Electric

GG 16K907

GG 16K912

GG 16M234

GG 16N838

GG 178229

GG 183097

GG 2005948

GG 26B543

GG 26B544

E-FLO IQ SYSTEM, IQU, SGL, 1H15, 2H0

Graco 26B544 Single E-Flo iQ System for Urethanes, Check-Mate 200cc, Heated 55 Gal., D200s, 15 ft hose

The E-Flo iQ Metering & Dispensing System our tank-to-tip metering system for single component urethanes. This dispensing solution was designed to meter directly from the drum, making it an intelligent system that delivers sustained in-plant performance, minimizes maintenance costs and reduces system complexity.

• Single Heated E-Flo iQ Urethane Supply Sytem
  
  • Delivers consistent control and accurate performance
  • Quiet electric servo-driven motor for lower sound levels
  • Provides continuous dispensing without the need to reload
  • Check-Mate Severe Duty lower for long life and reliable material movement
• High-Quality Heated Hoses
  
  • Graco heated hoses are insulated for an accurate and uniform material temperature.
  • Equipped with 15 ft hose
• Axial Rotating Dispense Valves Suited for Urethane Dispense
  • Triangular head ideal for urethane and sealant dispense for automotive window and windshield glazing
  • Delivers reliable and consistent beads in high flow applications
  • Compact and lightweight design allows for lower payload
  • Rotating valve prevents twining and reduces wear
  • Remote mounted solenoid

• Air Inlet Size (in): 1
• Air Inlet Size (mm): 25

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Rotating Ball/Seat

• Configuration: Single

• Container Size: Drum

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1.0
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gateway: EtherNet/IP User Interface, PROFINET User Interface, PROFIBUS User Interface, DeviceNet User Interface

• Input Cycle Rate (Hz): 50/60

• Material Container Volume (gal): 55
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 125

• Maximum Ambient Temperature (°C): 49
• Maximum Ambient Temperature (°F): 120

• Maximum Flow Rate (cc/min): 5000

• Maximum Flow Rate (L/min): 5.0

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Working Pressure (bar): 240
• Maximum Fluid Working Pressure (MPa): 28
• Maximum Fluid Working Pressure (psi): 3500
• Maximum Hose Length (ft): 15

• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (MPa): 28
• Maximum Working Pressure (psi): 4000

• Minimum Ambient Temperature (°C): 0
• Minimum Ambient Temperature (°F): 32

• Minimum Flow Rate (cc/min): 10
• Minimum Flow Rate (L/min): 0.01

• Minimum Fluid Viscosity (cP): 100000

• Minimum Voltage (V ac): 200

• Phase: 1, 3

• Power Rating (HP): 2.5 hp
• Power Type: Electric, Pneumatic

• Ram Post Diameter (in): 6.5

GG 26B545

E-FLO IQ SYSTEM, IQU, SGL, 1H20, 2H0

Graco 26B545 Single E-Flo iQ System for Urethanes, Check-Mate 200cc, Heated 55 Gal., D200s, 20 ft hose

The E-Flo iQ Metering & Dispensing System our tank-to-tip metering system for single component urethanes. This dispensing solution was designed to meter directly from the drum, making it an intelligent system that delivers sustained in-plant performance, minimizes maintenance costs and reduces system complexity.

• Single Heated E-Flo iQ Urethane Supply Sytem
  
  • Delivers consistent control and accurate performance
  • Quiet electric servo-driven motor for lower sound levels
  • Provides continuous dispensing without the need to reload
  • Check-Mate Severe Duty lower for long life and reliable material movement
• High-Quality Heated Hoses
  
  • Graco heated hoses are insulated for an accurate and uniform material temperature.
  • Equipped with 20 ft hose
• Axial Rotating Dispense Valves Suited for Urethane Dispense
  • Triangular head ideal for urethane and sealant dispense for automotive window and windshield glazing
  • Delivers reliable and consistent beads in high flow applications
  • Compact and lightweight design allows for lower payload
  • Rotating valve prevents twining and reduces wear
  • Remote mounted solenoid

• Air Inlet Size (in): 1
• Air Inlet Size (mm): 25

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Rotating Ball/Seat

• Configuration: Single

• Container Size: Drum

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1.0
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gateway: EtherNet/IP User Interface, PROFINET User Interface, PROFIBUS User Interface, DeviceNet User Interface

