Hydraullic Units

EP RR-3014

EP RR-308

EP RR314K2

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP RR506

RR-Series Cylinders are the ideal choice whenever you need to retract the plunger quickly with precise control. These popular rams are rugged enough to withstand high-cycle and demanding job site uses - making them incredibly effective within both the construction and manufacturing industries. RR Cylinders are available in long stroke models to Lift or push a load a greater distance, which will save you time and minimize or eliminate the need for temporary cribbing.

The collar thread, plunger thread, base mounting holes, removable saddle and optional accessories make these some of the most versatile cylinders available. Optional accessories include flat, grooved, and tilt saddles on models up to 75-ton. These are secured to the plunger for use both horizontally and upside down.

The RR range is extensive, with capacities ranging from 10 to 500 imperial tons (101 - 5108 kN), and maximum plunger strokes from 2.25" to 48" (57 - 1219 mm). Each RR Cylinder available for sale is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RR
• Stroke Inches: 6.13
• Stroke MM: 156
• SubTypes: General Purpose Cylinder

• Collar threads and plunger threads for easy fixturing
• Baked enamel finish for increased corrosion resistance
• Removable hardened saddles protect plunger during lifting and pressing
• Built-in safety valve prevents accidental over-pressurization
• Plunger wiper reduces contamination, extending cylinder life
• CR400 coupler included on all models

• Spare Part(s): RR5013K1, L345045, G586900SR-7000, RR5013KV
• Accessories: CATS100

EP RR7513

RR-Series Cylinders are the ideal choice whenever you need to retract the plunger quickly with precise control. These popular rams are rugged enough to withstand high-cycle and demanding job site uses - making them incredibly effective within both the construction and manufacturing industries. RR Cylinders are available in long stroke models to Lift or push a load a greater distance, which will save you time and minimize or eliminate the need for temporary cribbing.

The collar thread, plunger thread, base mounting holes, removable saddle and optional accessories make these some of the most versatile cylinders available. Optional accessories include flat, grooved, and tilt saddles on models up to 75-ton. These are secured to the plunger for use both horizontally and upside down.

The RR range is extensive, with capacities ranging from 10 to 500 imperial tons (101 - 5108 kN), and maximum plunger strokes from 2.25" to 48" (57 - 1219 mm). Each RR Cylinder available for sale is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RR
• Stroke Inches: 13.13
• Stroke MM: 333
• SubTypes: General Purpose Cylinder

• Collar threads and plunger threads for easy fixturing
• Baked enamel finish for increased corrosion resistance
• Removable hardened saddles protect plunger during lifting and pressing
• Built-in safety valve prevents accidental over-pressurization
• Plunger wiper reduces contamination, extending cylinder life
• CR400 coupler included on all models

• Spare Part(s): RR756K, L345045, G586900SR-7000
• Accessories: CATS100

EP RRH-1001

EP RRH1003

RRH-Series Hollow Plunger Hydraulic Cylinders are ideal for tensioning, testing, pulling, and lifting applications. The hollow bore, base threaded holes and collar thread allow attachments that enable the cylinder to deliver both pull and push forces.

RRH double-acting center-hole hydraulic cylinders feature two connection ports to provide hydraulic flow to both advance and retract the plunger. This provides a more controlled retraction than single-acting cylinders.

Cylinders in the RRH-Series are constructed from high-alloy steel and finished with a baked enamel exterior coating. Collar threads and base holes for easy fixturing are provided as standard.

Enerpac has designed and manufactured 10,000 psi (700 bar) high-pressure hydraulic cylinders for many decades. We use only the highest quality materials to ensure they can withstand the most demanding applications. All RRH cylinders meet the safety standards required for high-pressure hydraulic tools.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RRH
• Stroke Inches: 3
• Stroke MM: 76
• SubTypes: Hollow Plunger Cylinder

• Relief valves prevent damage in case of over-pressurization
• Baked enamel finish for increased corrosion resistance
• Collar threads enable easy fixturing
• Double-acting operation for fast retraction
• Nickel-plated, floating center tube increases product life
• Hollow plunger allows for both pull and push forces
• CR-400 couplers and dust caps included on all models
• Plunger wiper reduces contamination, extending cylinder life

