Hydraullic Units

EP RC603A

Simplex RC Series Hollow Plunger Hydraulic Cylinders offer the versatility needed to take on a wide range of applications. The hollow plunger design allows bars or rods to be pulled through the inside bore to enable pulling and pushing applications - ideal for tensioning cables, bolts, and pulling sleeves or bearings.

Inside the cylinder is a high-strength return spring for plunger retraction and stop rings for blow out protection. The cylinder exterior is finished with an enamel coating to extend cylinder life, and a wiper protects the inner cylinder assembly from dirt, moisture, and other contaminants.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: RC - Simplex
• Stroke Inches: 3
• Stroke MM: 76.2
• SubTypes: Center Hole Cylinder

• Capacity Imperial Tons: 60
• Capacity KN: 533,8

• Induction hardened piston rod for added strength eliminates the need for a saddle.
• Collar threads for easy fixing of components.
• Hollow plunger design allows for both push & pull forces.
• Large center hole for greater flexibility.
• Heavy duty spring delivers fast and full retraction
• Stop rings prevent piston blow-out
• Wiper protects inner cylinder from dirt.
• Meets ANSI/ASME B30.1 Safety Standards
• Load tested under 125% of the nominal capacity
• For working pressures up to 10,000 psi (700 bar)

EP RC-756

EP RCH1003

RCH-Series Hollow Plunger Cylinders offer versatility in testing, maintenance, and tensioning applications. The hollow plunger design allows for push, pull or lifting applications.

Enerpac cylinders are built to withstand tough conditions and demanding applications. These RCH cylinders have a baked enamel finish to resist corrosion. The center hole design has base holes and collar threads for easy fixturing. For models over 20 tons, the RCH series has nickel-plated floating center tube to reduce side load damage and increase the product life.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RCH
• Stroke inch: 3
• Stroke MM: 76
• SubTypes: Hollow Plunger Cylinder

• Hollow plunger design allows for both pull and push forces
• Single-acting spring return
• Nickel-plated, floating center tube on models over 20 tons increases product life
• Baked enamel finish for increased corrosion resistance
• Collar threads for easy fixturing
• Features CR400 Coupler

• Set Includes: CR400
• Spare Part(s): RCH1003K
• Accessories: HP10016

EP RCH202

RCH-Series Hollow Plunger Cylinders offer versatility in testing, maintenance, and tensioning applications. The hollow plunger design allows for push, pull or lifting applications.

Enerpac cylinders are built to withstand tough conditions and demanding applications. These RCH cylinders have a baked enamel finish to resist corrosion. The center hole design has base holes and collar threads for easy fixturing. For models over 20 tons, the RCH series has nickel-plated floating center tube to reduce side load damage and increase the product life.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RCH
• Stroke Inches: 2
• Stroke MM: 49
• SubTypes: Hollow Plunger Cylinder

• Hollow plunger design allows for both pull and push forces
• Single-acting spring return
• Nickel-plated, floating center tube on models over 20 tons increases product life
• Baked enamel finish for increased corrosion resistance
• Collar threads for easy fixturing
• Features CR400 Coupler

• Set Includes: CR400
• Spare Part(s): RCH202K, CF707110, CB894045, RCH202KV1
• Accessories: HP202

EP RCH302

RCH-Series Hollow Plunger Cylinders offer versatility in testing, maintenance, and tensioning applications. The hollow plunger design allows for push, pull or lifting applications.

Enerpac cylinders are built to withstand tough conditions and demanding applications. These RCH cylinders have a baked enamel finish to resist corrosion. The center hole design has base holes and collar threads for easy fixturing. For models over 20 tons, the RCH series has nickel-plated floating center tube to reduce side load damage and increase the product life.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RCH
• Stroke Inches: 2.5
• Stroke MM: 64
• SubTypes: Hollow Plunger Cylinder

• Hollow plunger design allows for both pull and push forces
• Single-acting spring return
• Nickel-plated, floating center tube on models over 20 tons increases product life
• Baked enamel finish for increased corrosion resistance
• Collar threads for easy fixturing
• Features CR400 Coupler

• Set Includes: CR400
• Spare Part(s): RCH302K2, CH259110, CF698045, RWH302KV
• Accessories: HP3015

EP RCH-306

EP RCH-603

EP RCH603K

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP RCS-1002

EP RD2510

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000
• Min Bar: 35

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools, Work Holding Tools
• Series: RD
• Stroke Inches: 10.25
• Stroke MM: 260
• SubTypes: General Purpose Cylinder

• Designed for long life, the best choice for production applications
• Unique mounting configurations simplify fixturing
• Baked enamel finish for increased corrosion resistance
• Double-acting operation develops force in both directions, providing maximum versatility
• Plunger wiper reduces contamination, extending cylinder life

• Accessories: AD191, AD192, AD193, AD153

EP RD-256

EP RD46K2

• Type: Service Kit

• SubTypes: Repair Part

EP RD91

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000
• Min Bar: 35

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools, Work Holding Tools
• Series: RD
• Stroke Inches: 1.13
• Stroke MM: 28
• SubTypes: General Purpose Cylinder

