Bits and Sockets
Box Head BH-1 Head Only
STR 819072
STR 819072
Box Head Interchangeable Heads for Torque Wrenches
| Model | : | BH 1 | |
| Capacity | : | 300 lbf in | |
| Dimensions Insert | : | 1 in |
| A | : | 2.2 in | |
| B | : | 1.6 in | |
| C | : | 0.7 in | |
| D | : | 1.3 in | |
| E | : | 0.9 in |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$133.95
Ratchet Flare Nut Head 10 MM
STR 819086
STR 819086
Ratcheting Flare Nut Interchangeable Heads for Torque Wrenches
| Model | : | RFN 10mm | |
| Capacity | : | 25 Nm | |
| Dimensions Insert | : | 10 mm |
| A | : | 22.86 mm | |
| B | : | 17.78 mm | |
| C | : | 50.8 mm | |
| D | : | 7.62 mm | |
| E | : | 15.24 mm |
Product Description
- 1 7 16 Common Centerline / 36.5 mm Common Centerline
- 819119: 3 7 8 Common Centerline / 984mm Common Centerline
$396.61
Ratcheting Open End ROE-19mm Head Only - V Series
STR 819372
STR 819372
Ratcheting Open End Interchangeable Heads for Torque Wrenches
| Model | : | ROE 19 MM Head - V Series | |
| Capacity | : | 68 Nm | |
| Dimensions Insert | : | 19 mm |
| A | : | 48.26 mm | |
| B | : | 45.72 mm | |
| C | : | 10.16 mm | |
| D | : | 20.32 mm | |
| E | : | 25.4 mm |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$201.53
HD 3/16
STR 819692
STR 819692
Hex Drive Interchangeable Heads for Torque Wrenches
| Model | : | HD 3/16 | |
| Capacity | : | 235 lbf in | |
| Hex Size | : | 3/16 in |
| A | : | 1.7 in | |
| B | : | 0.5 in | |
| C | : | 1.0 in | |
| D | : | 0.8 in | |
| E | : | 0.8 in |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$121.76
Ergo Drive Sockets 3/8 X 1/2 X 1.9"
AIM A31/2EDS
AIM A31/2EDS
Ergo Drive Sockets 3/8 X 1/2 X 1.9" $62.00
Ergo -Drive Extensions 3/8 X 3/8 X 3.95"
AIM A3100EDE
AIM A3100EDE
Ergo -Drive Extensions 3/8 X 3/8 X 3.95" $80.00
Socket, Magnet Pressed, 3/8in x 12mm
AIM A312MP-2.75
AIM A312MP-2.75
Socket, Magnet Pressed, 3/8in x 12mm $52.00
Socket Magnet Tube Deep, 3/8in x 12mm
AIM A312MT-2.75
AIM A312MT-2.75
Socket Magnet Tube Deep, 3/8in x 12mm $41.00
Ergo -Drive Extensions 1/2 X 1/2 X 4.93"
AIM A4125EDE
AIM A4125EDE
Ergo -Drive Extensions 1/2 X 1/2 X 4.93" $58.00
Socket, Ergo Dr., 1/2in x 12mm x 1.9in
AIM A412EDS
AIM A412EDS
Socket, Ergo Dr., 1/2in x 12mm x 1.9in $51.00
Socket, Ergo Dr., 1/2in x 9/16in x 1.9in
AIM A49/16EDS
AIM A49/16EDS
Socket, Ergo Dr., 1/2in x 9/16in x 1.9in $50.00
Socket, 1/2in, 6-Point, Shallow, MOQ of 5
AIM AIM 4 1/250
AIM AIM 4 1/250
Socket, 1/2in, 6-Point, Shallow, MOQ of 5 Call for pricing
1/4 Sq. Drive Socket X 1/4 6 Pt. Hex
AX 1108
AX 1108
SCKT 1/4 SQ DR 1/4 HEX 7/8 OAL1/4" Drive - SAE - Standard Length, 6 Point and Double Hex
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.012 kg
- Diameter Drive End (C): 1/2 in
- Diameter Nose End (B): 3/8 in
- Hex Opening: 1/4 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 5/32 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 7/8 in
- Set: No
$10.29
1/2 Sq Drive Socket X 16mm Double Hex
AX 16MM15-D
AX 16MM15-D
SCKT 1/2 SQ DR 16MM DBL-HEX 38.1MM OAL1/2" Drive - Metric - 6 Point & Double Hex, Standard Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.194 lb
- Diameter Drive End (C): 25.4 mm
- Diameter Nose End (B): 25.4 mm
- Hex Opening: 16 mm
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 11.1 mm
- Opening Modifier: Double Hex
- Overall Length A: 38.1 mm
- Set: No
$26.10
5/16 Hex Power Drive Bit X #5/16 Pt
AX 170-5/16
AX 170-5/16
BIT 7/16HEXPWRDR 5/16" TSET 1-1/4" 32MM7/16" Hex Power Drive - Torq-Set Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
- Torq-Set is a registered trademark of the Phillips Screw Company.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
- Torq-Set is a registered trademark of the Phillips Screw Company.
