Bits and Sockets

AX KN-7-14M-9

UNV WRENCH 1/2 SQ DR 14MM HEX 257MM OAL
1/2 inch Drive 6 Point Metric Universal Wrench Extensions

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Maximum operating angle is30 degrees. Actual design of universal wrenches may not be exactly like pictures above.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Maximum operating angle is30 degrees. Actual design of universal wrenches may not be exactly like pictures above.

• Weight: 0.175 lb
• Clearance Depth (E): 13.5 mm
• Diameter Nose End (D): 19.1 mm

• Hex Opening: 14 mm

• Set: No
• Shank Length (A): 229 mm

AX KS-25-6

1/4 Universal Wrench Tension Sleeve

AX KS-6-10M-6

UNWRNH TENS 1/4 HEX DR 10MM HEX 174MM
1/4 inch Drive 6 Point Metric Hex Universal Wrench Extensions

• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Actual design of universal wrenches may not be exactly like pictures above.

• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Actual design of universal wrenches may not be exactly like pictures above.

• Weight: 0.265 lb
• Clearance Depth (E): 9.5 mm

• Hex Opening: 10 mm

• Nose End Diameter (D): 15.1 mm

• Set: No
• Shank Length (A): 6 in, 152 mm
• SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

AX KS-6-8M-6

1/4 Male Universal Wrench X 8mm Hex

AX KS-7-13M-9

1/4 Male Universal Wrench x 13MM Hex

AX KT-6-10M-6

UNV WRENCH 7/16 HEX DR 10MM HEX 173.8MM
7/16" Drive 6 Point Metric Hex Universal Wrench Extensions

• Actual design of universal wrenches may not be exactly like pictures above.

• Actual design of universal wrenches may not be exactly like pictures above.

• Weight: 0.404 lb
• Clearance Depth (E): 9.5 mm

• Hex Opening: 10 mm

• Nose End Diameter (D): 15.1 mm

• Set: No
• Shank Length (A): 6 in, 152 mm
• SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

AX M-10MM11

SCKT 1/4 SQ DR 10MM HEX 25.4MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.065 lb
• Diameter Drive End (C): 15.9 mm
• Diameter Nose End (B): 15.9 mm

• Hex Opening: 10 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 6.4 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 25.4 mm
• Set: No

AX M-1112

SCKT 1/4 SQ DR 3/8 HEX 1" OAL MAG
1/4" Drive - SAE - Magnetic, Standard Length, 6 Point

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Parts have a harder heat treat MX-1108-E has no lead-in chamfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Parts have a harder heat treat MX-1108-E has no lead-in chamfer

• Weight: 0.051 lb
• Diameter Drive End (C): 9/16 in
• Diameter Nose End (B): 9/16 in

• Hex Opening: 3/8 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 1/4 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1 in
• Set: No

AX M-1208

SCKT 1/4 SQ DR 1/4 HEX 1-3/4 OAL MAG
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

• Weight: 0.068 lb
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 3/8 in

• Hex Opening: 1/4 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 5/32 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-3/4 in
• Set: No

AX M-13MM43

SCKT 3/8 SQ DR 13MM HEX 38.1MM OAL MAG
3/8" Drive - Metric - Magnetic, Thin Wall, Standard Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• No ring groove.

• Weight: 0.125 lb
• Diameter Drive End (C): 19.1 mm
• Diameter Nose End (B): 19.1 mm

• Hex Opening: 13 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 8.7 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 38.1 mm
• Set: No

AX M-15-SC

HAND DVR 1/4 BIT HLDR 8-17/32" 217MM OAL
Drivers with Self-Contained Insert Bits - Hand Drivers

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency

• Weight: 0.134 kg
• Blade Projection: 4-3/8 in, 111 mm
• Description: Phillips #1, #2, #3, Slotted 4F-5R, 10F-12R, hollow handle.

