves a superb finish with its high speed and precision spindle
- Light weight and durable steel housing
- Low vibration and quiet operation minimizes operator fatigue
Exhaust: Front
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 0.441 lb
CAUTION: Use dry air at 90 psi maximum: Do not lubricate turbine grinders. Lubrication will be detrimental to the operation and life of turbine tools. Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, 7 ft./2.1 m air supply hose, replaceable cartridge hose filter.
.4 hp Straight-Line Die Grinder
DY 48360
.4 hp Straight-Line Die Grinder20,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Standard Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 20000.0
- Motor RPM: 20,000
Die Grinder, Straight, 1/4in. Collet, .5 HP, 24000 rpm, Front Exhaust
DY 51303
.5 hp Straight-Line Die Grinder24,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets
Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)
Gearless for reduced maintenance and downtime.
- HP: 0.5
- Max. RPM: 24000.0
- Motor RPM: 24000
.5hp Straight-Line Die Grinder, 24, 000 RPM, Gearless, Extended Rear Exhaust, 1/4 and 6mm Collets
DY 51307
.5 hp Straight-Line Die Grinder24,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets
Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)
Gearless for reduced maintenance and downtime.
- HP: 0.5
- Max. RPM: 24000.0
- Motor RPM: 24000
Die Grinder, 1/4 Collet, 18000 Rpm
DY 52668
1 hp Straight-Line Die Grinder18,000 RPM, Gearless, Rear Exhaust, 1/4in and 6mm Collets
Includes 1/4in Collet Insert (50013), fits optional 1/8in (50065), 3/8in (50014), 6 mm (50016), 8 mm (50039)
Gearless for reduced maintenance and downtime.
- HP: 1.0
- Max. RPM: 18000.0
- Motor RPM: 18000
.4 Hp Straight-Line Pencil Grinder 25, 000 Rpm
DY 52861
.4 hp Straight-Line Pencil Grinder25,000 RPM, Rotary Vane Air Motor, Rear Exhaust, 1/8in Collet
Tool has integrated collet with 1/8in Collet Insert (01495). Optional 52898 Thread Guard allows easy access to collet cap. With Thread Guard in place, larger diameter accessories may be run by tool. (All accessories must have maximum operating speed of 25,000 RPM).
High-efficiency rotary vane air motor models are ideal for precision deburring and finishing on a variety of surfaces.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
Extension Grinder
DY 53523
Polisher (Triple Extension)1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 1/2in -20 Spindle Thread
Includes 1/2in -20 Male Threaded Adapter (53549)
Extension Grinders allow operator to extend into work pieces and reach lengthy distances.
- HP: 1.0
- Max. RPM: 3400.0
- Motor RPM: 3,400
Right Angle Cutoff Tool
DY 54746
4in (102 mm) Diameter Extended Right Angle Type 41 Cut-Off Tool.7 hp, 13,500 RPM, Steel
Model accepts 4in (102 mm) diameter Type 41 reinforced Cut-Off Wheels, with 3/8in (9.5 mm) center hole
Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
- HP: 0.7
- Max. RPM: 13500.0
- Motor RPM: 13,500
4in Ext RA Grinder, Steel, Type 27, 12000, .7HP
DY 54789
4in (102 mm) Diameter Extended Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 12,000 RPM, Steel
Model accepts optional 4in (102 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8in (10 mm) center hole. wheel width of 1/8in to 1/4in (3 mm to 6 mm).
Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
- HP: 0.7
- Max. RPM: 12000.0
- Motor RPM: 12,000
4in, Extended Rt. Angle. Grinder, .7hp
DY 54793
4in (102 mm) Diameter Extended Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 13,500 RPM, Steel
Model accepts optional 4in (102 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8in (10 mm) center hole. wheel width of 1/8in to 1/4in (3 mm to 6 mm).
Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
- HP: 0.7
- Max. RPM: 13500.0
- Motor RPM: 13,500
Cut Off Tool
DY ECU4
4in Diameter Extension Cut-Off Tool, Right Angle, 14,000 RPM3/8in -24 Spindle, Rear Exhaust
Model accepts 4in (76 mm) diameter Type 41 reinforced Cut-Off Wheels, with 3/8in (9.5 mm) center hole
Composite grip absorbs vibration and reduces cold air transmission to operator
- HP: 1.0
- Max. RPM: 14000.0
Payment options
