Airpower | CLECO S10555 branded products

1/4 Hex Insert Bit X T-45 Torx X 1-1/4

AX 440-TX-45X

BIT 1/4 HEX INS T45 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$6.59

1/4 Hex Slotted Insert X 3F-4R X 1

AX 445-0X

BIT 1/4 HEX INS 3F-4R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb
Blade Thickness: .030 in
Blade Width: 0.154 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4", Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 3F-4R
Set: No

$3.03

1/4 Hex Insert Bit X T-25-H Torx Hex(TR)

AX 440-TX-25-H

BIT 1/4 HEX INS T25 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-25-H
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$8.56

1/4 Hex Slotted Insert X 1F-2R X 1

AX 445-000X

BIT 1/4 HEX INS 1F-2R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.010 lb
Blade Width: 0.125 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4" Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 1F-2R
Set: No

$2.98

1/4 Hex Insert Bit X T-08-H Torx (TR)

AX 440-TX-08-H

BIT 1/4 HEX INS T8 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-8-H
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.02

1/4 Hex Insert Bit X T-50 Torx X 1 1/4

AX 440-TX-50X

BIT 1/4 HEX INS T50 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.027 lb

Drive: Hex Insert
Drive Size: T-50
Fastener Type: Torx

Measurement Across Lobes: .346 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.21

1/4 Hex Insert Bit X T-30 Torx Hex X 1

AX 440-TX-30X

BIT 1/4 HEX INS T30 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.013 lb

Drive: Hex Insert
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

1/4 Hex Insert X #4Pt Phillips X 1-5/16

AX 440-4X

BIT 1/4 HEX INS #4 PH 1-5/16" 33MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 7.658 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.31 in, 33.0 mm
Point Size: 4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$4.01

1/4 Hex Slotted Insert X 4F-5R X 1

AX 445-10X

BIT 1/4 HEX INS 4F-5R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb
Blade Thickness: .034 in
Blade Width: 0.185 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4", Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 4F-5R
Set: No

$4.28

1/4 Hex Slotted Insert X 4F-5R X 1

AX 445-1X

BIT 1/4 HEX INS 4F-5R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.19 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 4F-5R
Set: No

$2.69

1/4 Hex Slotted Insert X 5F-6R X 1 1/2

AX 445-20-15X

BIT 1/4 HEX INS 5F-6R SLOT 1-1/2" 38MM
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.015 lb
Blade Width: 0.216 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.5 in, 38.0 mm
Screw Size: 5F-6R
Set: No

$4.28

1/4 Hex Slotted Insert X 5F-6R X 1

AX 445-20X

BIT 1/4 HEX INS 5F-6R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.012 lb
Blade Thickness: .036 in
Blade Width: 0.216 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 5F-6R
Set: No

$4.28

1/4 Hex Slotted Insert X 8F-10R X 1

AX 445-3X

BIT 1/4 HEX INS 8F-10R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.25 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 8F-10R
Set: No

$3.92

1/4 Hex Slotted Insert X 6F-8R X 1

AX 445-2X

BIT 1/4 HEX INS 6F-8R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.22 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 6F-8R
Set: No

$2.56

1/4 Hex Slotted Insert X 10F-12R X 1

AX 445-4X

BIT 1/4 HEX INS 10F-12R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.28 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 10F-12R
Set: No

$3.92

1/4 Hex Insert Bit X #0 Phillips X 1, 25mm OAL, 25/Min

AX 446-0I

1/4 Hex Insert Bit X #0 Phillips X 1, 25mm OAL, 25/Min

$8.28

1/4 Hex Insert Bit X #1 Phillips X 1

AX 446-1X

BIT 1/4 HEX INS #1 PH 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.010 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 1
Screw Size: 2,3,4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.31

1/4 Hex Insert Bit X #2 Phillips X 3

AX 446-23T

BIT 1/4 HEX INS #2 PH 3" 76MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.027 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 3.0 in, 76.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$3.37

Bit, 1/4 Hex Drive Insert 2 Phillips

AX 446-2-ACR2X

BIT 1/4 HEX INS #2 PH ACR 1" 25MM OAL
1/4" Hex Insert Bits - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Weight: 0.011 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$3.04

AX 446-215T

BIT 1/4 HEX INS #2 PH 1-1/2" 38MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.014 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.5 in, 38.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.45

5/16 Hex Insert X #1 Phillips X 1-1/4

AX 480-1X

BIT 5/16 HEX INS #1 PH 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.022 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.25 in, 32.0 mm
Screw Size: 1
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.41

1/4 Hex Insert Bit X T-10 Torq Hex X 1

AX 440-TX-10X

BIT 1/4 HEX INS T10 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.02

1/4 Hex Insert Bit X T-27 Torx Hex X 1

AX 440-TX-27X

BIT 1/4 HEX INS T27 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

5/16 Hex Insert X #4 Phillips X 1-1/4

AX 480-4X

BIT 5/16 HEX INS #4 PH 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.025 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.25 in, 32.0 mm
Screw Size: 4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.48

