Hose and Tubing

GG 215637

GG 214981

HOSE, COUPLED, 3/16" X 15'

Graco 214981 BlueMax II Airless Hose, 3/16 in x 15 ft

To maximize performance, choose BlueMax II high performance airless hose. With superior flexibility and durability, BlueMax II is designed to ensure you get the best results from your airless sprayer.

• Lighter Weight

  Over 10% lighter weight and increased hose flexibility improves usability while spraying under pressure

• Highest Safety Standards

  Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs

• Minimal Hose Coil Memory

  BlueMax II Hose has superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling

• Model: BlueMax II
• Series: Hose

• Hose Diameter (in): 3/16
• Hose Length (cm): 457
• Hose Length (ft): 15
• Hose Length (in): 180
• Hose Length (m): 4.6
• Hose Length (mm): 4560

• Inside Diameter (cm): 0.4763
• Inside Diameter (in): 3/16
• Inside Diameter (mm): 4.7625

• Material: Nylon

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3300

GG 214961

HOSE, COUPLED

Graco 214961 Nylon Suction Hose for Wall Mount Air Assisted Packages, 6 ft (1.8 m) long

GG 214959

GG 214955

GG 214698

HOSE, CPLD, 3/16" X 25'

Graco 214698 BlueMax II Airless Hose, 3/16 in x 25 ft (7.6 m)

To maximize performance, choose BlueMax II high performance airless hose. With superior flexibility and durability, BlueMax II is designed to ensure you get the best results from your airless sprayer.

• Lighter Weight

  Over 10% lighter weight and increased hose flexibility improves under pressure

• Highest Safety Standards

  Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs

• Minimal Hose Coil Memory

  BlueMax II Hose has superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling

• Model: BlueMax II
• Series: Hose

• Hose Diameter (in): 3/16
• Hose Length (cm): 762
• Hose Length (ft): 25
• Hose Length (in): 300
• Hose Length (m): 7.6
• Hose Length (mm): 7600

• Maximum Working Pressure (bar): 231
• Maximum Working Pressure (kPa): 2310
• Maximum Working Pressure (psi): 3300

GG 214697

HOSE, COUPLED, 3/16" X 50'

Graco 214697 BlueMax II Airless Hose, 3/16 in x 50 ft

To maximize performance, choose BlueMax II high performance airless hose. With superior flexibility and durability, BlueMax II is designed to ensure you get the best results from your airless sprayer.

• Lighter Weight

  Over 10% lighter weight and increased hose flexibility improves usability while spraying under pressure

• Highest Safety Standards

  Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs

• Minimal Hose Coil Memory

  BlueMax II Hose has superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling

• Model: BlueMax II
• Series: Hose

• Connection Type: JIC

• Hose Diameter (in): 3/16
• Hose Length (cm): 1524
• Hose Length (ft): 50
• Hose Length (in): 600
• Hose Length (m): 15.2
• Hose Length (mm): 15200

• Inside Diameter (cm): 0.4763
• Inside Diameter (in): 3/16
• Inside Diameter (mm): 4.7625

• Material: Nylon

• Maximum Working Pressure (bar): 227
• Maximum Working Pressure (kPa): 22700
• Maximum Working Pressure (MPa): 22.7
• Maximum Working Pressure (psi): 3300

GG 21203-00

GG 210867

GG 208048

GG 206749

GG 205406

GG 203266

GG 20260-00

GG 2005144

GG 2005146

GG 2005139

GG 2005141

GG 200033

GG 19M422

THERM-O-FLOW HOSE, HEATED, 15-FT, #20, 3000 PSI

Graco 19M422 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Hot Melt Heated Hose, No. 20 (1.13 in. / 28.6 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.

• Hose Heating Type: Heated
• Hose Length (ft): 15
• Hose Length (m): 4.6

• Inside Diameter (in): 1.13
• Inside Diameter (mm): 28.6

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature (°C): 204
• Maximum Temperature (°F): 400

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

GG 19M420

THERM-O-FLOW HOSE, HEATED, 25-FT, #16, 3000 PSI

Graco 19M420 25 ft. (7.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)

• Hose Heating Type: Heated
• Hose Length (ft): 25
• Hose Length (m): 7.6

• Inside Diameter (in): 0.867
• Inside Diameter (mm): 22.0

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature (°C): 204
• Maximum Temperature (°F): 400

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

GG 19M419

THERM-O-FLOW HOSE, HEATED, 20-FT, #16, 3000 PSI

Graco 19M419 20 ft. (6.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)

• Hose Heating Type: Heated
• Hose Length (ft): 20
• Hose Length (m): 6.1

• Inside Diameter (in): 0.867
• Inside Diameter (mm): 22.0

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature (°C): 204
• Maximum Temperature (°F): 400

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

GG 19M418

THERM-O-FLOW HOSE, HEATED, 15-FT, #16, 3000 PSI

Graco 19M418 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)

• Hose Heating Type: Heated
• Hose Length (ft): 15
• Hose Length (m): 4.6

• Inside Diameter (in): 0.867
• Inside Diameter (mm): 22.0

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature (°C): 204
• Maximum Temperature (°F): 400

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

GG 19M416

THERM-O-FLOW HOSE, HEATED, 6-FT, #16, 3000 PSI

Graco 19M416 6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)

• Hose Heating Type: Heated
• Hose Length (ft): 6
• Hose Length (m): 1.8

• Inside Diameter (in): 0.867
• Inside Diameter (mm): 22.0

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature (°C): 204
• Maximum Temperature (°F): 400

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

GG 19M417

THERM-O-FLOW HOSE, HEATED, 10-FT, #16, 3000 PSI

Graco 19M417 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)

Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.

• For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
• Maximum Fluid Working Pressure is dependent on operating temperature.
• Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)

• Hose Heating Type: Heated
• Hose Length (ft): 10
• Hose Length (m): 3

• Inside Diameter (in): 0.867
• Inside Diameter (mm): 22.0

• Material: PTFE Lined Stainless Steel Braid

• Maximum Temperature (°C): 204
• Maximum Temperature (°F): 400

• Maximum Working Pressure (bar): 276
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000