• Input Cycle Rate (Hz): 50/60

• Material Container Volume (gal): 55
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 125

• Maximum Ambient Temperature (°C): 49
• Maximum Ambient Temperature (°F): 120

• Maximum Flow Rate (cc/min): 5000

• Maximum Flow Rate (L/min): 5.0

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Working Pressure (bar): 240
• Maximum Fluid Working Pressure (MPa): 28
• Maximum Fluid Working Pressure (psi): 3500
• Maximum Hose Length (ft): 20

• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (MPa): 28
• Maximum Working Pressure (psi): 4000

• Minimum Ambient Temperature (°C): 0
• Minimum Ambient Temperature (°F): 32

• Minimum Flow Rate (cc/min): 10
• Minimum Flow Rate (L/min): 0.01

• Minimum Fluid Viscosity (cP): 100000

• Minimum Voltage (V ac): 200

• Phase: 1, 3

• Power Rating (HP): 2.5 hp
• Power Type: Electric, Pneumatic

• Ram Post Diameter (in): 6.5

GG 26B546

E-FLO IQ SYSTEM, IQU, SGL, 1H10, 2H10

Graco 26B546 Single E-Flo iQ System for Urethanes, Check-Mate 200cc, Heated 55 Gal., D200s, 10 ft hose, 10 ft hose (WIP)

The E-Flo iQ Metering & Dispensing System our tank-to-tip metering system for single component urethanes. This dispensing solution was designed to meter directly from the drum, making it an intelligent system that delivers sustained in-plant performance, minimizes maintenance costs and reduces system complexity.

• Single Heated E-Flo iQ Urethane Supply Sytem
  
  • Delivers consistent control and accurate performance
  • Quiet electric servo-driven motor for lower sound levels
  • Provides continuous dispensing without the need to reload
  • Check-Mate Severe Duty lower for long life and reliable material movement
• High-Quality Heated Hoses
  
  • Graco heated hoses are insulated for an accurate and uniform material temperature.
  • Equipped with a total of 20 ft of hose (one 10 ft hose and one 10 ft hose WIP)
• Axial Rotating Dispense Valves Suited for Urethane Dispense
  • Triangular head ideal for urethane and sealant dispense for automotive window and windshield glazing
  • Delivers reliable and consistent beads in high flow applications
  • Compact and lightweight design allows for lower payload
  • Rotating valve prevents twining and reduces wear
  • Remote mounted solenoid

• Air Inlet Size (in): 1
• Air Inlet Size (mm): 25

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Rotating Ball/Seat

• Configuration: Single

• Container Size: Drum

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1.0
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gateway: EtherNet/IP User Interface, PROFINET User Interface, PROFIBUS User Interface, DeviceNet User Interface

• Input Cycle Rate (Hz): 50/60

• Material Container Volume (gal): 55
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 125

• Maximum Ambient Temperature (°C): 49
• Maximum Ambient Temperature (°F): 120

• Maximum Flow Rate (cc/min): 5000

• Maximum Flow Rate (L/min): 5.0

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Working Pressure (bar): 240
• Maximum Fluid Working Pressure (MPa): 28
• Maximum Fluid Working Pressure (psi): 3500
• Maximum Hose Length (ft): 20

• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (MPa): 28
• Maximum Working Pressure (psi): 4000

• Minimum Ambient Temperature (°C): 0
• Minimum Ambient Temperature (°F): 32

• Minimum Flow Rate (cc/min): 10
• Minimum Flow Rate (L/min): 0.01

• Minimum Fluid Viscosity (cP): 100000

• Minimum Voltage (V ac): 200

• Phase: 1, 3

• Power Rating (HP): 2.5 hp
• Power Type: Electric, Pneumatic

• Ram Post Diameter (in): 6.5

GG 26B547

E-FLO IQ SYSTEM, IQU, SGL, 1H10, 2H15

Graco 26B547 Single E-Flo iQ System for Urethanes, Check-Mate 200cc, Heated 55 Gal., D200s 15 ft hose, 10 ft hose (WIP)

The E-Flo iQ Metering & Dispensing System our tank-to-tip metering system for single component urethanes. This dispensing solution was designed to meter directly from the drum, making it an intelligent system that delivers sustained in-plant performance, minimizes maintenance costs and reduces system complexity.

