GRACO INC. S10595

GG 25M457

GG 25M459

GG 25M460

GG 25M461

GG 25M481

AGITATOR, DIRECT, DRIVE

Graco 25M481 Stainless Steel Direct Drive, 30/55 gallon, 1 stainless steel 8-inch (20 cm) impeller

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
• Maximum allowable process fluid temperature: 194 degree F (90 degree C)

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 500

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25M494

GG 25M493

GG 25M496

KIT, UNION, FITTING

Graco 25M496 G-Lock Push-To-Connect Stud Fitting - 90 degree, 1/4 in, Field-Installable

• G-Lock Push-To-Connect (PTC) Fitting
• 1/4 in field-installable stud
• 90 degree

• Connection Type: Push-to-Connect

• Hose Inside Diameter (in): 0.125
• Hose Inside Diameter (mm): 3

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20670
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

GG 25M497

KIT, UNION, FITTING

Graco 25M497 G-Lock Push-To-Connect Stud Fitting - Straight, 1/4 in, Field-Installable

• G-Lock Push-To-Connect (PTC) Fitting
• Straight 1/4 in field-installable stud

• Connection Type: Push-to-Connect

• Hose Inside Diameter (in): 0.125
• Hose Inside Diameter (mm): 3

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20670
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

GG 25M525

KIT,REPAIR,AMZ

Graco 25M525 AMZ Repair Kit

KIT INCLUDES: MODULE, GCA, MZLP4 W DB [QTY. 1], LABEL, IDENTIFICATION [QTY. 1], SOFTWARE, GCA, MZLP4, APP [QTY. 1], SOFTWARE, GCA, MZLP4 DB, APP [QTY. 1]

GG 25M535

KIT, AIR MOTOR, PISTON, REBUILD

Graco 25M535 Radial Piston Air Motor Rebuild Kit

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Maintain easily - air line lubrication not required.
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Motor Type: Pneumatic - Radial Piston

GG 25M553

GG 25M593

GG 25N690

GG 25N519

KIT,DRIVER,APD20,VERTICAL

KIT INCLUDES: DRIVER, NON-HAZ, APD20, VERTICAL [QTY. 1], LABEL, WARNING [QTY. 1], BOX, JUNCTION, POWER, MOTOR, APD [QTY. 1], SCREW, SHCS M8X60 [QTY. 4 ], PLUG, PIPE HEADLES [QTY. 1], GRIP, CORD, .35-.63, 3/4 [QTY. 1], SWITCH, DISCONNECT, 40A [QTY. 1], COVER, JUCTION BOX, APD MOTOR [QTY. 1], SCREW, SOCKET, FL HD [QTY. 4 ], KNOB, DISCONNECT, PANEL, BLACK [QTY. 1], FERRULE, 16 GA TWIN WIRE [QTY. 2], LABEL, CAUTION [QTY. 1], DOCUMENT, DECLARATION [QTY. 1], LABEL, E-FLO SP [QTY. 1]

GG 25M603

GG 25N693

GG 25M761

ENDURA-FLO PUMP, 3:1 AODD, 350, NPT, ADV

Graco 25M761 Endura-Flo 3D350, 3:1 Air Operated Diaphragm Pump, 350cc, NPT, DataTrak

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
• DataTrek option prevents runaway and tracks material usage

• Model: Endura-Flo
• Series: 3D350

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Type: NPT

• Includes: NPT Fittings, DataTrak

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 5.5
• Maximum Flow Rate (L/min): 20.8

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Power Source: Air

• Pump Ratio: 3:1

GG 25M830

GG 25N109

GL-1 SST INJECTOR, REPLACEMENT

Graco 25N109 GL-1 316 SST Grease Injector - Replacement Injector

Custom fit your system with Gracos adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.