• Accessories: HP10016

EP RRH-1508

EP RSL19000FSK

• Type: Service Kit

• SubTypes: Front Cap and Seal Kit

EP RSM-100

EP RSM-1000

EP RSM-300

EP RSM-50

EP RSM-750

EP RTE30X

• Type: Torque Wrench Accessory

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: RTEX
• SubTypes: Reaction Tube Extension

• Full torque rated
• Increases tool fit in restricted access areas

EP S1500DK

• Type: Service Kit

• SubTypes: Drive Unit Rebuild Kit

EP S1500GK

• Type: Service Kit

• SubTypes: Guard Kit

EP S1500RK

• Type: Service Kit

• SubTypes: Ratchet Kit

EP S1500SDRK

• Type: Service Kit

• SubTypes: Square Drive Retainer

EP S1500SK

• Type: Service Kit

• SubTypes: Seal Kit

EP S1500SMK

• Type: Service Kit

• SubTypes: Manifold Kit

EP S3000PX

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: S-PX
• SubTypes: Square Drive Torque Wrench

• Compact, high-strength uni-body construction provides a small operating radius without sacrificing endurance
• 35° rotation angle and rapid return stroke for fast operation
• Tough manifold design with added safety feature for enhanced operator safety
• 360° click-on reaction arm with quick release lever provides easier handling, even when wearing gloves
• Includes robust handle which mounts on both sides of tool for extra maneuverability
• Push button square drive release for quickly reversing the square drive for tightening or loosening
• Fitted with enhanced tilt and swivel TSP300 manifold for horizontal and vertical maneuverability, with greater durability
• Constant torque output provides accuracy of +/-3% across full stroke
• Optional Angle-of-Turn Indicator provides measurement of rotation

• Set Includes: SWH6A, TSP300, SD30100
• Accessories: BUS01, BUS02, BUS03, BUS04, BUS05, BUS06, BUS07, BUS08, BUS09, BUS10, MCS7500C, SWH6S, AOT30, RTE30X, SRS301X, SRS302X, SRS303X

EP S6000PX

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: S-PX
• SubTypes: Square Drive Torque Wrench

• Compact, high-strength uni-body construction provides a small operating radius without sacrificing endurance
• 35° rotation angle and rapid return stroke for fast operation
• Tough manifold design with added safety feature for enhanced operator safety
• 360° click-on reaction arm with quick release lever provides easier handling, even when wearing gloves
• Includes robust handle which mounts on both sides of tool for extra maneuverability
• Push button square drive release for quickly reversing the square drive for tightening or loosening
• Fitted with enhanced tilt and swivel TSP300 manifold for horizontal and vertical maneuverability, with greater durability
• Constant torque output provides accuracy of +/-3% across full stroke
• Optional Angle-of-Turn Indicator provides measurement of rotation

• Set Includes: SWH10A, TSP300, SD60108
• Accessories: BUS02, BUS03, BUS04, BUS05, BUS06, BUS07, BUS08, BUS09, BUS10, BUS11, BUS12, MCS7500C, SWH10S, AOT60, RTE60X, SRS601X, SRS602X, SRS603X

EP SB1

• Type: Spreader Accessory

• Product Group: Flange Maintenance Tools
• Product Line: Industrial Tools, Bolting Tools
• SubTypes: Safety Block

EP SC10HTB

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks, Pumps
• Product Line: Industrial Tools
• Series: SCTB
• Stroke Inches: .44 - 6.13
• Stroke MM: 11 - 156
• SubTypes: Toolbox Set - MRO

• Capacity Imperial Tons: 10
• Capacity KN: 89,0

• Designed to enhance job-site performance
• Provides a convenient and portable solution for all your lifting, pushing or pulling requirements up to 10 ton
• Industrial strength container keeps tools organized and secure
• Complete with base plate for extra stability.

• Set Includes: P392, GA45GC, HC7206C, HF100, RC106, JBI10, RCS101, RSM100, RCH123, WR5