Bits and Sockets

STR 819735

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819737

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819756

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819764

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819771

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 853032

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 853752

Smal Ratchet Body with Larger Drive Size, inches

Product Description

• 1 7 16 Common Centerline / 36.5 mm Common Centerline

STR 853873

Slim Profile Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

AIM A312EDS

AIM A314EDS

AIM A3150EDE

AIM A3W2-8

AIM A413EDS

AIM A417-4

AIM A615/16EDS

AJ 45200

AJ 60035

AJ 60670

AJ 63060

AX 1107

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.001 kg
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 3/8 in

• Hex Opening: 7/32 in
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 5/32 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 7/8 in
• Set: No

AX 14MM55

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.316 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 20.6 mm

• Hex Opening: 14 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 82.5 mm
• Set: No

AX 170-1/4-ACR

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
• Torq-Set is a registered trademark of the Phillips Screw Company.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
• Torq-Set is a registered trademark of the Phillips Screw Company.

• Weight: 0.042 lb

• Drive: Hex Power Drive
• Fastener Type: Torq-Set

• Overall Length: 1.25 in, 32.0 mm
• Point Size: 1/4
• Set: No

AX 185-10X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.012 lb
• Cap Screw Size: 8

• Drive: Hex Insert
• Fastener Type: Socket Head

• Hex Size: 9/64 in

• Overall Length: 1.0 in, 25.0 mm
• Set: No

AX 185-9X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.010 lb
• Cap Screw Size: 6

• Drive: Hex Insert
• Fastener Type: Socket Head

• Hex Size: 7/64 in

• Overall Length: 1.0 in, 25.0 mm
• Set: No

AX 20995455