Search
CLECO S10555
CLECO S10555 branded products
3/8 Sq Drive External Torx Socket X E-10
AX TX-3410
AX TX-3410
SCKT 3/8 SQ DR E10 TORX 1-1/4 OAL3/8" Drive - Torx - For External Torx Screws, Thin Wall, Magnetic & Non-Magnetic
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Some Torx sockets have a DIN (pin and o-ring) groove.
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Some Torx sockets have a DIN (pin and o-ring) groove.
- Weight: 0.052 lb
- Diameter Drive End (C): 5/8 in, 16 mm
- Diameter Nose End (B): 1/2 in, 13 mm
- Driver Size: E-10
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1-1/4 in, 32 mm
- Set: No
$22.53
U-Guard Socket 1/2 Sq Dr x 15 MM Hex
AX UG-15MM25
AX UG-15MM25
SCKT CVRD 1/2 SQ DR 15MM HEX 57.9MM OAL1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.161 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/2 in
- Fastener End Sex: F
- Fastener End Size: 15 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 15MM25
- Opening Modifier: 6 Point Hex
- Set: No
$92.99
Socket 1/2 SQ DR, E10 Tor X 1-1/2 OAL
AX TX-5410
AX TX-5410
SCKT 1/2 SQ DR E10 TORX 1-1/2" OAL1/2" Drive - Torx - For External Torx Screws, Thin Wall
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.115 lb
- Diameter Drive End (C): 7/8 in, 22 mm
- Diameter Nose End (B): 1/2 in, 13 mm
- Driver Size: E-10
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1-1/2 in, 38 mm
- Set: No
$35.19
U-Gurard Socket, 3/8 Fm Sq Dr. x 7/16 Fm
AX UG-3214
AX UG-3214
U-Gurard Socket, 3/8 Fm Sq Dr. x 7/16 Fm
$74.97
1/2 Sq Drv 11/16 FM Hex U-Guard CVR, 12/Min
AX UG-5222
AX UG-5222
1/2 Sq Drv 11/16 FM Hex U-Guard CVR, 12/Min
$115.94
Adapter, Covered, Sq Dr 1/2, 3/8 Sq, 8 Oal
AX UG-EX-377-8
AX UG-EX-377-8
Adapter, Covered, Sq Dr 1/2, 3/8 Sq, 8 Oal
$144.16
Socket, U-Guard, 3/8 SQ DR 12MM HEX 51MM OAL MB
AX UG-MB-12MM23
AX UG-MB-12MM23
SCKT CVRD 3/8 SQ DR 12MM HEX 51MM OAL MB3/8" Drive Metric u-GUARD Magnetic Covered Sockets
- Weight: 0.140 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 3/8 in
- Fastener End Sex: F
- Fastener End Size: 12 mm
- Fastener End Type: Hex
- Magnetism: Magnetic
- Metal Socket Number: MB-12MM23
- Opening Modifier: 6 Point HEx
- Set: No
$96.56
Mag Bit Holder, U-Guard Covered 1/2 SQ DR 5/16 HEX
AX UG-M-855
AX UG-M-855
Mag Bit Holder, U-Guard Covered 1/2 SQ DR 5/16 HEX
$128.52
EXT CVRD 1/2 SQ DR 1/2 SQ 3" OAL
AX UG-EX-508-3
AX UG-EX-508-3
EXT CVRD 1/2 SQ DR 1/2 SQ 3" OAL
$115.77
44 pc Ratchet wrench set in Foam Tray
GW 86528
GW 86528
44 pc Ratchet wrench set in Foam Tray
$573.33
83 Pc. 1/4, 3/8, 1/2 90 tooth SAE/Metric Mechanics socket set with EVA foam tray
GW 86529
GW 86529
83 Pc. 1/4, 3/8, 1/2 90 tooth SAE/Metric Mechanics socket set with EVA foam tray
$0.00
Ra Snd/Grd, Fe, 4.5K, Gov
DC 12L2762-80
DC 12L2762-80
RA SND/GRD,FE,4.5K,GOV,5/8-11E850 - 11,000 RPM 0.9 hp (0.67 kW)
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 3.97 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches
- Aluminum 10L and Composite 12L housing options
- High output motor for demanding sanding applications
- Heavy duty low profile head for superior durability
- Tool not supplied with backing pad as shown
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 3.97 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches
$1,208.30
RA SND/GRD, ERGO, RE, 14. 5, 4" TP27
DC 12L2778-84
DC 12L2778-84
RA SND/GRD, ERGO, RE, 14. 5, 4" TP27
$1,354.50
Router Guide
DC 14-2400
DC 14-2400
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
DRILL ANGLE, RE, 5K, 1/4-28I
DC 15LN281-62
DC 15LN281-62
DRILL ANGLE,RE,5K,1/4-28I0.9hp / 0.67kW 470-5600 rpm Ideal for Restricted Access Applications
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
- Wide array of speeds, head designs, and spindle threads for all applications
