High output motor for demanding sanding applications
Heavy duty low profile head for superior durability
Tool not supplied with backing pad as shown
Air Inlet Size: 1/4 in Exhaust: Front Tool Configuration: Right Angle Type Housing: Composite Weight (lbs): 3.97 lb All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches
For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
Air Inlet Size: 1/4 in Exhaust: Rear Tool Configuration: Right Angle Type Housing: Composite Weight (lbs): 2.5 lb All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
Can be customized with multiple extensions for access to the most far-reaching areas
Multiple industrial bearings provides optimal balance and power transfer
Designed to work comfortably with the operator
Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)
Air Inlet Size: 1/4 in Exhaust: Rear Tool Configuration: Inline Type Housing: Composite Weight (lbs): 4.19 lb All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration
Can be customized with multiple extensions for access to the most far-reaching areas
Multiple industrial bearings provides optimal balance and power transfer
Designed to work comfortably with the operator
Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)
Air Inlet Size: 1/4 in Exhaust: Rear Tool Configuration: Inline Type Housing: Composite Weight (lbs): 5.3 lb All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration
High output motor for demanding sanding applications
Heavy duty low profile head for superior durability
Tool not supplied with backing pad as shown
Air Inlet Size: 1/4 in Exhaust: Front Type Housing: Composite Weight (lbs): 3.31 lb All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches
Designed for precision deburring and metal removal
Compact and light weight composite housing
Roll throttle equipped
Air Inlet Size: 1/8 in Exhaust: Rear Tool Configuration: Inline Type Housing: Composite Weight (lbs): 0.22 lb Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose
Can be customized with multiple extensions for access to the most far-reaching areas
Multiple industrial bearings provides optimal balance and power transfer
Designed to work comfortably with the operator
Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)
Air Inlet Size: 1/4 in Exhaust: Rear Tool Configuration: Inline Type Housing: Composite Weight (lbs): 4.19 lb All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration
Can be customized with multiple extensions for access to the most far-reaching areas
Multiple industrial bearings provides optimal balance and power transfer
Designed to work comfortably with the operator
Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)
Air Inlet Size: 1/4 in Exhaust: Rear Tool Configuration: Inline Type Housing: Composite Weight (lbs): 6.6 lb All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals.
Air Inlet Size: 1/8 in Tool Configuration: Inline Weight (lbs): 1.41 lb General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals.
Air Inlet Size: 1/8 in Tool Configuration: Inline Weight (lbs): 1.41 lb General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals.
Air Inlet Size: 1/8 in Tool Configuration: Inline Weight (lbs): 1.3 lb General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals.
Air Inlet Size: 1/8 in Tool Configuration: Inline Weight (lbs): 1.5 lb General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals.
Air Inlet Size: 1/8 in Tool Configuration: Inline Weight (lbs): 1.5 lb General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
P Handle shaped so force can be applied for prevailing torque
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.43 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
P Handle shaped so force can be applied for prevailing torque fasteners
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.41 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Side handle on 19PTA15Q. All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
P Handle shaped so force can be applied for prevailing torque
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.5 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals
Air Inlet Size: 1/8 in Tool Configuration: Right Angle Weight (lbs): 1.9 lb Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Manual and all torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals
Air Inlet Size: 1/8 in Tool Configuration: Right Angle Weight (lbs): 1.81 lb Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Manual and all torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
P Handle shaped so force can be applied for prevailing torque fasteners
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.65 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Side handle on 19PTA15Q. All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
P Handle shaped so force can be applied for prevailing torque fasteners
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.41 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Side handle on 19PTA15Q. All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
P Handle shaped so force can be applied for prevailing torque
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.5 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
P Handle shaped so force can be applied for prevailing torque fasteners
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.5 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Side handle on 19PTA15Q. All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals
Air Inlet Size: 1/8 in Tool Configuration: Right Angle Weight (lbs): 1.9 lb Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Manual and all torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
2 grip sizes available for added versatility
P Handle shaped so force can be applied for prevailing torque fasteners
Reverse lever can be rotated to accommodate left-or-right-handed operators
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Air Inlet Size: 1/4 in Tool Configuration: Pistol Weight (lbs): 1.92 lb General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Side handle on 19PTA15Q. All torque springs required to meet indicated torque specification
Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
Lightweight, ergonomic and durable handle designed with operator in mind
Engineered to suit a wide range of applications, from high volume assembly to aerospace
Grip material tested to withstand a range of industrial chemicals
Air Inlet Size: 1/8 in Tool Configuration: Right Angle Weight (lbs): 1.9 lb Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Manual and all torque springs required to meet indicated torque specification