Airpower | Bits and Sockets

1/2 Hi-Torque Sq Insert Bit X#10 Recess

AX HTS-10

BIT 1/2 SQ SRV DR #10 HTRQ 1-5/8 inch 41MM
1/2 inch Drive Hi-Torque Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.356 lb
Blade Width: 1.25 in
Body Diameter (D): 1-1/4 in

Fastener Type: Hi-Torque

Overall Length: 1.625 in
Recess: 10
Set: No
SKU Group Note: Hi-Torque-Rudy Vaughn, Licensor

$154.70

3/8 Hi-Torque Sq Insert Bit X #5 Recess

AX HTS-5

BIT 3/8 SQ SRV DR #5 HI-TORQ 1-1/4" 32MM
3/8in Drive Hi-Torque Insert Bits

Weight: 0.091 lb
Blade Width: 0.629 in
Body Diameter (D): 3/4 in

Fastener Type: Hi-Torque

Overall Length: 1.25 in
Recess: 5
Set: No

$55.08

Unv Wrench, 3/8in Sq. Dr. 3/8 Hex, 6-7/8in OAL, 12/Min

AX KA-43-6

UNV WRENCH 3/8 SQ DR 3/8 HEX 6-7/8" OAL
3/8in Drive 6 Point Metric IronBand Hex Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.411 lb
Clearance Depth (E): 7/16 in
Diameter Nose End (D): 17/32 in

Hex Opening: 3/8 in

Set: No
Shank Length (A): 6 in

$90.44

Unv Wrench, 3/8in Sq. Dr. 1/2 Hex, 6-59/64in OAL, 12/Min

AX KA-45-6

UNV WRNCH 3/8 SQ DR 1/2 HEX 6-59/64" OAL
3/8in Drive 6 Point Metric IronBand Hex Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.416 lb
Clearance Depth (E): 1/2 in
Diameter Nose End (D): 11/16 in

Hex Opening: 1/2 in

Set: No
Shank Length (A): 6 in

$103.62

UNV WRNCH STANDARD 1/4 MALE HE

AX KC-105-6

UNV WRNCH 1/4 HEX DR 9/16 HEX 7-1/32 OAL
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.019 lb
Clearance Depth (E): 9/16 in

Hex Opening: 9/16 in

Nose End Diameter (D): 13/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$82.54

1/4 Sq Drive Universal Wrench X 1/4 Hex

AX KC-25-6

UNV WRENCH 1/4 HEX DR 1/4 HEX 6-51/64
1/4 inch Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.205 lb
Clearance Depth (E): 3/8 in

Hex Opening: 1/4 in

Nose End Diameter (D): 3/8 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$70.13

1/4 Sq Drive Universal Wrench X 5/16 Hex

AX KC-26-6

UNV WRNCH 1/4 HEX DR 5/16 HEX 6-51/64OAL
1/4 inch Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.203 lb
Clearance Depth (E): 3/8 in

Hex Opening: 5/16 in

Nose End Diameter (D): 7/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$71.49

UNV WRNCH STANDARD 1/4 MALE HE

AX KC-27-6

UNV WRENCH 1/4 HEX DR 11/32 HEX 6-51/64
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.204 lb
Clearance Depth (E): 3/8 in

Hex Opening: 11/32 in

Nose End Diameter (D): 1/2 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$89.93

1/4 Sq Drive Universal Wrench X 7/16 Hex

AX KC-29-6

UNV WRENCH 1/4 HEX DR 7/16 HEX 6-59/64
1/4 inch Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.209 lb
Clearance Depth (E): 1/2 in

Hex Opening: 7/16 in

Nose End Diameter (D): 5/8 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$76.08

Universal Wrench 1/4 Hex Dr. 8MM Hex

AX KC-6-8M-6

UNV WRENCH 1/4 HEX DR 8MMHEX 172.5MM OAL
1/4" Drive 6 Point Metric Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.035 lb
Clearance Depth (E): 7.9 mm

Hex Opening: 8 mm

Nose End Diameter (D): 11.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$124.53

Universal Wrench

AX KDW-C-104-12

UNV WRENCH 3/8 SQ DR 1/2 HEX 13-1/8" OAL
3/8in Drive 6 Point SAE IronBand Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.199 lb
Clearance Depth (E): 9/16 in
Diameter Nose End (D): 3/4 in

Hex Opening: 1/2 in

Overall Length A: 12 in
Set: No
Shank Length (A): 12 in

$212.16

1/2indr x 1-1/4in Hex Univ.

AX KH-540-6-B-2.75

UNV WRENCH 1/2 SQ DR 1-1/4 HEX 6 inch OAL
1/2 inch Drive 6 Point SAE Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is30 degrees. Actual design of universal wrenches may not be exactly like pictures above.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is30 degrees. Actual design of universal wrenches may not be exactly like pictures above.