- High efficiency motor and geartrain
- -62 1/4in -28 Internal thread standard
- Other terminations available: -61 10-32 Internal Thread -63 Threaded Collet -64 5/16in -24 Internal Thread
- Lock off safety lever standard
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
$1,560.90
3/8 Sq Drive Socket X 13mm Hex X 3.5 in OAL Mag
AX MB-13MM33
AX MB-13MM33
SCKT 3/8 SQ DR 13MM HEX 88.9MM OAL MB3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Weight: 0.330 lb
- Diameter Drive End (C): 20.6 mm
- Diameter Nose End (B): 20.6 mm
- Hex Opening: 13 mm
- Magnetism: Magnetic
- Opening Depth (D) (in): 8.7 mm
- Opening Modifier: 6 Point Hex
- Overall Length A: 88.9 mm
- Set: No
$73.53
Bit, 12-24 THD DR, #2 PH 1.187in OAL
AX 552I
AX 552I
BIT 12-24 THD DR #2 PH 1-3/16" 30MM OAL12-24 Screw Shank Drive - Phillips Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.015 lb
- Drive: Screw Shank Drive
- Fastener Type: Phillips
- Overall Length: 1.18 in, 30.0 mm
- Point Size: 2
- Set: No
$8.49
Dotco, Grinder, Ergo, FE, 20000 Rpm, 1/4in Collet
CL 12L2001-01LH
CL 12L2001-01LH
Dotco, Grinder, Ergo, FE, 20K, 1/4in Col, LH
$614.90
Dotco, .83 Multi. Ext, Re, 18K, 1/4in E300
CL 12L2674-1A
CL 12L2674-1A
Dotco, .83 Multi. Ext, Re, 18K, 1/4in E300
$1,191.10
Right Angle Sander/Grinder, 20000Rpm
DC 10LF281-36
DC 10LF281-36
RA SNDR/GRD,RE,20K,1/4" COLLET12,000 - 20,000 RPM 0.4 hp (0.29 kW)
Exhaust: Rear
Type Housing: Aluminum
Weight (lbs): 1.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm
- Composite housing
- Wide array of speeds; front and rear exhaust models available
- Ergonomic and balanced design minimized operator fatigue
- OH Option Supplied with 4' Overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
Exhaust: Rear
Type Housing: Aluminum
Weight (lbs): 1.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm
$735.30
3/4 Sq. Drive Socket X 1-1/2 6 Pt Hex
AX 7348
AX 7348
3/4" Drive - SAE - 6 Point & Double Hex, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Diameter Drive End (C): 2-1/8 in
- Diameter Nose End (B): 2-1/4 in
- Hex Opening: 1-1/2 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 1 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 4 in
$117.98
1/4 Hex Dr X T-40 Torx Hex X 3-1/2 Torx Hex Drive
AX 49-B-TX-40
AX 49-B-TX-40
BIT 1/4 HEX PWRDR T40 TX 3-1/2" 89MM OAL1/4" Hex Power Drive - Torx Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
- Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
- Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
- Weight: 0.062 lb
- Drive: Hex Power Drive
- Drive Size: T-40
- Fastener Type: Torx
- Measurement Across Lobes: .260 in
- Overall Length: 3.5 in, 89.0 mm
- Set: No
- SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.
$9.76
Adapter. Hex to 1/2" Sq. Drive
AX A-516
AX A-516
ADAPT 1/2 MALE HEX DR 1/2 SQ 1-5/32" OALSocket & Ratchet Wrench Adapters, SAE
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.072 lb
- Male Hex Size: 1/2 in
- Male Square Drive (in): 1/2 in
- Overall Length: 1.09 in
- Set: No
$27.88
Floating Adapter, Guided Size 2, 3/4
AX S308450
AX S308450
Floating Adapter, Guided Size 2, 3/4
$1,345.13
M12X1.0 THREADED DRIVE, 3/8" FEMALE HEX SOCKET, 1.26"OVERALL LENGTH WRENCH FLATS ON NOSE END
AX-CUSTOM SOCKET
AX-CUSTOM SOCKET
M12X1.0 THREADED DRIVE, 3/8" FEMALE HEX SOCKET, 1.26"OVERALL LENGTH WRENCH FLATS ON NOSE END
Call for pricing
ZERO SMOG EL KIT1 1X0F 5 1XALFA 120V B
WF ZEROSMOGELKIT1N
WF ZEROSMOGELKIT1N
ZERO SMOG EL KIT1 1X0F 5 1XALFA 120V B
$0.00
Drill, 3/8, Non-Reversible, 2600 Rpm Q
MP MP1457-51
MP MP1457-51
Drill, 3/8, Non-Reversible, 2600 Rpm Q
$485.04
3/8 Sq. Drive Impact, 10-55 ft.-lbs.
MP MP2265B
MP MP2265B
3/8 Sq. Drive Impact, 10-55 ft.-lbs.
$490.62
Payment options