• Designed for long life, the best choice for production applications
• Unique mounting configurations simplify fixturing
• Baked enamel finish for increased corrosion resistance
• Double-acting operation develops force in both directions, providing maximum versatility
• Plunger wiper reduces contamination, extending cylinder life

• Accessories: AD171, AD172, AD173, AD151

EP RD93

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000
• Min Bar: 35

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools, Work Holding Tools
• Series: RD
• Stroke Inches: 3.13
• Stroke MM: 79
• SubTypes: General Purpose Cylinder

• Designed for long life, the best choice for production applications
• Unique mounting configurations simplify fixturing
• Baked enamel finish for increased corrosion resistance
• Double-acting operation develops force in both directions, providing maximum versatility
• Plunger wiper reduces contamination, extending cylinder life

• Accessories: AD171, AD172, AD173, AD151

EP RD-96

EP REB-5

EP REP-5

EP RJ85A

• Multiple-tooth pawls for strength & safety.
• Large base ensures a firm foundation.
• Drop-forged, alloy steel, heat-treated components.
• Plated springs to resist corrosion.
• Double-lever sockets for jacking in close quarters.
• Our Jack design specifications meet or exceed ANSI / ASME B30.1 Safety Standards
• Carrying handles make the positioning and transporting of the 10 (44,5), 15 (89) and 20 (133,4) ton (kN) ratchet jacks simple.

• Type: Jack

• Product Line: Mechanical Tools
• Series: RJ
• Stroke Inches: 10
• Stroke MM: 254
• SubTypes: Ratchet Jacks

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• Accessories: SLB36

EP RJ86A

• Multiple-tooth pawls for strength & safety.
• Large base ensures a firm foundation.
• Drop-forged, alloy steel, heat-treated components.
• Plated springs to resist corrosion.
• Double-lever sockets for jacking in close quarters.
• Our Jack design specifications meet or exceed ANSI / ASME B30.1 Safety Standards
• Carrying handles make the positioning and transporting of the 10 (44,5), 15 (89) and 20 (133,4) ton (kN) ratchet jacks simple.

• Type: Jack

• Product Line: Mechanical Tools
• Series: RJ
• Stroke Inches: 13
• Stroke MM: 330.2
• SubTypes: Ratchet Jacks

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• Accessories: SLB36

EP RJA1538

• Multiple-tooth pawls for strength & safety.
• Large base ensures a firm foundation.
• Drop-forged, alloy steel, heat-treated components.
• Plated springs to resist corrosion.
• Double-lever sockets for jacking in close quarters.
• Our Jack design specifications meet or exceed ANSI / ASME B30.1 Safety Standards.
• The RJA1538 pole jack is designed for pole pulling applications. Chain and I-Beam are ordered separately.
• Carrying handles make the positioning and transporting of the 10 (44,5), 15 (89) and 20 (133,4) ton (kN) ratchet jacks simple.

• Type: Jack

• Product Line: Mechanical Tools
• Series: RJ
• Stroke Inches: 21.25
• Stroke MM: 539.8
• SubTypes: Ratchet Jacks

• Capacity Imperial Tons: 8
• Capacity KN: 71,2

• Accessories: SLB70

EP RLL1502

• Load-return - for weighing, lifting and positioning applications.
• Lock nut tested to 150% of rated load.
• Lock nut provides safe mechanical load holding for an extended period of time.
• Red band warns operator to end of stroke, over-flow port prevents over-stroke.
• Built-in tilt saddle to improve side-load resistance.
• Body, lock nut and saddle feature black nitride coating to improve corrosion and wear resistance.
• Low-Profile for use in confined areas.

• Type: Hydraulic Cylinders
• Max PSI: 10150

• Product Line: Hydraulic Tools
• Series: RLL
• Stroke Inches: 1.77
• Stroke MM: 45
• SubTypes: High Tonnage Lock Nut Cylinder

• Capacity Imperial Tons: 158
• Capacity KN: 1429
• Capacity Metric Tons: 143

EP RLP19312

This low-profile hexagon cassette is for use with compatible RSL-Series modular drive units. The low-profile design with an optimum nose radius gives you the access needed for hassle-free bolting in tight spaces.

For heavy use and enduring durability, RLP-Series Cassettes are constructed from robust steel and are easily fixed to the RSL Drive Unit using four Allen Key Bolts.

The wide range of interchangeable hexagon cassette sizes provides the versatility to complete a wide range of bolting applications. For exceptionally tight spaces consider the RLP Slimline Stepped Width Cassettes which can also be used with the same drive unit.

Constant torque output provides accuracy of plus/minus 3% across full stroke.

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: RLP
• SubTypes: Cassette - Imperial or Metric

• Accessories: ERT19024

EP RLS302

• Compact low-profile design.
• HD spring for fast retraction.
• Grooved plunger to stabilize the load.
• Stop ring for piston blow-out protection.
• Rod wiper protects inner cylinder from dirt.
• Plated piston to resist scoring & corrosion.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: RLS
• Stroke Inches: 2.44
• Stroke MM: 62
• SubTypes: Low Height Cylinder

• Capacity Imperial Tons: 30
• Capacity KN: 266,9

EP RR-1006

EP RR-1012