AX 446-22T-PZDX

1/4in Hex Bit

$9.56

AX 480-TX-25X

BIT 5/16 HEX INS T-25 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

AX 480-2X

BIT 5/16 HEX INS #2 PH 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.023 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.25 in, 32.0 mm
Screw Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.19

5/16 Hex Insert X T-30 Torx Hex X 1-1/4

AX 480-TX-30X

BIT 5/16 HEX INS T-30 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.023 lb

Drive: Hex Insert
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

AX 446-3X

BIT 1/4 HEX INS #3 PHILLIPS 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 3
Screw Size: 12,14
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.77

5/16 Hex Insert X T-40 Torx Hex X 1-1/4

AX 480-TX-40X

BIT 5/16 HEX INS T-40 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.025 lb

Drive: Hex Insert
Drive Size: T-40
Fastener Type: Torx

Measurement Across Lobes: .260 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

AX 480-TSQ-6M

BIT 5/16 HEX INS 6MM TRIPSQ 1-1/4" 32MM
5/16" Hex Insert Bits - Triple Square Bits

Weight: 0.024 lb

Drive: Hex Insert
Fastener Type: Triple Square

Overall Length: 1.25 in, 32.0 mm
Point Size: 6mm
Set: No

$30.60

AX 480-TX-27X

BIT 5/16 INSERT T27 TORX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.32

5/16 Hex Insert X T-45-H Torx Hex (TR)*

AX 480-TX-45-H

BIT 5/16 HEX INS T-45 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.026 lb

Drive: Hex Insert
Drive Size: T-45-H
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.55

AX 4502840376

6.32 X 1/8 Set Screw

$0.85

7/16 Hex Drive Bit Holder X 1/4 Hex

AX 488

BIT HLDR 7/16 HEX DR 1/4 HEX 2 3/4 OAL
7/16" Hex Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.108 lb
Description: For 1/4" hex inserts

Drive: Hex Drive

Magnetism: Non-Magnetic

Overall Length: 2.75 in, 70.0 mm
Set: No

$19.81

5/16 Hex Insert X T-45 Torx Hex X 1-1/4

AX 480-TX-45X

BIT 5/16 HEX INS T-45 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.027 lb

Drive: Hex Insert
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.95

1/4 Phillips #0 Hex Power Drive Bit

AX 4910-AX

BIT 1/4 HEX PWR DR #0 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.016 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Screw Size: 0
Set: No

$3.52

1/4 Hex Drive X #2 Phillips X 2-3/4

AX 492-AX

BIT 1/4 HEX PWR DR #2 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.033 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 2
Set: No

$2.54

Bit, 1/4 Hex Pwr Dr #27 PH, 1-15/16, 49MM

AX 492-27X

BIT 1/4 HEX PWR DR #27 PH 1-15/16" 49MM
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.026 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Point Size: 2
Set: No

$2.48

5/16 Hex Slotted InsertX 10F-14R X1-1/2

AX 485-5X

BIT 5/16HEX INS 12F-14R SLOT 1-1/2" 38MM
5/16" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.032 lb
Blade Width: 0.328 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.5 in, 38.0 mm
Screw Size: 12F-14R
Set: No

$4.76

Torx Bit, 7/16 Hex Power Drive, T-45

AX 48-TX-45

BIT 7/16 HEX PWR DR T45 TORX 3-1/2" 89MM
7/16" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.101 lb

Drive: Hex Power Drive
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$32.05

1/4 Hex Drive X #1 Phillips X 2-3/4

AX 491-AX

BIT 1/4 HEX PWR DR #1 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.024 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 1
Set: No

$2.92

1/4 Hex Drive X #3 Phillips X 2-3/4

AX 493-AX

BIT 1/4 HEX PWR DR #3 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.046 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 3
Set: No

$2.58

Nutrunner, R/A, 136 NM, 195 RPM

CL 55RNL-3T-4

NUTRUNNER

Up to 325 ftlbs / 440 Nm

Engineered for performance, durability, mounting versatility, and serviceability

Torque can be adjusted by adjusting air pressure

Heavy duty motor, gearing and angle head for long life

Tool can be reversed if required

Torque reaction plate supplied with 75 series.

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb

GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)

$4,650.00

Nut Runner, Right Angle, 1/2 In Sq Dr, 26-64 Ft Lbs, 280 RPM

CL 55RNAL-4T-4

NUTRUNNER

26 - 305 ftls / 35 - 410 Nm

Heavy-duty Cleco motor is the industry standard for reliability

Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle

Planetary gears designed for tool speed changes with minimal parts service and replacement

Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.

