Spray Guns - Manual

GG 289017

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289017 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289020

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055

Graco 289020 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289250

FINEX GUN, 2, HVLP, PRESS, 1.8

Graco 289250 Finex Air Spray Pressure Feed Gun, HVLP, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

• Aircaps optimized for high quality spray performance
• Lightweight, ergonomic gun
• Lightest trigger pull in its category

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.071
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (kg): 0.37
• Gun Weight (lb): 0.8

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG XTR522

XTR+ GUN, XTR5+, OVL HND, 4FNG, XHDRAC

Graco XTR522 XTR5+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

IW 3035

IW 4915

SATA 1061936

SATA 204198

SATA 210765

BB 2101-3100-0

BB 2101-6260-0/52-699

BB 2465-18CN-11S0

BB 2465-18LV-23SS

BB 98-1067

DD JGA-510-57D

DD MBC-510-704E

GG 234237

GUN, SPRAY, UNDERCOAT

Graco 234237 4-Finger Silver Gun with Tip Guard/Tip - 4,500 psi (310 bar) x 3/8 NPT(f) Inlet

• Up to 18,000 psi (1,242 bar)
• Must order 155570 adapter and 239663 straight swivel to accommodate gun to 1/4 in (mbe) hose.

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Body Material: Aluminum

• Compatible Material: Undercoating, Rustproofing
• Component A Inlet Size (cm): 0.635

• Component A Inlet Size (in): 1/4
• Component A Inlet Size (mm): 6.35
• Component A Inlet Thread Type: NPSM

• Fluid Orifice Size (cm): 0.043
• Fluid Orifice Size (in): 0.017
• Fluid Orifice Size (mm): 0.43

• For Use With: Undercoating and Rustproofing

• Gun Activation: Manual
• Gun Type: Airless Gun

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 50
• Maximum Fluid Temperature (°F): 120

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 50
• Maximum Fluid Temperature (°F): 120

GG 245924

GUN, SPRAY, TEXTURE

Graco 245924 Texture Gun and Hopper

Double-handle and lightweight design provides maximum support and control for ceiling, wall and floor applications. Sprays acoustics, drywall mud, waterproofing materials, pool-deck sealant, stucco and most gravity-fed materials.

• Lightweight Design - Weighs up to 35% less than comparable models to reduce operator fatigue
• Angled, 1-1/2 Gallon (5.7 L) Capacity for longer spraying periods before refills
• Handles on Both Sides - Rotates 180° for maximum control when spraying ceilings, walls and floors
• Durable metal trigger with conveniently located trigger adjustment allows fine tuning of fluid output for a precise and consistent finish
• Exclusive Hopper Clamp - No tools needed to attach hopper to gun

• Model: TexSpray

• Applicator Type: Manual

• Compatible Material: Water-Based Material

• Feed Type: Pressure Feed

• For Use With: Texture Sprayer

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Airless Gun
• Gun Weight (g): 990
• Gun Weight (kg): 0.99
• Gun Weight (lb): 2.1875
• Gun Weight (oz): 35

• Maximum Air Inlet Pressure (bar): 9
• Maximum Air Inlet Pressure (kPa): 900
• Maximum Air Inlet Pressure (MPa): 0.9
• Maximum Air Inlet Pressure (psi): 130.5
• Maximum Air Pressure (bar): 9

• Maximum Air Pressure (kPa): 900
• Maximum Air Pressure (MPa): 0.9
• Maximum Air Pressure (psi): 125

• Maximum Fluid Pressure (bar): 4.9
• Maximum Fluid Pressure (kPa): 490
• Maximum Fluid Pressure (MPa): 0.49
• Maximum Fluid Pressure (psi): 70

• Maximum Fluid Pressure (bar): 4.9
• Maximum Fluid Pressure (kPa): 490
• Maximum Fluid Pressure (MPa): 0.49
• Maximum Fluid Pressure (psi): 70

• Overall Height (cm): 60.96
• Overall Height (in): 24
• Overall Height (mm): 609.6
• Overall Length (cm): 45.085
• Overall Length (in): 17.75
• Overall Length (mm): 450.85
• Overall Width (cm): 27.94
• Overall Width (in): 11
• Overall Width (mm): 279.4

• Product Type: Spray Gun

GG 26B511

PERFORMAA GUN, AA, 5000, GF, SWIVEL

Graco 26B511 PerformAA 5000 Air Assist Gun with General Finishing air cap and fluid swivel