• The GL-1 SST injectors are offered as a a replacement injector for manifold systems for easy customization to a variety of applications
• Includes an adjustable hex head nut to make adjusting the output simple
• No vent holes and fully enclosed press fittings to prevent leaking lubricant
• Rugged, single piece uni-body design built for the harshest environments

• Model: GL-1
• Adjustable: Adjustable

• Application: In-Plant Machinery, Off-Road Equipment, In-Plant Equipment and Machinery, Mining, Wind Energy

• Compatible Material: Grease
• Compatible Metering Device: Single Line Parallel, Single Line

• Cycle Indicator: Visual Pin

• Feedback Options: Visual Pin Indication

• For Use With: Grease dispense in highly corrosive environments

• Material: Stainless Steel

• Maximum NLGI Grade: #2

• Maximum Operating Pressure (psi): 3500
• Maximum Operating Temperature ( degree C): 190
• Maximum Operating Temperature ( degree F): 374

• Maximum Output Volume (in cu ): 0.08

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kg/cm 2): 246
• Maximum Working Pressure (kPa): 24132
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500
• Meter Type: Positive Displacement

• Minimum Operating Pressure (psi): 1850
• Minimum Output Volume (in cu ): 0.008

• Minimum Working Pressure (bar): 128
• Minimum Working Pressure (kg/cm 2): 130
• Minimum Working Pressure (kPa): 12755
• Minimum Working Pressure (MPa): 12.8

• Minimum Working Pressure (psi): 1850

• Number of Adjustment Turns: 10

• Outlet Size (in): 1/8 NPT
• Outlet Thread Gender: Female
• Outlet Thread Type: NPT

GG 25N408

KIT, PUMP, 4B, BELLOWS, 1500 CC

Graco 25N408 Sealed 4-Ball Lower, 1500cc, Chrome Cylinders, Standard Top Plate Rotation

Graco's Sealed 4-Ball Lower needs no routine maintenance and prevents unexpected downtime. The sealed fluid section eliminates the need for TSL (throat seal liquid). Designed to keep pumping in the event of a bellows failure, the lower allows you to schedule maintenance.

• Chrome coating on lower rods and cylinders works well for fine pigment paint and fluids with low lubrication, such as solvents and water.
• Connection kits contain tie rods and adapters - everything required to upgrade most legacy Graco circulation pumps to the latest technology. Refer to manual 311876 for complete information.

• Fluid Inlet Size (cm): 3.81
• Fluid Inlet Size (in): 1.5
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: Tri-Clamp

• Maximum Flow Rate (GPM): 7.9

• Maximum Operating Temperature ( degree F): 150
• Maximum Output (cm cu ): 30000

• Maximum Pump Speed (CPM): 20

• Maximum Working Pressure (psi): 460

GG 25M758

ENDURA-FLO PUMP, 3:1 AODD, 350, NPT, STD

Graco 25M758 Endura-Flo 3D350, 3:1 Air Operated Diaphragm Pump, 350cc, NPT

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 3D350

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Type: NPT

• Includes: NPT Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 5.5
• Maximum Flow Rate (L/min): 20.8

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Power Source: Air

• Pump Ratio: 3:1

GG 25M759

ENDURA-FLO PUMP, 3:1 AODD, 350, BSP, STD

Graco 25M759 Endura-Flo 3D350, 3:1 Air Operated Diaphragm Pump, 350cc, BSPP

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 3D350

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: BSPP

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Type: BSPP

• Includes: BSPP Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 5.5
• Maximum Flow Rate (L/min): 20.8

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 14.39

• Power Source: Air

• Pump Ratio: 3:1

GG 25N780

GG 25N520

GG 25M829

GG 25N832

GG 25M828

GG 25N738

GG 25M760

ENDURA-FLO PUMP, 3:1 AODD, 350, TRI, ADV

Graco 25M760 Endura-Flo 3D350, 3:1 Air Operated Diaphragm Pump, 350cc, Tri-Clamp, DataTrak

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
• DataTrek option prevents runaway and tracks material usage

• Model: Endura-Flo
• Series: 3D350

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Tri-Clamp

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4

• Includes: Tri-Clamp Fittings, DataTrak

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 5.5
• Maximum Flow Rate (L/min): 20.8

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Power Source: Air

• Pump Ratio: 3:1

GG 25M739

ENDURA-FLO PUMP, 3:1 AODD, 150, TRI, STD

Graco 25M739 Endura-Flo 3D150, 3:1 Air Operated Diaphragm Pump, 150cc, Tri-Clamp

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 3D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Tri-Clamp

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4

• Includes: Tri-Clamp Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Power Source: Air

