Airpower | Bits and Sockets

1/4 Hex Slotted Bit X 4F-5R X 3-1/2

AX 327-1X

BIT 1/4 HEX PWRDR 4F-5R SLOT 3-1/2" 89MM
1/4" Hex Power Drive - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.028 lb
Blade Width/Body Diameter: 0.187 in, 4.75 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Overall Length: 3.5 in, 89.0 mm
Screw Size: 4F-5R
Set: No

$8.36

1/4 Hex Slotted Bit X 6F-8R X 3-1/2

AX 327-3X

BIT 1/4 HEX PWRDR 6F-8R SLOT 3-1/2" 89MM
1/4" Hex Power Drive - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.043 lb
Blade Width/Body Diameter: 0.250 in, 6.35 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Overall Length: 3.5 in, 89.0 mm
Screw Size: 6F-8R
Set: No

$8.36

1/4 Hex Slotted Bit X 8F-10R X 3-1/2

AX 327-4X

BIT 1/4HEXPWRDR 8F-10R SLT 3-1/2" 89MMOAL
1/4" Hex Power Drive - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.053 lb
Blade Width/Body Diameter: 0.275 in, 6.99 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Overall Length: 3.5 in, 89.0 mm
Screw Size: 8F-10R
Set: No

$8.36

Socket, 3/8 SQ DR, 5/16 HEX, 3-1/2in OAL, 12/Minimum

AX 3310

Socket, 3/8 SQ DR, 5/16 HEX, 3-1/2in OAL, 12/Minimum

$28.99

Socket, 3/8 SQ DR, 5/16 DBL-HEX, 3-1/2in OAL, 12/Minimum

AX 3310-D

SCKT 3/8 SQ DR 5/16 DBL-HEX 3-1/2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.325 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in

Opening Depth (D) (in): 3/16 in

Overall Length A: 3-1/2 in
Set: No

$44.88

3/8 Sq. Drive Socket X 3/4in Hex, 3-1/2in OAL, 12 minimum

AX 3324

SCKT 3/8" SQ DR 3/4" HEX 3-1/2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.473 lb
Diameter Drive End (C): 1-1/16 in
Diameter Nose End (B): 1-1/16 in

Hex Opening: 3/4 in

Opening Depth (D) (in): 15/32 in

Overall Length A: 3-1/2 in
Set: No

$77.69

3/8 Sq. Drive Socket X 7/16 6 Pt Hex

AX 3414

SCKT 3/8" SQ DR 7/16" HEX 1-1/2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.041 kg
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 5/8 in

Hex Opening: 7/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 9/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$18.33

3/8 Sq. Drive Socket X 1/2 6 Pt Hex

AX 3416

SCKT 3/8" SQ DR 1/2" HEX 1-1/2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.105 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 3/4 in

Hex Opening: 1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$14.91

3/8 Sq. Drive Socket X 9/16 6 Pt Hex

AX 3418

SCKT 3/8" SQ DR 9/16" HEX 1-1/2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.107 lb
Diameter Drive End (C): 13/16 in
Diameter Nose End (B): 25/32 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$24.22

3/8 Sq. Drive Socket X 9/16 6 Pt Hex

AX 3518

SCKT 3/8 SQ DR 9/16 HEX 2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Thin Wall, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.145 lb
Diameter Drive End (C): 13/16 in
Diameter Nose End (B): 25/32 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in
Set: No

$29.16

Impct Sckt., 3/8 Fem. Sq. Dr., 6 Pt. 1/4

AX 3608

SCKT 3/8" SQ DR 1/4" SQUARE 1-1/2" OAL
3/8" Drive - SAE - Single Square & Double Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.116 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 1/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in
Set: No

$23.18

Sckt 1/2 Fmale Sq Drive 36MM FM

AX 36MM15

SCKT 1/2 SQ DR 36MM HEX 47.6MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.999 lb
Diameter Drive End (C): 50.8 mm
Diameter Nose End (B): 50.8 mm

Hex Opening: 36 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 23.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 47.6 mm
Set: No

$76.59

1/4 Hex Drv Insert # 1 Phillips

AX 440-125X

BIT 1/4 HEX INS #1 PH 2-1/2" 64MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.034 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.5 in, 64.0 mm
Point Size: 1
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.52

Bit 1/4 Hex Ins, 20IP TXPLS, 1in 25mm QAL

AX 440-20IPRX

BIT 1/4 HEX INS 20IPR TXPLS 1" 25MM OAL
1/4" Hex Insert Bits - Tamper Resistant - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.015 lb

Drive: Hex Insert
Drive Size: 20IPR
Fastener Type: Torx Plus

Measurement Across Lobes: .151 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.

$13.84

1/4 Hex Insert X #2 Phillips X 1-1/2

AX 440-215X

BIT 1/4 HEX INS #2 PH 1-1/2" 38MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.019 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.5 in, 38.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.30

1/4 Hex Insert X #2 Phillips X 2 w/ACR

AX 440-22-ACR2X

BIT 1/4 HEX INS #2 PH ACR 2" 51MM OAL
1/4" Hex Insert Bits - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Weight: 0.026 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.0 in, 51.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$3.21

1/4 Hex Insert Bit X #2 Phillips X 2

AX 440-22X

BIT 1/4 HEX INS #2 PH 2" 51MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.027 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.0 in, 51.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.35

1/4 Hex Insert Bit X #2 Phillips X 3

AX 440-23X

BIT 1/4 HEX INS #2 PH 3" 76MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.041 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 3.0 in, 76.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.84

1/4 Hex Insert X #2 Phillips X 5-1/2

AX 440-255X

BIT 1/4 HEX INS #2 PH 5 1/2" 140MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.078 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 5.5 in, 140.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$5.06

1/4 Hex Insert Bit X #2 Phillips X 1

AX 440-27X

BIT 1/4 HEX INS #27 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb
Description: For shallow screw recesses

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.37

1/4 Phillips #2 Hex Insert Bits w/ ACR

AX 440-2-ACR2-RI

BIT 1/4 HEX INS #2 PH ACR-R 1" 25MM OAL
1/4" Hex Insert Bits - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.73

BIT 1/4 HEX INS #2 PH 1in 25MM OAL

AX 440-2I

BIT 1/4 HEX INS #2 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.45

1/4 Hex Insert X #3 Phillips X 2-1/2

AX 440-325X

BIT 1/4 HEX INS #3 PH 2-1/2" 64MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.035 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.5 in, 64.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.58

1/4 Hex Insert X #3 Phillips X 2

AX 440-32X

BIT 1/4 HEX INS #3 PH 2" 51MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.027 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.0 in, 51.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.61

1/4 Hex Insert X #3 Phillips X 3

AX 440-33X

BIT 1/4 HEX INS #3 PH 3" 76MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.042 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 3.0 in, 76.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.75

Bits and Sockets

AX 327-1X

AX 327-3X

AX 327-4X

AX 3310

AX 3310-D

AX 3324

AX 3414

AX 3416

AX 3418

AX 3518

AX 3608

AX 36MM15

AX 440-125X

AX 440-20IPRX

AX 440-215X

AX 440-22-ACR2X

AX 440-22X

AX 440-23X

AX 440-255X

AX 440-27X

AX 440-2-ACR2-RI

AX 440-2I

AX 440-325X

AX 440-32X

AX 440-33X

Payment options