External Torque Adjustment

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb

General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.

$5,259.80

Angle Nut Runner

CL 55RNAL-3T-4

NUTRUNNER

26 - 305 ftls / 35 - 410 Nm

Heavy-duty Cleco motor is the industry standard for reliability

Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle

Planetary gears designed for tool speed changes with minimal parts service and replacement

Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.

External Torque Adjustment

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb

General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.

$5,259.80

Nut Driver 30 - 67 FT.LBS

CL 55RNAL-2-4

NUTRUNNER

25 - 67 ftls / 34 - 91Nm - Use with Torque Reaction

Engineered for performance, durability, mounting versatility, and serviceability

Durable Clecomatic shut off clutch delivers best in class torque repeatability

Heavy duty motor, gearing and clutch for long life

Torque reaction bar supplied with tool

Air Inlet Size: 1/2 in
Tool Configuration: Inline
Weight (lbs): 6.5 lb

General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769

$5,642.00

Cable, Field, Options, 19 Pin, M23, 25M

CL 572971PT-250

Cable, Field, Options, 19 Pin, M23, 25M

$2,670.00

Nutrunner, Stall, Lever, 41 Ft Lbs Max, 490 Rpm

CL 55RNL-7T-4

NUTRUNNER

Up to 325 ftlbs / 440 Nm

Engineered for performance, durability, mounting versatility, and serviceability

Torque can be adjusted by adjusting air pressure

Heavy duty motor, gearing and angle head for long life

Tool can be reversed if required

Torque reaction plate supplied with 75 series.

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 6.1 lb

GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)

$4,231.50

Nutsetter, Pistol, Swingbar, Stall, Direct Drive, 3/4 Drive, 83-111 Ft Lb

CL 64TTS150D6

NUTSTR PISTOL SWINGBAR

High power-to-weight ratio and slim profile nose delivers more torque to hard-to-reach joints

High power-to-weight ratio and slim profile nose delivers more torque to hard-to-reach joints

Heavy-duty gearing is designed to withstand high torque output

Top and bottom air inlets adds versitility in manufacturing

Light weight with soft-touch handle for improved ergonomics

Air Inlet Size: 3/8 in
Tool Configuration: Pistol
Weight (lbs): 8.2 lb

General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar Steel Torque Reaction Bar (tools rated above 50 ft. lbs) Slave Square Drive (64TTS3850D12 & 64TTK3850D12)

Call for pricing

Angle Nutrunner, 145 Rpm, Stall, Reversible, 130 ft Lbs Max, 1/2 Sq Dr

CL 55RNL-2T-4

NUTRUNNER

Up to 325 ftlbs / 440 Nm

Engineered for performance, durability, mounting versatility, and serviceability

Torque can be adjusted by adjusting air pressure

Heavy duty motor, gearing and angle head for long life

Tool can be reversed if required

Torque reaction plate supplied with 75 series.

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb

GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)

$4,468.10

SEAL

CL 60G147

SEAL

$82.00

SEAL

CL 60G144

SEAL

$70.00

Nutrunner

CL 55RNL-4T-4

NUTRUNNER

Up to 325 ftlbs / 440 Nm

Engineered for performance, durability, mounting versatility, and serviceability

Torque can be adjusted by adjusting air pressure

Heavy duty motor, gearing and angle head for long life

Tool can be reversed if required

Torque reaction plate supplied with 75 series.

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb

GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)

$4,231.50

SEAL

CL 60G115

SEAL

$127.00

NEOTEK DC TOOL 92-443 FT/LBS 190 RPM

CL 70EAN600SA8T

NUTSTR, 70 SERIES AH - 600NM

Durability and unsurpassed RPM for high torque applications up to 4000 Nm

Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%

Configurable LED light rings

Flexible high torque solutions

60% speed increase over current legacy series tools

Tool Configuration: Inline
Weight (lbs): 23.9 lb

Note: 70 Series Tools require a 220/230 power supply to the controller

Call for pricing

Socket, 3/4 In, SQ Dr, 3/4 HE X 4 OAL

CL 7524

3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 4 in

$114.10

3/4in Nutrunner, 150-305 Ft-Lb, 80 Rpm

CL 75RNAL-2X-6

NUTRUNNER

26 - 305 ftls / 35 - 410 Nm

Heavy-duty Cleco motor is the industry standard for reliability

Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle

Planetary gears designed for tool speed changes with minimal parts service and replacement

Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.

External Torque Adjustment

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 15 lb

General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.

$8,945.30

NutRunner, Angle, 1/2" Square Drive

CL 75RNAL-2V-4

NutRunner, Angle, 1/2" Square Drive

$8,945.30

NutRunner

CL 75RNAL-3V-4

NUTRUNNER

26 - 305 ftls / 35 - 410 Nm

Heavy-duty Cleco motor is the industry standard for reliability

Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle

Planetary gears designed for tool speed changes with minimal parts service and replacement

Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.