• Pump Ratio: 3:1

GG 25M743

ENDURA-FLO PUMP, 3:1 AODD, 150, NPT, ADV

Graco 25M743 Endura-Flo 3D150, 3:1 Air Operated Diaphragm Pump, 150cc, NPT, DataTrak

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
• DataTrek option prevents runaway and tracks material usage

• Model: Endura-Flo
• Series: 3D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: NPT

• Includes: NPT Fittings, DataTrak

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Power Source: Air

• Pump Ratio: 3:1

GG 25N833

KIT,NOZZLE,PRECISION HW 1.5MM

GG 25M604

GG 25N831

GG 25N677

CLEANER, HIGH PRESSURE, 4040 HG-DD

Graco 25N677 G-Force II 4040 HG-DD Pressure Washer

Ideal for large residential or commercial contractors, the G-Force II 4040 HG-DD pressure washer delivers higher power and flow and is built tough to handle weekly use and deliver high flow and pressure in a compact, durable package.

• Honda Engines
  

  Reliable, powerful & easy-to-start

  Oil Alert shuts down engine to prevent damage if oil level drops too low

  Thermal sensor prevents pump from overheating in bypass mode

• Reliable, GP Triplex Plunger Water Pump
• 100% Heavy-Gauge Aluminum Frames
  

  Up to 40% lighter than steel frames

  Corrosion resistant to water and chemicals

  Standard on all Graco models

  Lifetime Warranty

• Direct Drive
  

  Compact design with fewer components and lighter weight

  Pump is connected directly to the drive shaft of the engine

  Pump rpm matches that of the engine (usually around 3500 rpm)

• Model: G-Force II
• Series: 4040

• Engine Brand: Honda
• Engine Model: GX390

• Fuel Tank Capacity (L): 6.5
• Fuel Tank Capacity (qt): 6.9

• Hose Inlet Diameter (cm): 0.9525
• Hose Inlet Diameter (in): 3/8
• Hose Inlet Diameter (mm): 9.525
• Hose Length (cm): 1524
• Hose Length (ft): 50
• Hose Length (m): 15.2
• Hose Length (mm): 15240

• Includes: Professional-Grade Pressure Washer Spray Gun with Quick Connects, 36 in Pressure Washer Wand with Quick Connect, 3/8 in x 50 ft Non-Marking Pressure Washer Hose, 4 ft Chemical Injector Hose with Strainer, 0 degree Red Pressure Washer Tip, 15 degree Yellow Pressure Washer Tip, 25 degree Green Pressure Washer Tip, 40 degree White Pressure Washer Tip, Black Chemical Pressure Washer Tip

• Maximum Flow Rate (GPM): 4
• Maximum Flow Rate (L/min): 15.14

• Maximum Fluid Pressure (bar): 275.8
• Maximum Fluid Pressure (kPa): 27580
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 275.8
• Maximum Fluid Pressure (kPa): 27580
• Maximum Fluid Pressure (psi): 4000

• Maximum Operating Temperature ( degree C): 63
• Maximum Operating Temperature ( degree F): 145

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (kPa): 27600
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Motor Drive Type: Direct Drive

• Pump Brand: GP

• Pump Type: Triplex Plunger

• Recommended Weekly Usage (Hours): 20-30

GG 25N842

KIT,HC TUBE,85KV,XP W/COVER

GG 25M741

ENDURA-FLO PUMP, 3:1 AODD, 150, BSP, STD

Graco 25M741 Endura-Flo 3D150, 3:1 Air Operated Diaphragm Pump, 150cc, BSPP

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 3D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: BSPP

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: BSPP

• Includes: BSPP Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 12.23

• Power Source: Air

• Pump Ratio: 3:1

GG 25N843

KIT,HC TUBE,60KV,XP W/COVER

GG 25M740

ENDURA-FLO PUMP, 3:1 AODD, 150, NPT, STD

Graco 25M740 Endura-Flo 3D150, 3:1 Air Operated Diaphragm Pump, 150cc, NPT

The Endura-Flo 3D offers extended durability. The isolated air section of the 3:1 Endura-Flo pump prevents fluids from entering the air section and muffler. Ideal for fluid transfer and supply, small paint circulation and piggable paint systems requiring a lower pressure range and seeking extended diaphragm life.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 3D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: NPT