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

• High quality 5000 psi air assist spray gun
• General finishing air cap for a wide range of materials
• Includes a low profile fluid swivel
• Clicking fan pattern adjustment knob for accurate adjustment

• Model: PerformAA 50

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
• Compatible Spray Tip: AXM, AXF

• Feed Type: Pressure Feed

• Fluid Adjustment Knob: Clicking
• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air-Assisted Gun
• Gun Weight (g): 453
• Gun Weight (kg): 0.45
• Gun Weight (lb): 1
• Gun Weight (oz): 16
• Gun Weight with Tip and Guard (g): 490
• Gun Weight with Tip and Guard (oz): 17.4
• Gun Weight without Tip and Guard (g): 460

• Gun Weight without Tip and Guard (oz): 16.2

• Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 110

• Overall Height (cm): 20.8
• Overall Height (in): 8.2
• Overall Height (mm): 208
• Overall Length (cm): 17.25
• Overall Length (in): 6.8
• Overall Length (mm): 173

• Product Type: Spray Gun

GG 288429

FTX GUN, 2FINGER, RAC X 515, PKG

Graco 288429 Contractor FTx Airless Spray Gun, 2 Finger Trigger, RAC X 515 SwitchTip

The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 2-finger trigger and a RAC X 515 SwitchTip and Guard.

• Exclusive FlexSeal Needle
  • Totally enclosed patented design eliminates needle's exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
  • Fluid pushes on seal to quickly shut off needle and reduce spitting
  • Spring is located outside fluid path for better flow
  • Helps eliminate pack out and slow needle shut-off
• Reduced Gun Spitting
  • Repositioned seat is closer to the tip, eliminating 60% of the dead space
  • Less paint left between needle and tip results in less spitting
• Ergonomic Design
  • Form-fitted handle provides maximum control and comfort
  • Detachable trigger guard swings clear of gun handle for easy filter access
  • Lightweight design reduces operator fatigue
• Modular Needle Design
  • Simply remove the trigger cross pin and unthread front housing to change out needle
• EasyGlide Swivel
  • Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
• Easy Out Gun Filter
  • Filters from the inside out to prevent filter from collapsing
  • Interchangeable with all Contractor series guns

• Model: Contractor FTx
• Series: Airless Spray Gun

• Component A Inlet Size (in): 1/4
• Component A Inlet Thread Type: NPSM
• Component Type: Single Component

• Fluid Orifice Size (cm): 0.318
• Fluid Orifice Size (in): 0.125
• Fluid Orifice Size (mm): 3.17

• Gun Activation: Manual
• Gun Type: Airless Gun
• Gun Weight (oz): 23.8

• Includes: RAC X 515 SwitchTip, RAC X HandTite Guard

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Product Type: Spray Gun

GG 288431

FTX GUN, RAC 5(PKGD)

Graco 288431 Contractor FTx Airless Spray Gun, 4 Finger Trigger, RAC 5 515 SwitchTip

The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 4-finger trigger and a RAC 5 515 SwitchTip and Guard.

• Exclusive FlexSeal Needle
  • Totally enclosed patented design eliminates needle's exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
  • Fluid pushes on seal to quickly shut off needle and reduce spitting
  • Spring is located outside fluid path for better flow
  • Helps eliminate pack out and slow needle shut-off
• Reduced Gun Spitting
  • Repositioned seat is closer to the tip, eliminating 60% of the dead space
  • Less paint left between needle and tip results in less spitting
• Ergonomic Design
  • Form-fitted handle provides maximum control and comfort
  • Detachable trigger guard swings clear of gun handle for easy filter access
  • Lightweight design reduces operator fatigue
• Modular Needle Design
  • Simply remove the trigger cross pin and unthread front housing to change out needle
• EasyGlide Swivel
  • Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
• Easy Out Gun Filter
  • Filters from the inside out to prevent filter from collapsing
  • Interchangeable with all Contractor series guns

• Model: Contractor FTx
• Series: Airless Spray Gun

• Component A Inlet Size (in): 1/4
• Component A Inlet Thread Type: NPSM
• Component Type: Single Component

• Fluid Orifice Size (cm): 0.318
• Fluid Orifice Size (in): 0.125
• Fluid Orifice Size (mm): 3.17

• Gun Activation: Manual
• Gun Type: Airless Gun
• Gun Weight (oz): 23.8

• Includes: RAC 5 515 SwitchTip, RAC 5 HandTite Guard

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Product Type: Spray Gun

IW 11010

IW 4695

SATA 1061613

SATA 198358