Hydraullic Units

EP DC8178827

• Type: Service Kit

• SubTypes: Power Board

EP DC8183827

• Type: Service Kit

• SubTypes: Power Board

EP DC8244259SR

• Type: Service Kit

• SubTypes: Motor Kit

EP DC8282379

• Type: Service Kit

• SubTypes: Repair Part

EP DC9951405

• Type: Service Kit

• SubTypes: Repair Part

EP DD6106037E

• Type: Service Kit

• SubTypes: Gasket

EP DS1018118E

• Type: ERP

• SubTypes: Repair Part

EP FZ-1660

EP FZ2069

• Type: Fitting
• Max Bar: 350
• Max PSI: 5000

• Product Group: Fittings, Pumps
• Product Line: Work Holding Tools
• Series: FZ
• SubTypes: Adapter

EP GA-1

EP H7350

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H9206

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC-7203B

EP HC-7210

EP HC7210B

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC9220

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC9220C

• Type: Component

• Product Line: Industrial Tools
• SubTypes: Heavy-duty Rubber Hose

EP HC9306

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC-9310

EP IPL-100

EP LGH310

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 10
• Capacity KN: 92

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM203

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 3
• Capacity KN: 26,7

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM305

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM306

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 6
• Capacity KN: 48,9

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP MK106

• The Simplex MK106 Maintenance Kit provides a complete assortment of attachments that greatly expands the range of applications. Using thesevarious attachments allows you to custom build spreaders, straightening tools, clamps and a wide variety of other problem solving maintenancetools.
• Set includes a Simplex hand pump, cylinder, hose, gauge and gauge adaptor.
• Heavy duty case included.
• Rated at 5 tons when attachments are used.
• Quick lock and threaded adaptors included.
• Order as a set or individual components.
• R106 is rated at 10 tons at 10,000 psi. When using attachments or extensions do not exceed 5,000 psi (5 tons) reading on the gauge. Accessories & extensions are only rated at 5 tons. S2000A Spreader has an operating capacity of 1 ton.
• Add collar toe and flat base to build custom spreader or toe jack.
• Extensions, custom heads and adapters allow you to create tools that solve hundreds of problems. Simplex MK106 kits are used extensively for collision repair.
• Add a V-base and flat base for special spreading, holding and bending jobs.

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: MK
• Stroke Inches: 6
• Stroke MM: 152.4
• SubTypes: Steel General Purpose Cylinder and Steel Hand Pump Set with 17 Cylinder Attachments

• Capacity Imperial Tons: 10
• Capacity KN: 89,0

• Set Includes: R106, P42, HCA6, G5, GA1-Simplex, S2000A, MK4, MK5, MK6, MK7, MK8, MK9, MK10, MK11, MK12, MK13, MK14, MK15, MK16, MK17, MK18, MK19, MK20, MK21