• Includes: NPT Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 12.23

• Power Source: Air

• Pump Ratio: 3:1

GG 25N881

AGITATOR, IN-DRUM, 1.5 BUNG,

Graco 25N881 In-Drum, 1.5-inch (3.8 cm) Bung Mount

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
• Maximum allowable process fluid temperature: 194 degree F (90 degree C)

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Speed (RPM): 100

• Maximum Viscosity (cP): 500

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25N882

AGITATOR, IN-DRUM, 2.0 BUNG,

Graco 25N882 In-Drum, 2-inch (5 cm) Bung Mount

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
• Maximum allowable process fluid temperature: 194 degree F (90 degree C)

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Speed (RPM): 100

• Maximum Viscosity (cP): 500

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25N856

GG 25N892

GG 25N894

GG 25N895

KIT,NOZZLE,1.00MM,XP,GREEN

GG 25N896

KIT,NOZZLE,1.20MM,XP,GRAY

GG 25N897

KIT,NOZZLE,1.80MM,XP,BROWN

GG 25N919

GG 25P064

KIT, SANITARY GASKET-K1 EP-4

Graco 25P064 EPDM Seal Kit for 3-inch Flapper Pump

GG 25P114

GG 25P280

GG 25P544

GT 750 PUMP, TOPPER

Graco 25P544 GT 750 36:1 Grease Transfer Topper-Inductor Package for 400 lb (180 kg) drums

The GT 750 36:1 pump was engineered for efficient grease transfer in demanding applications. The Topper-Inductor package allows for quick drum changes and reduces strain on operators.

GG 25P270

KIT, DIAPHRAGM-H1 EO

Graco 25P270 EPDM Overmold Diaphragm Kit for 2- to 4-inch Pump

GG 25P588

FUSION PC GUN, RND, 01

Graco 25P588 Fusion ProConnect Gun with Round 01 Mix Chamber and 0.042 in (1.06 mm) Orifice Size

A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.

• A single cartridge replaces the entire fluid section in seconds
• Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns
• Retrofit Kit available to convert existing Fusion AP guns

• Model: Fusion PC
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Applicator Type: Manual

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 1.07

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air Purge Gun
• Gun Weight (g): 1338
• Gun Weight (kg): 1.3
• Gun Weight (lb): 2.95
• Gun Weight (oz): 47

• Impingement Port Size (in): 0.042
• Impingement Port Size (mm): 1.07
• Includes: PC42RD Mix Chamber Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Working Pressure (bar): 245
• Maximum Fluid Working Pressure (MPa): 24.5
• Maximum Fluid Working Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air

GG 25P208

KIT, DIAPHRAGM-F1 PO

Graco 25P208 PTFE/EPDM Overmold Diaphragm Kit for 1.5-inch Pump

GG 25P589

FUSION PC GUN, RND, 02

Graco 25P589 Fusion ProConnect Gun with Round 02 Mix Chamber and 0.052 in (1.3 mm) Orifice Size

A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.

• A single cartridge replaces the entire fluid section in seconds
• Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns
• Retrofit Kit available to convert existing Fusion AP guns

• Model: Fusion PC
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Applicator Type: Manual

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): .052
• Fluid Orifice Size (mm): 1.07

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air Purge Gun
• Gun Weight (g): 1338
• Gun Weight (kg): 1.3
• Gun Weight (lb): 2.95
• Gun Weight (oz): 47

• Impingement Port Size (in): 0.052
• Impingement Port Size (mm): 1.32
• Includes: PC52RD Mix Chamber Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Working Pressure (bar): 245
• Maximum Fluid Working Pressure (MPa): 24.5
• Maximum Fluid Working Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air I

GG 25P660

GG 25P704

KIT, FUSION PC, RETRO, BARE

Graco 25P704 Fusion ProConnect Retrofit Kit without Mix Chamber

Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and can be combined with any Fusion PC mix chamber (sold separately). Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold.

• A single cartridge replaces the entire fluid section in seconds
• Sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns

• Model: Fusion PC
• Series: Round

• Mix Chamber: No Mix Chamber

GG 25P720

KIT, AIR MOTOR BEARING, REBUILD

Graco 25P720 Radial Piston Air Motor Bearing Rebuild Kit

GG 25P701

KIT, FUSION PC, RETRO, RND, 01

Graco 25P701 Fusion ProConnect Retrofit Kit with Round 01 Mix Chamber and 0.042 in (1.06 mm) Orifice Size

Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold.