• Single Heated E-Flo iQ Urethane Supply Sytem
  
  • Delivers consistent control and accurate performance
  • Quiet electric servo-driven motor for lower sound levels
  • Provides continuous dispensing without the need to reload
  • Check-Mate Severe Duty lower for long life and reliable material movement
• High-Quality Heated Hoses
  
  • Graco heated hoses are insulated for an accurate and uniform material temperature.
  • Equipped with a total of 25 ft of hose (one 15 ft hose and one 10 ft hose WIP)
• Axial Rotating Dispense Valves Suited for Urethane Dispense
  • Triangular head ideal for urethane and sealant dispense for automotive window and windshield glazing
  • Delivers reliable and consistent beads in high flow applications
  • Compact and lightweight design allows for lower payload
  • Rotating valve prevents twining and reduces wear
  • Remote mounted solenoid

• Air Inlet Size (in): 1
• Air Inlet Size (mm): 25

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Rotating Ball/Seat

• Configuration: Single

• Container Size: Drum

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1.0
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gateway: EtherNet/IP User Interface, PROFINET User Interface, PROFIBUS User Interface, DeviceNet User Interface

• Input Cycle Rate (Hz): 50/60

• Material Container Volume (gal): 55
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 125

• Maximum Ambient Temperature (°C): 49
• Maximum Ambient Temperature (°F): 120

• Maximum Flow Rate (cc/min): 5000

• Maximum Flow Rate (L/min): 5.0

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Working Pressure (bar): 240
• Maximum Fluid Working Pressure (MPa): 28
• Maximum Fluid Working Pressure (psi): 3500
• Maximum Hose Length (ft): 25

• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (MPa): 28
• Maximum Working Pressure (psi): 4000

• Minimum Ambient Temperature (°C): 0
• Minimum Ambient Temperature (°F): 32

• Minimum Flow Rate (cc/min): 10
• Minimum Flow Rate (L/min): 0.01

• Minimum Fluid Viscosity (cP): 100000

• Minimum Voltage (V ac): 200

• Phase: 1, 3

• Power Rating (HP): 2.5 hp
• Power Type: Electric, Pneumatic

• Ram Post Diameter (in): 6.5

GG 26B548

E-FLO IQ SYSTEM, IQU, SGL, 1H10, 2H20

Graco 26B548 Single E-Flo iQ System for Urethanes, Check-Mate 200cc, Heated 55 Gal., D200s, 20 ft hose, 10 ft hose (WIP)

The E-Flo iQ Metering & Dispensing System our tank-to-tip metering system for single component urethanes. This dispensing solution was designed to meter directly from the drum, making it an intelligent system that delivers sustained in-plant performance, minimizes maintenance costs and reduces system complexity.

• Single Heated E-Flo iQ Urethane Supply Sytem
  
  • Delivers consistent control and accurate performance
  • Quiet electric servo-driven motor for lower sound levels
  • Provides continuous dispensing without the need to reload
  • Check-Mate Severe Duty lower for long life and reliable material movement
• High-Quality Heated Hoses
  
  • Graco heated hoses are insulated for an accurate and uniform material temperature.
  • Equipped with a total of 30 ft of hose (one 20 ft hose and one 10 ft hose WIP)
• Axial Rotating Dispense Valves Suited for Urethane Dispense
  • Triangular head ideal for urethane and sealant dispense for automotive window and windshield glazing
  • Delivers reliable and consistent beads in high flow applications
  • Compact and lightweight design allows for lower payload
  • Rotating valve prevents twining and reduces wear
  • Remote mounted solenoid

• Air Inlet Size (in): 1
• Air Inlet Size (mm): 25

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Rotating Ball/Seat

• Configuration: Single

• Container Size: Drum

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1.0
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gateway: EtherNet/IP User Interface, PROFINET User Interface, PROFIBUS User Interface, DeviceNet User Interface

• Input Cycle Rate (Hz): 50/60

• Material Container Volume (gal): 55
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 125

