Search
Torque Control
Torque Wrench, TW SLO Adjustable 3/8 Drive, 4-20 NM
NTT 11087
NTT 11087
Torque Wrench, TW SLO Adjustable 3/8 Drive, 4-20 NM
$191.61
Model 100 Preset Torque Wrench, 1/2 Inch
NTT 13054
NTT 13054
Model 100 Preset Torque Wrench, 1/2 Inch
$198.17
P6-2H Screwdriver 1.25-6.25in lbs, 20-100in oz
STR 810501
STR 810501
Preset Torque Screwdrivers: Preset Torque Driver P Series, in-oz
| Product Group | : | Preset Torque Driver P Series, in-oz | |
| Hex Drive | : | 1/4 in | |
| Weight | : | .5 lb |
Product Description
- Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
- Torque can be set to any unit of measure
- Be sure to use a calibrated torque tester to set the torque value
- Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
- Bi-directional versatility - preset same value for both CW and CCW measurement
- 1/4" Female Hex drive uses power bits and insert bits
- Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
- Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
- Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
- Anti-backlash design for ergonomic comfort
- Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
- Sliding T Handle assists in turning the driver at higher torque values
- Well balanced tool that feels great in your hand
$204.60
PM 5
STR 810007
STR 810007
Preset Torque Screwdrivers: Preset Torque Screwdrivers - PM Series, in-lb
| Product Group | : | Preset Torque Screwdrivers - PM Series, in-lb | |
| Model | : | PM 5 | |
| Torque Range | : | 1-5 in.lb | |
| Overall Length | : | 5.5 in | |
| Weight | : | .25 lb |
Product Description
- Bi-directional accuracy of +/- 6% preset value
- Meets or exceeds ASME B107.300-2010 and ISO 6789
- Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
- Short dwell designed to prevent repetitive motion injuries
- Preset torque using torque tester and insert a bit to use
- Can be set in any unit of torque measurement
- Long shaft for use in limited-access applications
- Uses standard 1/4" bits, adapters, and sockets
- Polished aluminum exterior
- Anti-backlash design enhances repeatability
- Can be ordered preset from factory with calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
$218.22
Screwdriver, P20-2H
STR 810502
STR 810502
Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb
| Product Group | : | Preset Torque Driver P Series, in-lb | |
| Torque Range | : | 4-20 in.lb | |
| Hex Drive | : | 1/4 in | |
| Weight | : | .5 lb |
Product Description
- Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
- Torque can be set to any unit of measure
- Be sure to use a calibrated torque tester to set the torque value
- Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
- Bi-directional versatility - preset same value for both CW and CCW measurement
- 1/4" Female Hex drive uses power bits and insert bits
- Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
- Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
- Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
- Anti-backlash design for ergonomic comfort
- Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
- Sliding T Handle assists in turning the driver at higher torque values
- Well balanced tool that feels great in your hand
$224.95
LTC-50I Preset Torque Wrench
STR 810100
STR 810100
Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb
| Product Group | : | LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb | |
| Model | : | LTC 50 I | |
| Torque Range (Nm) | : | 1.2-6 Nm |
Product Description
- +/- 4% repeatability from 20% to 100% of capacity
- Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
- Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Low profile of the square drive creates access where other tools cannot go
- Flattened case is sideloading resistant
- Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
- Excellent tactile and audible pulse when the preset torque is achieved
- Cushion grip plus lightweight for excellent ergonomics
- Fixed square drive provides exceptional strength and durability
- CART tool
- Torque is preset and locked in with a special tool
- Torque can be set using any unit of measurement
- Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
- Can be ordered preset from the factory or you can set the torque with your own torque tester
$229.30
LTCS 50 I Wrench
STR 810168
STR 810168
Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb
| Product Group | : | LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb | |
| Model | : | LTCS 50 I | |
| Torque Range (Nm) | : | 1.2-6 Nm |
Product Description
- LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
- When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
- The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
- Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
- Cushioned comfort grip is lightweight and provides excellent ergonomics
- Slide pin ratchet provides strength and durability
- Easy to install ratchet renewal kit is available
- The torque is preset and locked in with a special tool
- Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
- Torque can be set using any unit of measurement
- Can be ordered preset from the factory or you can set the torque with your own torque tester
- Wrench measures torque in the clockwise direction
$241.95
Screwdriver, P40-2H
STR 810503
STR 810503
Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb
| Product Group | : | Preset Torque Driver P Series, in-lb | |
| Torque Range | : | 8-40 in.lb | |
| Hex Drive | : | 1/4 in | |
| Weight | : | .5 lb |
Product Description
- Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
- Torque can be set to any unit of measure
- Be sure to use a calibrated torque tester to set the torque value
- Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
- Bi-directional versatility - preset same value for both CW and CCW measurement
- 1/4" Female Hex drive uses power bits and insert bits
- Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
- Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
- Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
- Anti-backlash design for ergonomic comfort
- Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
- Sliding T Handle assists in turning the driver at higher torque values
- Well balanced tool that feels great in your hand
$248.52
LTC OHT 3001 180 in lbs.
