Search
CLECO S10555
CLECO S10555 branded products
1/4 Hex Dr X T-40 Torx Hex X 3-1/2 Torx Hex Drive
AX 49-B-TX-40
AX 49-B-TX-40
BIT 1/4 HEX PWRDR T40 TX 3-1/2" 89MM OAL1/4" Hex Power Drive - Torx Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
- Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
- Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
- Weight: 0.062 lb
- Drive: Hex Power Drive
- Drive Size: T-40
- Fastener Type: Torx
- Measurement Across Lobes: .260 in
- Overall Length: 3.5 in, 89.0 mm
- Set: No
- SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
Call for pricing
Adapter. Hex to 1/2" Sq. Drive
AX A-516
AX A-516
ADAPT 1/2 MALE HEX DR 1/2 SQ 1-5/32" OALSocket & Ratchet Wrench Adapters, SAE
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.072 lb
- Male Hex Size: 1/2 in
- Male Square Drive (in): 1/2 in
- Overall Length: 1.09 in
- Set: No
Call for pricing
Floating Adapter, Guided Size 2, 3/4
AX S308450
AX S308450
Floating Adapter, Guided Size 2, 3/4
Call for pricing
M12X1.0 THREADED DRIVE, 3/8" FEMALE HEX SOCKET, 1.26"OVERALL LENGTH WRENCH FLATS ON NOSE END
AX-CUSTOM SOCKET
AX-CUSTOM SOCKET
M12X1.0 THREADED DRIVE, 3/8" FEMALE HEX SOCKET, 1.26"OVERALL LENGTH WRENCH FLATS ON NOSE END
Call for pricing
Blade,2in Saw,60T
DC 14-1889
DC 14-1889
BLADE 2" SAW, 60TUsed on Cleco Dotco Saws
- Used on Cleco Dotco Saws
$21.10
Router Guide
DC 14-2401
DC 14-2401
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16â€+C+P (series 12-10); OAL = 2â€+C+P (series 12-20 & 12-25). “C†is the “C†dimension of the router guide and “P†is the desired protrusion of the router bit.
- Important: Insert bit into collet as far as possible, then pull out 1/16†and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4â€, be sure to insert a short length of blank shank (not to exceed 5/8†long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2402
DC 14-2402
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16â€+C+P (series 12-10); OAL = 2â€+C+P (series 12-20 & 12-25). “C†is the “C†dimension of the router guide and “P†is the desired protrusion of the router bit.
- Important: Insert bit into collet as far as possible, then pull out 1/16†and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4â€, be sure to insert a short length of blank shank (not to exceed 5/8†long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Attachment
DC 14-2429
DC 14-2429
ATCH ROUTERFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$219.00
Guide
DC 14-2502
DC 14-2502
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16â€+C+P (series 12-10); OAL = 2â€+C+P (series 12-20 & 12-25). “C†is the “C†dimension of the router guide and “P†is the desired protrusion of the router bit.
- Important: Insert bit into collet as far as possible, then pull out 1/16†and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4â€, be sure to insert a short length of blank shank (not to exceed 5/8†long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
5ft Hose Assy
DC 45-0948
DC 45-0948
HOSE 5'3/16†& 1/4†hoses have braided covers, all others have neoprene covers.
$48.00
Grease
DC 45-0983
DC 45-0983
GREASE GEAR, DOTCO, 2 OZ.Under normal conditions of use, lubrication products sold separately for or used within these tools should not cause an exposure hazard. Refer to the Material Safety Data Sheet M.S.D.S. for Safety and Disposal information. M.S.D.S. sheets shown in the chart are available upon request.
$8.90
Payment options