External Torque Adjustment

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb

General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.

$8,945.30

Nutrunner

CL 75RNL-2X-6

NUTRUNNER

Up to 325 ftlbs / 440 Nm

Engineered for performance, durability, mounting versatility, and serviceability

Torque can be adjusted by adjusting air pressure

Heavy duty motor, gearing and angle head for long life

Tool can be reversed if required

Torque reaction plate supplied with 75 series

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 13.1 lb

GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)

$7,407.40

Nutrunner, Stall, Rev, Lever Start, 1/2 Sq Dr

CL 75RNL-3V-4

NUTRUNNER

Up to 325 ftlbs / 440 Nm

Engineered for performance, durability, mounting versatility, and serviceability

Torque can be adjusted by adjusting air pressure

Heavy duty motor, gearing and angle head for long life

Tool can be reversed if required

Torque reaction plate supplied with 75 series

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 11.4 lb

GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)

$7,407.40

Nutrunner 3/4in

CL 75RNAL-3X-6

NUTRUNNER

26 - 305 ftls / 35 - 410 Nm

Heavy-duty Cleco motor is the industry standard for reliability

Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle

Planetary gears designed for tool speed changes with minimal parts service and replacement

Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.

External Torque Adjustment

Air Inlet Size: 1/2 in
Tool Configuration: Right Angle
Weight (lbs): 15 lb

General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.

$8,945.30

Pulse Nutrunner

CL 7PTHH35Q

PULSNTS

Market leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port

Durable, Economical low maintenance

Adaptor 935472 available 3/8in Square to 7/16" Quick Change

Air Inlet Size: 1/4 in
Drive Type: Quick Change
Tool Configuration: Pistol
Weight (lbs): 1.74 lb

7/16 Quick Change Chuck available separately as an accessory

$3,544.45

Shutoff Pulse, Pistol, 1/2 Sq Dr, 50-80 nm

CL 80PTHH354

PULSNTS

Market leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port

Durable, Economical low maintenance

Adaptor 935472 available 3/8in Square to 7/16" Quick Change

Air Inlet Size: 1/4 in
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 3.09 lb

7/16 Quick Change Chuck available separately as an accessory

$4,231.50

1/2 Shotoff Pulse, Pistol Grip, 4-120Nm

CL 80PTHHA354

PULSNTS

Market leadin. repeatability unmatched accuracy. low maintenance, inertia shut-off. low noise level, efficient 3 chamber air motor. external speed control, oil less blades reversible torque signal port

Durable, Economical low maintenance

Adaptor 935472 available 3/8 inch Square to 7/16 inch Quick Change

Air Inlet Size: 1/4 in
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 3.31 lb

7/16 Quick Change Chuck available separately as an accessory

$4,677.40

Spring Return

CL 832595

Spring Return

$5.50

Chisel (6.75 Lg)

CL 839050

CHISEL (6.75 LG)

For use with B1 Series Chisels

$37.00

CLECO S10555

AX 440-TX-45X

AX 445-0X

AX 440-TX-25-H

AX 445-000X

AX 440-TX-08-H

AX 440-TX-50X

AX 440-TX-30X

AX 440-4X

AX 445-10X

AX 445-1X

AX 445-20-15X

AX 445-20X

AX 445-3X

AX 445-2X

AX 445-4X

AX 446-0I

AX 446-1X

AX 446-23T

AX 446-2-ACR2X

AX 446-215T

AX 480-1X

AX 440-TX-10X

AX 440-TX-27X

AX 480-4X

AX 446-22T-PZDX

AX 480-TX-25X

AX 480-2X

AX 480-TX-30X

AX 446-3X

AX 480-TX-40X

AX 480-TSQ-6M

AX 480-TX-27X

AX 480-TX-45-H

AX 4502840376

AX 488

AX 480-TX-45X

AX 4910-AX

AX 492-AX

AX 492-27X

AX 485-5X

AX 48-TX-45

AX 491-AX

AX 493-AX

CL 55RNL-3T-4

CL 55RNAL-4T-4

CL 55RNAL-3T-4

CL 55RNAL-2-4

CL 572971PT-250

CL 55RNL-7T-4

CL 64TTS150D6

CL 55RNL-2T-4

CL 60G147

CL 60G144

CL 55RNL-4T-4

CL 60G115

CL 70EAN600SA8T

CL 7524

CL 75RNAL-2X-6

CL 75RNAL-2V-4

CL 75RNAL-3V-4

CL 75RNL-2X-6

CL 75RNL-3V-4

CL 75RNAL-3X-6

CL 7PTHH35Q

CL 80PTHH354

CL 80PTHHA354

CL 832595

CL 839050

CL 833688

CL 832654

CL 839341

CL 839299

CL 839051

CL 839467