Airpower | Bits and Sockets

Socket Magnet Tube Deep, 3/8in x 12mm

AIM A312MT-2.75

Socket Magnet Tube Deep, 3/8in x 12mm

$50.00

Bit Phillips Double Ended 2-1/4 x 2 x 8 in

AIM A3W2-8

Bit Phillips Double Ended 2-1/4 x 2 x 8 in

$4.34

Ergo -Drive Extensions 1/2 X 1/2 X 4.93"

AIM A4125EDE

Ergo -Drive Extensions 1/2 X 1/2 X 4.93"

$70.00

Socket, Ergo Dr., 1/2in x 12mm x 1.9in

AIM A412EDS

Socket, Ergo Dr., 1/2in x 12mm x 1.9in

$60.00

Socket, Ergo Dr., 1/2in x 9/16in x 1.9in

AIM A49/16EDS

Socket, Ergo Dr., 1/2in x 9/16in x 1.9in

$60.00

Socket Ergo Drive, 3/4in x 5/16in x 2.55in

AIM A615/16EDS

Socket Ergo Drive, 3/4in x 5/16in x 2.55in

$160.00

Ergo-Drive Quick Change Chucks 3/8 X 1/4 X 2.35"

AIM ADC-3SEDSQ

Ergo-Drive Quick Change Chucks 3/8 X 1/4 X 2.35"

$80.00

JUMBO 4-SIDE 2W FLAT 9 1/2 IN.

AJ 276

JUMBO 4-SIDE 2W FLAT 9 1/2 IN.

$0.00

13/16X12 OCRS 1-1/2W FLAT

AJ 325-12

13/16X12 OCRS 1-1/2W FLAT

$0.00

Pull Pin

AJ 654-12

Pull Pin

$0.00

1/4 Sq. Drive Socket X 10mm Double Hex

AX 10MM11-D

SCKT 1/4 SQ DR 10MM DBL-HEX 25.4MM OAL
1/4" Drive - Metric - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.052 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: Double Hex

Overall Length A: 25.4 mm
Set: No

$15.70

3/8 Sq. Drive Socket X 10mm 12 Pt. Hex

AX 10MM13-D

SCKT 3/8 SQ DR 10MM DBL-HEX 31.8MM OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.092 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: Double Hex

Overall Length A: 31.7 mm
Set: No

$17.80

1/2 Sq. Drive Socket X 10mm Double Hex

AX 10MM15-D

SCKT 1/2 SQ DR 10MM DBL-HEX 38.1MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.159 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 16.7 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: Double Hex

Overall Length A: 38.1 mm
Set: No

$20.66

1/4 Sq. Drive Socket X 10mm 6 Pt. Hex

AX 10MM21

SCKT 1/4 SQ DR 10MM HEX 44.5MM OAL
1/4" Drive - Metric - Long Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.353 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 44.4 mm
Set: No

$15.87

3/8 Sq. Drive Socket X 10mm 6 Pt. Hex

AX 10MM23

SCKT 3/8 SQ DR 10MM HEX 50.8MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.168 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$16.87

1/2 Sq. Drive Socket X 10mm 6 Pt. Hex

AX 10MM25

SCKT 1/2 SQ DR 10MM HEX 57.2MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.283 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 16.7 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 57.1 mm
Set: No

$23.85

3/8 Sq. Drive Socket X 10mm 6 Pt. Hex

AX 10MM33

SCKT 3/8 SQ DR 10MM HEX 88.9MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.309 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 88.9 mm
Set: No

$27.71

10mm Wall Socket, 12 point

AX 10MM43-D

SCKT 3/8 SQ DR 10MM DBL-HEX 31.8MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Thin Wall, Standard Length

No ring groove.

No ring groove.

Weight: 0.074 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 15.1 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: Double Hex

Overall Length A: 31.7 mm
Set: No

$27.20

1/2 Sq. Drive Socket X 10mm 6 Pt. Hex

AX 10MM45

SCKT 1/2 SQ DR 10MM HEX 38.1MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.128 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$27.03

1/4 Sq. Drive Socket X 1/4 6 Pt. Hex

AX 1108

SCKT 1/4 SQ DR 1/4 HEX 7/8 OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 kg
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 3/8 in

Hex Opening: 1/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$9.24

1/4 Sq. Drive Socket X 9/32 6 Pt Hex

AX 1109

SCKT 1/4 SQ DR 9/32 HEX 1" OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.015 kg
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 7/16 in

Hex Opening: 9/32 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$15.22

1/4 Sq. Drive Socket X 5/16 6 Pt Hex

AX 1110

SCKT 1/4 SQ DR 5/16 HEX 1" OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.032 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$8.86

1/4 Sq. Drive Socket X 7/16 6 Pt Hex

AX 1114

SCKT 1/4 SQ DR 7/16 HEX 1" OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.076 lb
Diameter Drive End (C): 5/8 in
Diameter Nose End (B): 5/8 in

Hex Opening: 7/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 9/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$14.06

1/4 Sq. Drive Socket X 1/2 6 Pt Hex

AX 1116

SCKT 1/4 SQ DR 1/2 HEX 1" OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.001 kg
Diameter Drive End (C): 11/16 in
Diameter Nose End (B): 11/16 in

Hex Opening: 1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$15.09

1/4 Sq. Drive Socket X 1/2 Double Hex

AX 1116-D

SCKT 1/4 SQ DR 1/2 DBL-HEX 1" OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.074 lb
Diameter Drive End (C): 11/16 in
Diameter Nose End (B): 11/16 in

Hex Opening: 1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: Double Hex

Overall Length A: 1 in
Set: No

$20.22

Bits and Sockets

AIM A312MT-2.75

AIM A3W2-8

AIM A4125EDE

AIM A412EDS

AIM A49/16EDS

AIM A615/16EDS

AIM ADC-3SEDSQ

AJ 276

AJ 325-12

AJ 654-12

AX 10MM11-D

AX 10MM13-D

AX 10MM15-D

AX 10MM21

AX 10MM23

AX 10MM25

AX 10MM33

AX 10MM43-D

AX 10MM45

AX 1108

AX 1109

AX 1110

AX 1114

AX 1116

AX 1116-D

Payment options