• Maximum Ambient Temperature (°C): 49
• Maximum Ambient Temperature (°F): 120

• Maximum Flow Rate (cc/min): 5000

• Maximum Flow Rate (L/min): 5.0

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Temperature (°C): 70
• Maximum Fluid Temperature (°F): 158
• Maximum Fluid Viscosity (cP): 3000000

• Maximum Fluid Working Pressure (bar): 240
• Maximum Fluid Working Pressure (MPa): 28
• Maximum Fluid Working Pressure (psi): 3500
• Maximum Hose Length (ft): 30

• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (MPa): 28
• Maximum Working Pressure (psi): 4000

• Minimum Ambient Temperature (°C): 0
• Minimum Ambient Temperature (°F): 32

• Minimum Flow Rate (cc/min): 10
• Minimum Flow Rate (L/min): 0.01

• Minimum Fluid Viscosity (cP): 100000

• Minimum Voltage (V ac): 200

• Phase: 1, 3

• Power Rating (HP): 2.5 hp
• Power Type: Electric, Pneumatic

• Ram Post Diameter (in): 6.5

GG 26B549

GG 26B550

GG 26B551

GG 26B552

GG 26B553

GG 26B555

GG 26B558

GG 26B559

GG 26D416

E-FLO SP SUB MODEL UNIDRUM SUPPLY UNIT, 1KL, LH, CST, ED430CS, 400V

Graco 26D416 UniDrum, E-Flo SP, 19:1, 430cc, 1000 Liter, Carbon Steel, Severe Duty, 400v, Left Handed Supply, Customer Supplied 24V DC

Electric-powered bulk supply reliably delivers one-component sealants, adhesives and other medium to high viscosity materials from 1000 liter (264 gallon) drums to factory metering and dispensing systems. Manufacturers who purchase this particular system provide their own 24 volt direct current (DC) power.

• E-Flo SP electric supply pump is powered by an electric driver that provides real-time, integrated, closed-loop flow control.
• Since the electric motor operates much more quietly than pneumatic or air-operated motors, the supply can be placed closer to the point of application. This requires less pressure for accurate and consistent meter and dispense.
• Severe Duty construction protects equipment from harsh materials.

• Model: UniDrum

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Spray, Fluid Transfer, Unloading

• Configuration: Left

• Container Type: Magna Drum
• Control Options: Elec/Pneumatic

• Material Container Volume: 1000 Liters
• Material Container Volume (gal): 264
• Material Container Volume (l): 1000

• Maximum Air Inlet Pressure (bar): 6.55
• Maximum Air Inlet Pressure (kg/cm²): 6.68
• Maximum Air Inlet Pressure (psi): 95

• Maximum Flow Rate (GPM): 2.8
• Maximum Flow Rate (L/min): 10.8

• Maximum Fluid Pressure (bar): 131
• Maximum Fluid Pressure (kPa): 131000
• Maximum Fluid Pressure (MPa): 13.1
• Maximum Fluid Pressure (psi): 1900

• Maximum Fluid Pressure (bar): 131
• Maximum Fluid Pressure (kPa): 131000
• Maximum Fluid Pressure (MPa): 13.1
• Maximum Fluid Pressure (psi): 1900

• Maximum Height (cm): 358.1
• Maximum Height (ft): 11.75
• Maximum Height (in): 141
• Maximum Height (m): 3.58
• Maximum Height (mm): 3581

• Maximum Operating Temperature (°C): 49
• Maximum Operating Temperature (°F): 120

• Maximum Working Pressure (bar): 131
• Maximum Working Pressure (kPa): 131000
• Maximum Working Pressure (MPa): 13.1
• Maximum Working Pressure (psi): 1900

• Minimum Ambient Temperature (°C): 1

• Minimum Height (cm): 216.4
• Minimum Height (ft): 7.1
• Minimum Height (in): 85.2
• Minimum Height (m): 2.16
• Minimum Height (mm): 2164

• Number of Wipers: 2

• Overall Depth (cm): 129.5
• Overall Depth (in): 51
• Overall Depth (mm): 1295

• Overall Width (cm): 175.3
• Overall Width (in): 69
• Overall Width (mm): 1753

• Power Type: Electric

• Pump Ratio: 19:1
• Pump Type: Double Ball

GG 26D417

GG EC100CM1

GG EC100CM2