- Weight: 0.037 lb
- Drive: Hex Power Drive
- Fastener Type: Torq-Set
- Overall Length: 1.25 in, 32.0 mm
- Point Size: 5/16
- Set: No
$15.28
7/16 Hex Power Drive Bit X 5/16 Pt
AX 170-5/16-ACR
AX 170-5/16-ACR
BIT 7/16HXPWDR 5/16TSET ACR-R 1-1/4" 32MM7/16" Hex Power Drive - ACR - Torq-Set Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
- Torq-Set is a registered trademark of the Phillips Screw Company.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
- Torq-Set is a registered trademark of the Phillips Screw Company.
- Weight: 0.043 lb
- Drive: Hex Power Drive
- Fastener Type: Torq-Set
- Overall Length: 1.25 in, 32.0 mm
- Point Size: 5/16
- Set: No
$19.59
1/4 Torq-Set #1/4 Hex Insert Bit
AX 212-1/4
AX 212-1/4
BIT 1/4 HEX INS 1/4 inch T-SET 1 inch 25MM OAL1/4 inch Hex Insert Bits - Torq-Set Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Torq-Set is a registered trademark of the Phillips Screw Company.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Torq-Set is a registered trademark of the Phillips Screw Company.
- Weight: 0.015 lb
- Drive: Hex Insert
- Fastener Type: Torq-Set
- Overall Length: 1.0 in, 25.0 mm
- Point Size: 1/4
- Set: No
- SKU Group Note: Torq-Set and ACR are registered trademarks of the Phillips Screw Company.
$9.60
1/4 Hex Insert X #00 MorTorq Bit X 1
AX 440-MT-00
AX 440-MT-00
BIT 1/4 HEX INS #00 MORTORQ 1" 25MM OALMorTorq Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Other drive sizes/types and point sizes can be quoted. Contact your Apex Distributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw Company.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Other drive sizes/types and point sizes can be quoted. Contact your Apex Distributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw Company.
- Weight: 0.010 lb
- Drive: Hex Insert
- Drive Size: 1/4 in - Hex Insert
- Fastener Type: MorTorq
- MorTorq Size: 00
- Overall Length: 1.0 in, 25.0 mm
- Set: No
$16.22
Bit 5/16 Hex Insert 40IP TXPLS 1-1/4in, 32mm
AX 480-40IPX
AX 480-40IPX
BIT 5/16 HEX INS 40IP TXPLS 1-1/4" 32MM5/16" Hex Insert Bits - Torx Plus Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.
- Weight: 0.025 lb
- Drive: Hex Insert
- Drive Size: 40IP
- Fastener Type: Torx Plus
- Measurement Across Lobes: .260 in
- Overall Length: 1.25 in, 32.0 mm
- Set: No
- SKU Group Note: Torx, Torx Plus and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.
$7.96
1/4 Hex Drive Holder X 1/4 Hex X 2-1/8
AX 490
AX 490
BIT HLDR 1/4 HEX DR 1/4 HEX 2 1/8 OAL1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders
- 1/4" Hex Drive for 1/4" Hex Inserts
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- 1/4" Hex Drive for 1/4" Hex Inserts
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.042 lb
- Drive: Hex
- Drive Size: 1/4 in
- Magnetism: Non-Magnetic
- Overall Length: 2.125 in, 54.0 mm
- Set: No
$8.58
BIT-HOLDER 1/4 MALE HEX DRV PO
AX 490-10
AX 490-10
BIT HLDR 1/4 HEX DR 1/4 HEX 10 OAL1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders
- 1/4" Hex Drive for 1/4" Hex Inserts
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- 1/4" Hex Drive for 1/4" Hex Inserts
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.211 lb
- Drive: Hex Drive
- Drive Size: 1/4 in
- Magnetism: Non-Magnetic
- Overall Length: 10.0 in, 254.0 mm
- Set: No
$41.06
BIT-HOLDER 1/4 MALE HEX DRV PO
AX 490-6
AX 490-6
BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders
- 1/4" Hex Drive for 1/4" Hex Inserts
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- 1/4" Hex Drive for 1/4" Hex Inserts
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.123 lb
- Drive: Hex Drive
- Drive Size: 1/4 in
- Magnetism: Non-Magnetic
- Overall Length: 6.0 in, 152.0 mm
- Set: No
$28.05
1/4 Hex Drive X #1 Phillips X 3-1/2
AX 491-B-ACR1X
AX 491-B-ACR1X
1/4 Hex Drive X #1 Phillips X 3-1/2 $4.94
Refine