STR 810574
STR 810574
Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb
| Product Group | : | LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb | |
| Model | : | LTC 300 I OHT | |
| Torque Range (Nm) | : | 40.8-204 Nm |
Product Description
- +/- 4% repeatability from 20% to 100% of capacity
- Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
- Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Low profile of the square drive creates access where other tools cannot go
- Flattened case is sideloading resistant
- Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
- Excellent tactile and audible pulse when the preset torque is achieved
- Cushion grip plus lightweight for excellent ergonomics
- Fixed square drive provides exceptional strength and durability
- CART tool
- Torque is preset and locked in with a special tool
- Torque can be set using any unit of measurement
- Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
- Can be ordered preset from the factory or you can set the torque with your own torque tester
$260.93
BLT 150 I
STR 874011
STR 874011
Click-Type Preset Torque Wrenches: BLT Bidirectional Preset Click-Type Torque Wrenches, in-lb
| Product Group | : | BLT Bidirectional Preset Click-Type Torque Wrenches, in-lb | |
| Model | : | BLT 150 I | |
| Torque Range (Nm) | : | 3.4-17 Nm |
Product Description
- SR Dovetail Head connects to over 100 SR Interchangeable Heads
- Error Proofing By Design: the SR Dovetail transmits the load at a right angle from the wrench to the head, providing exceptional strength and rigidity of the connection
- A pin lock on the dovetail assures positive head connection, yet permits head changeover in seconds
- CW +/- 4% Indicated Value Accuracy and CCW +/- 6% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
- we preset the tool to your requested torque value and we include a Certificate of Calibration from our ISO 17025 Accredited Lab
- Error Proofing By Behavior Modification: excellent tactile and audible pulse when the preset torque is achieved
- Error Proofing By Design: the flattened case prevents side-loading and ensures greater accuracy and durability
- Comfortable cushion grip plus light-weight for excellent ergonomics
- Preset and locked in with a special CART tool
- Torque can be set using any unit of measurement
- Can be ordered preset from the factory or you can set the torque with your own torque tester
- All of our tools provide torque measurements in the clockwise direction
- BLT preset click wrench measures torque in both clockwise and counterclockwise directions
$271.20
LTCS 150 I Wrench , 3/8 Sq Drive
STR 810170
STR 810170
Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb
| Product Group | : | LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb | |
| Model | : | LTCS 150 I | |
| Torque Range (Nm) | : | 3.39 -16.95 Nm |
Product Description
- LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
- When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
- The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
- Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
- Cushioned comfort grip is lightweight and provides excellent ergonomics
- Slide pin ratchet provides strength and durability
- Easy to install ratchet renewal kit is available
- The torque is preset and locked in with a special tool
- Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
- Torque can be set using any unit of measurement
- Can be ordered preset from the factory or you can set the torque with your own torque tester
- Wrench measures torque in the clockwise direction
$278.32
Payment options
