Airpower | Bits and Sockets

1/4 Pozidriv Hex Insert X #2 Pt X 1

AX 440-2-PZDX

BIT 1/4 HEX INS #2 POZIDRIV 1" 25MM OAL
1/4" Hex Insert Bits - Pozidriv Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pozidriv is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pozidriv is a registered trademark of the Phillips Screw Company.

Weight: 0.011 lb

Drive: Hex Insert
Fastener Type: Pozidriv

Long Description: 1/4", Hex Insert Bits

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$1.44

1/4 Hex Insert Bit X T-25-H Torx Hex(TR)

AX 440-TX-25-H

BIT 1/4 HEX INS T25 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-25-H
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$8.56

AX 480-TX-25X

BIT 5/16 HEX INS T-25 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

AX 480-TX-27X

BIT 5/16 INSERT T27 TORX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.32

Bit, 1/4 Hex Pwrdr No.1 PH ACR 1-15/16in, 49mm, 25min

AX 491-ACR1-DX

BIT 1/4 HEX PWRDR #1 PH ACR 1-15/16" 49MM
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.017 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Screw Size: 1
Set: No

$4.11

1/4 Hex Drive X #1 Phillips X 3-1/2

AX 491-BX

BIT 1/4 HEX PWR DR #1 PH 3-1/2" 89MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.029 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 3.5 in, 89.0 mm
Point Size: 1
Set: No

$3.75

Bit, 1/4 Hex Pwrdr No.2 PH ACR 3-1/2in, 89mm, 25min

AX 492-B-ACR2-DX

BIT 1/4 HEX PWRDR #2 PH ACR 3-1/2" 89MM
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.042 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 3.5 in, 89.0 mm
Point Size: 2
Set: No

$4.30

1/4 Pozidriv Hex Drive X #2 X 3-1/2

AX 492-B-PZDX

BIT 1/4HEX PWR DR #2 POZI 3-1/2" 89MM OAL
1/4" Hex Power Drive - Pozidriv Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Pozidriv is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Pozidriv is a registered trademark of the Phillips Screw Company.

Weight: 0.042 lb

Drive: Hex Power Drive
Fastener Type: Pozidriv

Overall Length: 3.5 in, 89.0 mm
Point Size: 2
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$5.10

1/4 Hex Dr X T-40 Torx Hex X 3-1/2 Torx Hex Drive

AX 49-B-TX-40

BIT 1/4 HEX PWRDR T40 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.062 lb

Drive: Hex Power Drive
Drive Size: T-40
Fastener Type: Torx

Measurement Across Lobes: .260 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

Bit 1/4 Hex Drv. Power No. 10. T

AX 49-TX-10-H

BIT 1/4 HEX PWR DR T-10 TX 1-15/16" 49MM
1/4" Hex Power Drive - Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.016 lb

Drive: Hex Power Drive
Drive Size: T-10-H
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$25.93

1/4 Hex Drive X T-25 Torx Hex X 1-15/16

AX 49-TX-25

BIT 1/4 HEX PWR DR T-25 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.016 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Long Description: 1/4", Hex Power Drive

Measurement Across Lobes: .173 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

AX 49-TX-25-W

BIT 1/4 HEX PWR DR T-25 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torxalign - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.020 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.06

1/4 Hex Drive X T-30 Torx Hex X 1-15/16

AX 49-TX-30

1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Drive: Hex Power Drive
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.93 in, 49.0 mm
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/2 Sq. Drive Socket X 1-5/16 Hex

AX 5142

SCKT 1/2" SQ DR 1-5/16" HEX 1-3/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.838 lb
Diameter Drive End (C): 1-7/8 in
Diameter Nose End (B): 1-7/8 in

Hex Opening: 1-5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$77.52

AX 5230

SCKT 1/2" SQ DR 15/16" HEX 2-1/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.540 lb
Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-3/8 in

Hex Opening: 15/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in
Set: No

$43.35

1/2 Sq. Drive Socket X 3/4 6 Pt Hex

AX 5324

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 3-1/4 in

$39.02

Socket 1/2in Sq. Dr. 3/8in Hex 1-1/2in OAL

AX 5412

1/2" Drive - SAE - 6 Point and Double Hex, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 19/32 in

Hex Opening: 3/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in

$43.35

Bit, 12-24 THD DR, #2 PH 1.187in OAL

AX 552I

BIT 12-24 THD DR #2 PH 1-3/16" 30MM OAL
12-24 Screw Shank Drive - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.015 lb

Drive: Screw Shank Drive
Fastener Type: Phillips

Overall Length: 1.18 in, 30.0 mm
Point Size: 2
Set: No

$8.49

13/16 Double Square x 1/2in, Sq. Dr. Socket, 12/Minimum

AX 5826-D

SCKT 1/2 SQ DR 13/16 DBL SQ 3-1/2" OAL
1/2" Drive - SAE - Single Square & Double Square, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 1.221 lb
Diameter Drive End (C): 1-1/2 in
Diameter Nose End (B): 1-1/2 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 17/32 in
Opening Modifier: Double Square

Overall Length A: 3-1/2 in
Set: No

Call for pricing

1/4 6 Pt Hex Drive Nutsetter X 1/4

AX 6B-0808

NUTSET 1/4 MALE HEX DR 1/4 HEX 3-1/4 OAL
1/4" Drive 6 Point Hex Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.060 lb
Depth of Clearance (A): 1-3/8 in

Magnetism: Non-Magnetic

Overall Length: 3.25 in
Set: No
Size: 1/4 in
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

$28.05

1/4 6 Pt Hex Drive Nutsetter X 9/16

AX 6B-0818

NUTSET 1/4 MALE HEXDR 9/16 HEX 3-1/4 OAL
1/4" Drive 6 Point Hex Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.117 lb
Depth of Clearance (A): 1-3/8 in

Magnetism: Non-Magnetic

Overall Length: 3.25 in
Set: No
Size: 9/16 in
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

$44.97

3/8 Sq. Drive Socket X 6mm 6 Pt. Hex

AX 6MM13

SCKT 3/8 SQ DR 6MM HEX 31.8MM OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.090 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 11.1 mm

Hex Opening: 6 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.7 mm
Set: No

$13.84

1/4 6 Pt Hex Nutsetter X 7/16 X 2

AX 6N-0814-2

NUTSET 1/4 MALE HEX DR 7/16 HEX 2" OAL
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.058 lb

Magnetism: Non-Magnetic

Overall Length: 2.0 in
Set: No
Size: 7/16 in

$29.24

SCKT 3/4" SQ DR 1-5/8" HEX, 2-1/4" OAL, 12/Minimum

AX 7152PT

SCKT 3/4" SQ DR 1-5/8" HEX, 2-1/4" OAL, 12/Minimum

Call for pricing

3/4" FML SQ DRV, 1-7/8" HEX, SCKT, 12/Minimum

AX 7160PT

3/4" FML SQ DRV, 1-7/8" HEX, SCKT, 12/Minimum

Call for pricing

Bits and Sockets

AX 440-2-PZDX

AX 440-TX-25-H

AX 480-TX-25X

AX 480-TX-27X

AX 491-ACR1-DX

AX 491-BX

AX 492-B-ACR2-DX

AX 492-B-PZDX

AX 49-B-TX-40

AX 49-TX-10-H

AX 49-TX-25

AX 49-TX-25-W

AX 49-TX-30

AX 5142

AX 5230

AX 5324

AX 5412

AX 552I

AX 5826-D

AX 6B-0808

AX 6B-0818

AX 6MM13

AX 6N-0814-2

AX 7152PT

AX 7160PT

Payment options