• Female Hex Size (in): 1/4 in

• Magnetism: Non-Magnetic

• Overall Length: 8.5 in, 216.0 mm
• Set: No
• SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

AX M1P07

SCKT 1/4 SQ DR 7/32 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

• Weight: 0.031 lb
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 3/8 in

• Hex Opening: 7/32 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 5/32 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 7/8 in
• Set: No

AX M1P12

SCKT 1/4 SQ DR 3/8 HEX 1" OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

• Weight: 0.068 lb
• Diameter Drive End (C): 5/8 in
• Diameter Nose End (B): 5/8 in

• Hex Opening: 3/8 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 1/4 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1 in
• Set: No

AX M-3110

SCKT 3/8 SQ DR 5/16 HEX 1-1/4 OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.090 lb
• Diameter Drive End (C): 3/4 in
• Diameter Nose End (B): 1/2 in

• Hex Opening: 5/16 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 3/16 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-1/4 in
• Set: No

AX M-3118

SCKT 3/8 SQ DR 9/16 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.180 lb
• Diameter Drive End (C): 7/8 in
• Diameter Nose End (B): 7/8 in

• Hex Opening: 9/16 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 7/16 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 1-1/2 in
• Set: No

AX M3P10

SCKT 3/8 SQ DR 5/16 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - 6 Point & 6 Point Magnetic, For Self-Tapping Screws

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Sockets for predrilled holes are intermediate hardness. Sockets for self-tapping screws are maximum hardness.

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Sockets for predrilled holes are intermediate hardness. Sockets for self-tapping screws are maximum hardness.

• Weight: 0.091 lb
• Diameter Drive End (C): 3/4 in
• Diameter Nose End (B): 1/2 in

• Hex Opening: 5/16 in

• Opening Depth (D) (in): 3/16 in

• Overall Length A: 1-1/4 in
• Set: No

AX M-490-10

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 10" OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.237 lb
• Description: Magnetic

• Drive: Hex Drive
• Drive Size: 1/4 in

• Magnetism: Magnetic

• Overall Length: 10.0 in, 254.0 mm
• Set: No

AX M-490-6

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.150 lb
• Description: Magnetic

• Drive: Hex Drive
• Drive Size: 1/4 in

• Magnetism: Magnetic

• Overall Length: 6.0 in, 152.0 mm
• Set: No

AX M-497

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 3 1/16
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• 1/4" Hex Drive for 1/4" Hex Inserts
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.068 lb
• Description: Magnetic, 3/8" (9.5mm) reduced dia.

• Drive: Hex Drive
• Drive Size: 1/4 in

• Magnetism: Magnetic

• Overall Length: 3.09 in, 79.0 mm
• Set: No

AX M-498

MAG BIT HLDR 1/4 HEX DR 5/16 HEX 3-3/16
1/4" Hex Drive for 5/16" Hex Inserts - Bit Holders

• Weight: 0.142 lb
• Description: Magnetic

• Magnetism: Magnetic

• Overall Length: 3.06 in, 78.0 mm
• Set: No

AX M-5.5MM11

SCKT 1/4 SQ DR 5.5MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.030 lb
• Diameter Drive End (C): 12.7 mm
• Diameter Nose End (B): 9.5 mm

• Hex Opening: 5.5 mm
• Magnetism: Magnetic

• Opening Depth (D) (in): 3.9 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 22.2 mm
• Set: No

AX M-5118

SCKT 1/2 SQ DR 9/16 HEX 1-1/2" OAL MAG
1/2" Drive - SAE - Magnetic, Standard Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.191 lb
• Diameter Drive End (C): 15/16 in
• Diameter Nose End (B): 7/8 in

• Hex Opening: 9/16 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 7/16 in
• Opening Modifier: Single Square

• Overall Length A: 1-1/2 in
• Set: No

AX M-5124

SCKT 1/2 SQ DR 3/4 HEX 1-1/2" OAL MAG
1/2" Drive - SAE - Magnetic, Standard Length

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.292 lb
• Diameter Drive End (C): 1-1/8 in
• Diameter Nose End (B): 1-1/8 in

• Hex Opening: 3/4 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 15/32 in
• Opening Modifier: Single Square

• Overall Length A: 1-1/2 in
• Set: No

AX M6N-0810-5

NUTSET 1/4 M HEXPWRDR 5/16 HEX 5 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.119 lb

• Magnetism: Magnetic

• Overall Length: 5.0 in
• Set: No
• Size: 5/16 in

AX M6N-0814-3

NUTSET 1/4 M HEXPWRDR 7/16 HEX 3 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.100 lb

• Magnetism: Magnetic

• Overall Length: 3.0 in
• Set: No
• Size: 7/16 in