Weight: 1.847 lb
Clearance Depth (E): 1-29/32 in
Diameter Nose End (D): 1-3/4 in

Hex Opening: 1-1/4 in

Set: No
Shank Length (A): 6 in

$302.60

Universal Wrench 1/2 In Sq Drive X

AX KHW-C-105-6

UNV WRENCH 1/2 SQ DR 9/16 HEX 7-3/8in OAL
1/2in Drive SAE IronBand Universal Extension Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is 30 degree . Actual design of universal wrenches may not be exactly like pictures above.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is 30 degree . Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.625 lb
Clearance Depth (E): 9/16 in
Diameter Nose End (D): 13/16 in

Hex Opening: 9/16 in

Set: No
Shank Length (A): 6 in

$222.36

1/2 Sq Drive Universal Wrench X 14mm Hex

AX KN-7-14M-9

UNV WRENCH 1/2 SQ DR 14MM HEX 257MM OAL
1/2 inch Drive 6 Point Metric Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is30 degrees. Actual design of universal wrenches may not be exactly like pictures above.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is30 degrees. Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.175 lb
Clearance Depth (E): 13.5 mm
Diameter Nose End (D): 19.1 mm

Hex Opening: 14 mm

Set: No
Shank Length (A): 229 mm

$170.68

1/2 Sq Drive Universal Wrench, 1/2 Sq, 7-17/32in OAL

AX KNM-50-6

UNV WRENCH 1/2 SQ DR 1/2 SQ 7-17/32 inch OAL
1/2 inch Drive 1/2 inch Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees. Standard lengths are 3inch , 6 inch , 9inch and 12 inch (76, 152, 229 and 305mm).

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees. Standard lengths are 3inch , 6 inch , 9inch and 12 inch (76, 152, 229 and 305mm).

Weight: 0.710 lb

Female Square (in): 1/2 in

Largest Diameter: 1 in, 25 mm
Male Square Drive (in): 1/2 in

Set: No

$190.06

1/4 Universal Wrench Tension Sleeve

AX KS-25-6

1/4 Universal Wrench Tension Sleeve

$99.71

Universal Wrench, Tension Type 1/4 Hex Dr. 5/16 Hex 6-51/64

AX KS-26-6

UN WRNH TENS 1/4 HEX DR 5/16 HEX 6-51/64
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.223 lb
Clearance Depth (E): 3/8 in

Hex Opening: 5/16 in

Nose End Diameter (D): 7/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$88.57

1/4 Male Universal Wrench X 10mm Hex

AX KS-6-10M-6

UNWRNH TENS 1/4 HEX DR 10MM HEX 174MM
1/4 inch Drive 6 Point Metric Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.265 lb
Clearance Depth (E): 9.5 mm

Hex Opening: 10 mm

Nose End Diameter (D): 15.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$91.04

1/4 Male Universal Wrench X 8mm Hex

AX KS-6-8M-6

1/4 Male Universal Wrench X 8mm Hex

$118.75

1/4 Male Universal Wrench x 13MM Hex

AX KS-7-13M-9

1/4 Male Universal Wrench x 13MM Hex

$155.81

UNV WRNCH STANDARD 7/16 MALE H

AX KT-6-10M-6

UNV WRENCH 7/16 HEX DR 10MM HEX 173.8MM
7/16" Drive 6 Point Metric Hex Universal Wrench Extensions

Actual design of universal wrenches may not be exactly like pictures above.

Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.404 lb
Clearance Depth (E): 9.5 mm

Hex Opening: 10 mm

Nose End Diameter (D): 15.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$113.31

1/4 Hex Slotted Bit X 5F-6R X 3-3/4

AX L-320X

BIT 1/4 PWRDRW/SL 5F-6R SLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.066 lb
Body Diameter: .193 in, 4.9 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 5F-6R
Set: No

$16.44

1/4 Sq Drive Socket X 10mm Hex X 25.4mm

AX M-10MM11

SCKT 1/4 SQ DR 10MM HEX 25.4MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.065 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 25.4 mm
Set: No

$21.97

1/4 Square Drive Socket, 10MM Hex 44.5MM OAL Magnetic

AX M-10MM21

SCKT 1/4 SQ DR 10MM HEX 44.5MM OAL MAG
1/4" Drive - Metric - Magnetic, Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.110 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 44.4 mm
Set: No

$33.66

1/4 Sq. Drive Socket X 3/8 6 Pt Hex (M)

AX M-1112

SCKT 1/4 SQ DR 3/8 HEX 1" OAL MAG
1/4" Drive - SAE - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Weight: 0.051 lb
Diameter Drive End (C): 9/16 in
Diameter Nose End (B): 9/16 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$20.29

Bits and Sockets

AX HTS-10

AX HTS-5

AX KA-43-6

AX KA-45-6

AX KC-105-6

AX KC-25-6

AX KC-26-6

AX KC-27-6

AX KC-29-6

AX KC-6-8M-6

AX KDW-C-104-12

AX KH-540-6-B-2.75

AX KHW-C-105-6

AX KN-7-14M-9

AX KNM-50-6

AX KS-25-6

AX KS-26-6

AX KS-6-10M-6

AX KS-6-8M-6

AX KS-7-13M-9

AX KT-6-10M-6

AX L-320X

AX M-10MM11

AX M-10MM21

AX M-1112

Payment options