• A single cartridge replaces the entire fluid section in seconds
• Sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns

• Model: Fusion PC
• Series: Round

• Includes: PC42RD Mix Chamber Tip

• Mix Chamber: 01 (.042)

GG 25P709

GG 25P721

KIT, AIR MOTOR PISTON, REBUILD

Graco 25P721 Radial Piston Air Motor Piston Rebuild Kit

GG 25P770

REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 10FT

Graco 25P770 10 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2

The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun.

• Light Weight Design

  20% lighter weight than traditional whip hose

• Stainless Steel Braiding
• High Temperature Hose Core and Silicone Wire Protection
• Includes reliable Xtreme Wrap scuff guard

• Model: Reactor 1
• Series: Xtreme Wrap

• Compatible Sprayer: Reactor 1 & 2

• Connection Type: Male x Female

• Hose Diameter (in): 1/4"
• Hose Diameter (mm): 6.35
• Hose Heating Type: External Heated
• Hose Length (ft): 10
• Hose Length (m): 3

• Inside Diameter (in): 1/4

• Material: PTFE

• Maximum Temperature ( degree C): 82
• Maximum Temperature ( degree F): 180

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

GG 25P771

REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 20FT

Graco 25P771 20 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2

The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun.

• Light Weight Design

  20% lighter weight than traditional whip hose

• Stainless Steel Braiding
• High Temperature Hose Core and Silicone Wire Protection
• Includes reliable Xtreme Wrap scuff guard

• Model: Reactor 1
• Series: Xtreme Wrap

• Compatible Sprayer: Reactor 1 & 2

• Connection Type: Male x Female

• Hose Diameter (in): 1/4"
• Hose Diameter (mm): 6.35
• Hose Heating Type: External Heated
• Hose Length (ft): 20
• Hose Length (m): 6

• Inside Diameter (in): 1/4

• Material: PTFE

• Maximum Temperature ( degree C): 82
• Maximum Temperature ( degree F): 180

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

GG 25P772

REACTOR HEATED Hose, Whip 1/4in ID 3500 PSI 10FT

Graco 25P772 10 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2

Graco's Improved Flex heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• Improved Flex design, making it easier to spray in tight areas
• 20% Lighter than previous whip hose
• Includes 18of insulated, non-heated section near gun
• Includes reliable Xtreme Wrap scuff guard

• Model: Reactor 1
• Series: Xtreme Wrap

• Compatible Sprayer: Reactor 1 & 2

• Connection Type: Male x Female

• Hose Diameter (in): 1/4"
• Hose Diameter (mm): 6.35
• Hose Heating Type: External Heated
• Hose Length (ft): 10
• Hose Length (m): 3

• Inside Diameter (in): 0.25

• Material: PTFE

• Maximum Temperature ( degree C): 82
• Maximum Temperature ( degree F): 180

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

GG 25P086

KIT, VALVE, FLAPPER, 4"

Graco 25P086 4-inch 316 SST Flapper Valve Check Kit

GG 25N921

GG 25P851

GG 25P773

REACTOR HEATED HOSE, WHIP, 1/4ID, 3500PSI, 20FT

Graco 25P773 20 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2

Graco's Improved Flex heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• Improved Flex design, making it easier to spray in tight areas
• 20% Lighter than previous whip hose
• Includes 18of insulated, non-heated section near gun
• Includes reliable Xtreme Wrap scuff guard

• Model: Reactor 1
• Series: Xtreme Wrap

• Compatible Sprayer: Reactor 1 & 2

• Connection Type: Male x Female

• Hose Diameter (in): 1/4"
• Hose Diameter (mm): 6.35
• Hose Heating Type: External Heated
• Hose Length (ft): 20
• Hose Length (m): 6

• Inside Diameter (in): 0.25

• Material: PTFE

• Maximum Temperature ( degree C): 82
• Maximum Temperature ( degree F): 180

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

GG 25R000

GG 25P850

GG 25P860

KIT, AIR MOTOR ENDCAP, REBUILD

Graco 25P860 Radial Piston Air Motor End Cap

GG 25R002

GG 25R012

GG 25R087

KIT, FUSION PC, RETRO, RND, 00-01

Graco 25R087 Fusion ProConnect Retrofit Kit with Round 00-01 Mix Chamber and 0.037 in (0.94 mm) Orifice Size

Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while leveraging your existing Fusion AP handle and fluid manifold.

