Electric

GG YD2880

E-FLO DCI PUMP, 3HP1-48BT-2500CSS-N-0

E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2500 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD2881

E-FLO DCI PUMP, 3HP1-48BT-2500CSS-S-0

E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2500 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD2890

E-FLO DCI PUMP, 3HP1-48BT-2500USIN-0

E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2500 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD2891

E-FLO DCI PUMP, 3HP1-48BT-2500USI-S-0

E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2500 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD3340

E-FLO DCI PUMP, 5HP1-48BT-4000USS-N-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD3341

E-FLO DCI PUMP, 5HP1-48BT-4000USSS-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD3380

E-FLO DCI PUMP, 5HP1-48BT-4000CSS-N-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD3381

E-FLO DCI PUMP, 5HP1-48BT-4000CSS-S-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD3390

E-FLO DCI PUMP, 5HP1-48BT-4000USI-N-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD3391

E-FLO DCI PUMP, 5HP1-48BT-4000USI-S-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 4000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD3540

E-FLO DCI PUMP, 3HP1-48BT-2000USS-N-0

E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD3541

E-FLO DCI PUMP, 3HP1-48BT-2000USS-S-0

E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD3571

E-FLO DCI PUMP, 3HP1-48BT-2000USS-S-ST

Graco YD3571 E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, 380-480 VAC 3 Phase, SST Chrome Lower, Tri-Clamp, Surge Tank, Stand

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate.

Application: Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.

• 3 horse power (HP) motor is modular, so that it can easily replace existing Graco pneumatic or hydraulic pump motors.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• Surge tank lessens pulsation during smooth, rapid changeovers.
• Floor stand has compact footprint with a space-saving vertical design.
• DCi Link connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Cycles Per Gallon: 1.9

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Sanitary Quick Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Sanitary Quick Clamp
• Fluid Section Type: Sealed 4-Ball

• Includes: Basic Controls, Floor Stand

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed 4-Ball

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 10.6
• Maximum Flow Rate (L/min): 40

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature (°C): 40
• Maximum Operating Temperature (°F): 104

• Maximum Working Pressure (bar): 24.1
• Maximum Working Pressure (kPa): 2413.3
• Maximum Working Pressure (MPa): 2.4
• Maximum Working Pressure (psi): 350

• Minimum Operating Temperature (°C): 0
• Minimum Operating Temperature (°F): 32

• Motor Type: AC

• Output Per Cycle (cm³): 2000

• Portable: Non-Portable

• Power Rating (HP): 3

GG YD3580

E-FLO DCI PUMP, 3HP1-48BT-2000CSS-N-0

E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD3581

E-FLO DCI PUMP, 3HP1-48BT-2000CSS-S-0

E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD3590

E-FLO DCI PUMP, 3HP1-48BT-2000USI-N-0

E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD3591

E-FLO DCI PUMP, 3HP1-48BT-2000USIS-0

E-Flo DCi 4-Ball Electric Pump, 2000cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 2000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD4440

E-FLO DCI PUMP, 5HP1-48BT-3000USS-N-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 3000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD4441

E-FLO DCI PUMP, 5HP1-48BT-3000USS-S-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 3000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD4480

E-FLO DCI PUMP, 5HP1-48BT-3000CSS-N-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 3000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD4481

E-FLO DCI PUMP, 5HP1-48BT-3000CSS-S-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Chrome Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 3000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) chrome lower is sealed from outside conditions, so that it needs little to no maintenance.

GG YD4490

E-FLO DCI PUMP, 5HP1-48BT-3000USI-N-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 3000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD4491

E-FLO DCI PUMP, 5HP1-48BT-3000USI-S-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, SiNi, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 3000 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. An annual oil change is all that’s needed to keep the 5 horse power (HP) motor running efficiently. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability. Silicone nitrile (SiNi) checks reduce wear on sheer sensitive materials.

GG YD4540

E-FLO DCI PUMP, 3HP1-48BT-1500USS-N-0

E-Flo DCi 4-Ball Electric Pump, 1500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, No Stand Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 1500 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.

GG YD4541

E-FLO DCI PUMP, 3HP1-48BT-1500USS-S-0

E-Flo DCi 4-Ball Electric Pump, 1500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower’s 1500 cc configuration powers maximum continuous flow rate. Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries. Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors. Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current). DCi Link™ connects via ethernet to your factory’s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent. Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required. Floor/Wall stand has compact footprint with a space-saving vertical design. Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails. ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide. Stainless steel (SST) lower is coated with Ultralife for extensive durability.