Search
Nutrunner
Nutsetter, R/A, Wireless
CL 47BAYPB65P4L
CL 47BAYPB65P4L
CLECO WIRELESS NUTSETTER ANGLELightweight Right angle tool designed for safety critical applications
Weight (lbs): 4.56 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications with a CM/CMK of 2.0 at +/- 7% accuracy
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Ergonomic - Reduce operator fatigue with lighter, ergonomic tools
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 4.56 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$30,930.90
Cleco Wireless Crowfoot Nutsetter
CL 47BCYSB30C1
CL 47BCYSB30C1
CLECO WIRELESS CROWFOOT NUTSETTERCrowfoot tool designed for hard to reach, safety critical applications
Weight (lbs): 6.1 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 6.1 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$27,545.70
Nutsteer, 50 Series Inline - 123NM
CL 50ESN125KD4
CL 50ESN125KD4
NUTSTR, 50 SERIES INLINE - 123NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 5.29 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 5.29 lb
$14,464.45
Nutsetter, 50 Series Inline Tool - 28NM
CL 50ESN28FD3
CL 50ESN28FD3
NUTSTR, 50 SERIES INLINE - 28NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 2.98 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 2.98 lb
$12,981.15
Nutsetter, 50 Series Inline - 43NM
CL 50ESN43GD3
CL 50ESN43GD3
NUTSTR, 50 SERIES INLINE - 43NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 3.64 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 3.64 lb
$13,422.50
Nutsetter, 50 Series Inline Tool - 65NM
CL 50ESN65HD4
CL 50ESN65HD4
NUTSTR, 50 SERIES INLINE - 66NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 4.19 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 4.19 lb
Call for pricing
Neo Tek NutSetter, Tube Nut, 30Nm
CL 50ETN30T3
CL 50ETN30T3
NUTSTR, TUBE NUT, 30Nm- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 4.23 lb
$16,612.05
Inline Nutrunner,1/2 In Sq Dr
CL 55RNAL-3-4
CL 55RNAL-3-4
NUTRUNNER25 - 67 ftls / 34 - 91Nm - Use with Torque Reaction
Tool Configuration: Inline
Weight (lbs): 6.5 lb
General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769
- Engineered for performance, durability, mounting versatility, and serviceability
- Durable Clecomatic shut off clutch delivers best in class torque repeatability
- Heavy duty motor, gearing and clutch for long life
- Torque reaction bar supplied with tool
Tool Configuration: Inline
Weight (lbs): 6.5 lb
General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769
$4,877.60
Angle Nut Runner
CL 55RNAL-3T-4
CL 55RNAL-3T-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$5,259.80
Nut Runner, Right Angle, 1/2 In Sq Dr, 26-64 Ft Lbs, 280 RPM
CL 55RNAL-4T-4
CL 55RNAL-4T-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$5,259.80
Nutrunner
CL 55RNL-4T-4
CL 55RNL-4T-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series.
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$4,231.50
Nutrunner, Stall, Lever, 41 Ft Lbs Max, 490 Rpm
CL 55RNL-7T-4
CL 55RNL-7T-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 6.1 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series.
Tool Configuration: Right Angle
Weight (lbs): 6.1 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$4,231.50
4000 NM INLINE TOOL
CL 70EAN4000UA12MT
CL 70EAN4000UA12MT
NUTSTR, 70 SERIES AH - 4000NMDurability and unsurpassed RPM for high torque applications up to 4000 Nm
Weight (lbs): 41.6 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Flexible high torque solutions
- 60% speed increase over current legacy series tools
Weight (lbs): 41.6 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
$36,650.25
NEOTEK DC TOOL 92-443 FT/LBS 190 RPM
CL 70EAN600SA8T
CL 70EAN600SA8T
NUTSTR, 70 SERIES AH - 600NMDurability and unsurpassed RPM for high torque applications up to 4000 Nm
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Flexible high torque solutions
- 60% speed increase over current legacy series tools
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
Call for pricing
850NM INLINE TOOL
CL 70ESN850SD8
CL 70ESN850SD8
NUTSTR, 70 SERIES INLINE - 850NMDurability and unsurpassed RPM for high torque applications up to 4000 Nm.
Weight (lbs): 16.76 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 16.76 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
$19,792.50
Nutsetter, 70 Series Inline Floating, 245 NM
CL 70ESR2453ZB
CL 70ESR2453ZB
Nutsetter, 70 Series Inline Floating, 245 NM
Call for pricing
NutRunner, Angle, 1/2" Square Drive
CL 75RNAL-2V-4
CL 75RNAL-2V-4
NutRunner, Angle, 1/2" Square Drive
$8,599.50
3/4in Nutrunner, 150-305 Ft-Lb, 80 Rpm
CL 75RNAL-2X-6
CL 75RNAL-2X-6
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
NutRunner
CL 75RNAL-3V-4
CL 75RNAL-3V-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,599.50
Nutrunner 3/4in
CL 75RNAL-3X-6
CL 75RNAL-3X-6
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
Nut Setter
CL 88RSATP-5CQ
CL 88RSATP-5CQ
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 3/8" Square or 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$2,930.20
BUILT-IN NUTS 3BTSE-3B300A-3M2B-3ZB
CL 947656A0
CL 947656A0
BUILT-IN NUTS 3BTSE-3B300A-3M2B-3ZB
$19,115.00
BUILT-IN NUTS 4BTSE-4B660A-4M3B-4ZA
CL 947668A6
CL 947668A6
BUILT-IN NUTS 4BTSE-4B660A-4M3B-4ZA
$23,200.00
Payment options