• A single cartridge replaces the entire fluid section in seconds
• Sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns

• Model: Fusion PC
• Series: Round

• Includes: PC37RD Mix Chamber Tip

• Mix Chamber: 00-01 (.037)

GG 25P317

KIT, SDU, SEAL INFL FDA NEO

Graco 25P317 Inflatable Drum Plate Replacement Seal Kit, Neoprene

GG 25R084

FUSION PC GUN, RND, 00-01

Graco 25R084 Fusion ProConnect Gun with Round 00-01 Mix Chamber and 0.037 in (0.94 mm) Orifice Size

A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.

• A single cartridge replaces the entire fluid section in seconds
• Built on top of the time-tested Fusion AP platform, the PC gun sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns
• Retrofit Kit available to convert existing Fusion AP guns

• Model: Fusion PC
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Applicator Type: Manual

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): .037
• Fluid Orifice Size (mm): 1.07

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air Purge Gun
• Gun Weight (g): 1338
• Gun Weight (kg): 1.3
• Gun Weight (lb): 2.95
• Gun Weight (oz): 47

• Impingement Port Size (in): 0.037
• Impingement Port Size (mm): 0.94
• Includes: PC37RD Mix Chamber Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Working Pressure (bar): 245
• Maximum Fluid Working Pressure (MPa): 24.5
• Maximum Fluid Working Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air I

GG 25R085

GG 25R089

KIT, FUSION PC, RETRO, FL, 00, 438

Graco 25R089 Fusion ProConnect Retrofit Kit with Flat 00 Mix Chamber and 0.029 in (0.74 mm) Orifice Size

Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while leveraging your existing Fusion AP handle and fluid manifold.

• A single cartridge replaces the entire fluid section in seconds
• Sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns

• Model: Fusion PC
• Series: Flat

• Includes: PC29RD Mix Chamber Tip

• Mix Chamber: 00 (.029)

GG 25R088

KIT, FUSION PC, RETRO, RND, 03

Graco 25R088 Fusion ProConnect Retrofit Kit Round 03 Mix Chamber and 0.060 in (1.5 mm) Orifice Size

Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while leveraging your existing Fusion AP handle and fluid manifold.

• A single cartridge replaces the entire fluid section in seconds
• Sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns

• Model: Fusion PC
• Series: Round

• Includes: PC60RD Mix Chamber Tip

• Mix Chamber: 03 (.060)

GG 25R457

REGULATOR, BP, AIRPILOT, HIGH-FLOW

Graco 25R457 Low Shear Fluid Back Pressure Regulator, 300 Max psi, 25 gpm Max flow rate, SST, Pneumatic, high wear, sanitary inlet/outlet

Graco's low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.

• Air operated model works with Intelligent Paint Kitchen (IPK) control to reduce energy consumption and paint shear
• Ultralife series ceramic coated parts resist wear and increase service life
• Low profile, compact design and backwards compatibility mean easy installation and replacement

• Compatible Material: Waterborne, Solvent borne

• Gauge Port Size (cm): 0.635
• Gauge Port Size (in): 1/4
• Gauge Port Size (mm): 6.35

• Gauge Port Type: NPT

• Inlet Size (cm): 3.8
• Inlet Size (in): 1.5
• Inlet Size (mm): 38

• Inlet Thread Type: Sanitary Flange

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kg/cm 2): 7
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 25
• Maximum Flow Rate (L/min): 95

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Maximum Regulated Pressure (bar): 17.6
• Maximum Regulated Pressure (kg/cm 2): 17.6
• Maximum Regulated Pressure (kPa): 1724
• Maximum Regulated Pressure (psi): 250

