Hose and Tubing
Hose, Heated, 6ft., #8, 3000psi
GG 19M401
THERM-O-FLOW HOSE, HEATED, 6-FT, #8, 3000 PSI
Graco 19M401 6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 6
- Hose Length (m): 1.8
- Inside Diameter (in): 0.401
- Inside Diameter (mm): 10.2
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
GG 19M403
THERM-O-FLOW HOSE,HEATED,15-FT,#8,3000 PSI
Graco 19M403 15 ft. (4.6 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 8 (0.401 in. /10.2 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C) Rated at 3000 psi (207 bar, 20.7 Mpa) at Temperatures up to 400°F (204°C)
Hose, Heated, 10ft, #10, 3000 psi
GG 19M405
THERM-O-FLOW HOSE, HEATED, 10-FT, #10, 3000 PSI
Graco 19M405 10 ft. (3.0 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 10
- Hose Length (m): 3
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
Heated Hose 20-Ft, #10, 3000PSI
GG 19M407
THERM-O-FLOW HOSE, HEATED, 20-FT, #10, 3000 PSI
Graco 19M407 20 ft. (6.1 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 10 (0.495 in. / 12.6 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 20
- Hose Length (m): 6.1
- Inside Diameter (in): 0.495
- Inside Diameter (mm): 12.6
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
Heated Hose, 6Ft, No.16, 3000 PSI
GG 19M416
THERM-O-FLOW HOSE, HEATED, 6-FT, #16, 3000 PSI
Graco 19M416 6 ft. (1.8 M) Insulated Stainless Steel Braided PTFE Warm Melt/Hot Melt Heated Hose, No. 16 (0.867 in. / 22.0 mm ID)
Graco heated hoses are designed to give accurate and uniform temperature conditioning for your Sealant and Adhesive applications. Use these hoses to keep your material at the ideal temperature for the best possible dispense quality.
- For use with Graco temperature control systems for warm melt and hot melt sealants and adhesives.
- Maximum Fluid Working Pressure is dependent on operating temperature.
- Rated at 4000 psi (276 bar, 27.6 MPa) at Temperatures from -65°F to 212°F (-54°C to 100°C)
- Hose Heating Type: Heated
- Hose Length (ft): 6
- Hose Length (m): 1.8
- Inside Diameter (in): 0.867
- Inside Diameter (mm): 22.0
- Material: PTFE Lined Stainless Steel Braid
- Maximum Temperature (°C): 204
- Maximum Temperature (°F): 400
- Maximum Working Pressure (bar): 276
- Maximum Working Pressure (MPa): 27.6
- Maximum Working Pressure (psi): 4000
Hose, Heated, 1/4 x 50
GG 246074
REACTOR HEATED HOSE, 50', 1/4, W/O CABLE
Graco 246074 50 ft x 1/4 in Heated Hose, 2000 psi, Without Cable, No Scuff, Reactor 1 & 2
Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- New multi-strand copper heating element has greatly increased hose quality:
- Copper-heated hoses are designed specifically for use with Graco proportioners
- Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
- Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
- Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
- Helix-design whip hose uses braided copper wires for added flexibility and longer life
Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses
- Model: Reactor 1
- Series: No Scuff
- Compatible Sprayer: Reactor 1 & 2
- For Use With: Plural Component Proportioners
- Hose Heating Type: External Heated
- Hose Inside Diameter (in): 1/4
- Hose Inside Diameter (mm): 6.35
- Hose Length (ft): 50
- Hose Length (m): 15.2
- Inside Diameter (in): 1/4
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 13.8
- Maximum Working Pressure (psi): 2000
SDX 20, Grease, 3/8 In Inlet, 3/8 In x 50 Ft Hose, Overhead Mount, Metallic Blue
GG SDH55B
SDX SERIES 20 REEL, HOSE
Graco SDH55B SDX 20, Grease, 3/8 in (10 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT, Overhead Mount, Metallic Blue
Choose Graco's flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it's available in five colors
Application: With its durable metal spool and rigid pedestal frame, the compact SDX Series is ideal for indoor and limited outdoor use in car dealerships, fleet maintenance, public works garages and light-utility service trucks.- Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Adjustable Arm - Easily change the arm position for your application
- Durable Finish - Baked-on enamel finish protects reel from corrosion
- Model: SDX
- Series: 20
- Application: Grease
- Color: Metallic Blue
- Dry Weight (lb): 52
- Frame Type: Single Pedestal
- Hose Inside Diameter (in): 3/8
- Hose Inside Diameter (mm): 9.525
- Hose Length (ft): 50
- Hose Length (m): 15
- Hose Reel Type: Reel with Hose
- Includes Hose: Yes
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Gender: Male
- Inlet Thread Type: NPSM
- Maximum Temperature (°C): 93
- Maximum Temperature (°F): 200
- Maximum Working Pressure (psi): 4800
- Minimum Temperature (°C): -40
- Minimum Temperature (°F): -40
- Mount Location: Overhead Mount
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Gender: Male
- Outlet Thread Type: NPT
- Overall Height (in): 21.8
- Overall Height (mm): 554
- Overall Length (in): 19.2
- Overall Length (mm): 487
- Overall Width (in): 7
- Overall Width (mm): 177
- Recommended Environment: Indoor, Limited Outdoor
- Recommended Fluid Type: Grease
FEP Teflon Tubing, 8mm ID x 10mm OD, 500 Ft Roll
HO FEPM-10X8-RL
FEP Teflon Tubing, 8mm ID x 10mm OD, 500 Ft Roll
Payment options