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 21.1
• Maximum Working Pressure (kg/cm 2): 21.1
• Maximum Working Pressure (kPa): 2068
• Maximum Working Pressure (psi): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Regulated Pressure (bar): 1.8
• Minimum Regulated Pressure (kg/cm 2): 1.8
• Minimum Regulated Pressure (kPa): 172
• Minimum Regulated Pressure (MPa): 0.17
• Minimum Regulated Pressure (psi): 25

• Outlet Size (cm): 3.8
• Outlet Size (in): 1.5
• Outlet Size (mm): 38
• Outlet Thread Type: Sanitary Flange

GG 25P587

FUSION PC GUN, RND, 00

Graco 25P587 Fusion ProConnect Gun with Round 00 Mix Chamber and 0.029 in (0.74 mm) Orifice Size

A perfect rebuild in seconds is now possible with the revolutionary Fusion PC (ProConnect) gun, featuring an all-in-one cartridge head that replaces multiple individual parts of the fluid section with a single component. Simply replacing the cartridge completely eliminates the need for a time-consuming traditional rebuild, keeping you spraying and minimizing costly downtime.

• A single cartridge replaces the entire fluid section in seconds
• Built on top of the time-tested Fusion Air Purge platform, the PC gun sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns
• Retrofit Kit available to convert existing Fusion AP guns

• Model: Fusion PC
• Series: Round

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Applicator Type: Manual

• Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
• Component A Inlet Size (cm): 1.27

• Component A Inlet Size (in): 1/2-20
• Component A Inlet Size (mm): 12.7
• Component A Inlet Thread Type: UNF
• Component B Inlet Size (cm): 1.42875
• Component B Inlet Size (in): 9/16-18
• Component B Inlet Size (mm): 14.2875
• Component B Inlet Thread Type: UNF
• Component Type: Plural-Component

• Fluid Orifice Size (cm): 0.107
• Fluid Orifice Size (in): .029
• Fluid Orifice Size (mm): 1.07

• For Use With: Non-Flammable Foam and Polyurea

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air Purge Gun
• Gun Weight (g): 1338
• Gun Weight (kg): 1.3
• Gun Weight (lb): 2.95
• Gun Weight (oz): 47

• Impingement Port Size (in): 0.029
• Impingement Port Size (mm): 0.74
• Includes: PC29RD Mix Chamber Tip

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 130

• Maximum Flow Rate @ PSI (lb/min): 50

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Pressure (bar): 241
• Maximum Fluid Pressure (kPa): 24100
• Maximum Fluid Pressure (MPa): 24.1
• Maximum Fluid Pressure (psi): 3500
• Maximum Fluid Temperature ( degree C): 93
• Maximum Fluid Temperature ( degree F): 200

• Maximum Fluid Working Pressure (bar): 245
• Maximum Fluid Working Pressure (MPa): 24.5
• Maximum Fluid Working Pressure (psi): 3500

• Minimum Air Inlet Pressure (bar): 5.5
• Minimum Air Inlet Pressure (kPa): 550
• Minimum Air

GG 25R013

GG 25R371

GG 25R213

GG 25R349

GEAR,ASSEMBLY, ACID

GG 25P700

KIT, FUSION PC, RETRO, RND, 00

Graco 25P700 Fusion ProConnect Retrofit Kit with Round 00 Mix Chamber and 0.029 in (0.74 mm) Orifice Size

Transform your Fusion Air Purge gun into a Fusion PC with the ProConnect Retrofit Kit, allowing you to take full advantage of what the Fusion PC delivers: A perfect rebuild in seconds. The Retrofit Kit is compatible with all Fusion AP guns and is available in multiple mix chamber sizes. Acquire all the advantages of the revolutionary Fusion ProConnect while utilizing your existing Fusion AP handle and fluid manifold.

• A single cartridge replaces the entire fluid section in seconds
• Sprays exactly like a Fusion AP
• Integrated check valves for cross-over containment
• Eliminates the need to purchase fluid section o-rings
• Spare ProConnect cartridges can replace your back-up guns

• Model: Fusion PC
• Series: Round

• Includes: PC29RD Mix Chamber Tip

• Mix Chamber: 00 (.029)

GG 25R439

GG H43810

GG 102774

GG 116635

GG 127476

GG 127482

GG 15C852

GG 15D564

GG 15D592

GG 15J647

GG 15U938

GG 15J821