Hydraullic Units
BLADDER
EP CR706025
BLADDERSteel Jacks (JH-Series)
- Type: Service Kit
- SubTypes: Bladder
COMPRESSION SPRING
EP CR757110
COMPRESSION SPRINGPE/WE-Series
- Type: Service Kit
- SubTypes: Spring Kit
STOP RING
EP CR83044
STOP RINGSingle-Acting Low-Height Cylinders (RCS-Series and equivalent)
- Type: Service Kit
- SubTypes: Stop Ring
Control Pendant Rep Kit
EP CR881900SR
CONTROL PENDANT REP KITPE/WE-Series
- Type: Service Kit
- SubTypes: Pendant
SET SCREW
EP CS44028
SET SCREWPull Cylinders (BRP-Series and equivalent)
- Type: Service Kit
- SubTypes: Screw
SEAL KIT 18KN S/A METRIC/IMPERIAL
EP CST18K1
SEAL KIT 18KN S/A METRIC/IMPERIAL- Type: Service Kit
- SubTypes: Seal Kit
SPRING ASM
EP CU677900
SPRING ASMSingle-Acting Low-Height Flat-Jac Cylinders (RSM-Series and equivalent)
- Type: Service Kit
- SubTypes: Spring Kit
SWITCH
EP CU911372
SWITCHHydraulic Punches (SP-Series)
- Type: Service Kit
- SubTypes: Repair Part
OIL LEVEL DECAL
EP CU969026
OIL LEVEL DECALPE/WE-Series
- Type: Service Kit
- SubTypes: Decal
61.8 Ton Capacity, 0.24 in Stroke, Ultra Flat Hydraulic Cylinder with Stop-Ring
EP CULP50
61.8 Ton Capacity, 0.24 in Stroke, Ultra Flat Hydraulic Cylinder with Stop-RingCULP-Series Low Height Hydraulic Cylinders, also known as hydraulic pancake cylinders, offer an impressive power to height ratio, making them the right choice for confined spaces where other cylinders will not fit.
There are several configurations to choose from, with tonnage capacities ranging from 10 to 100 imperial tons (97-1077 kN), and collapsed heights from 1.08 - 2.55" (27.5 - 65mm).
All are finished with a tough Nitrocarburized coating for enhanced corrosion protection in harsh working environments.
Applications: Lift
- Type: Hydraulic Cylinders
- Max Bar: 700
- Max PSI: 10150
- Product Group: Cylinders and Jacks
- Product Line: Industrial Tools
- Series: CULP
- Stroke Inches: 0.24
- Stroke MM: 6
- SubTypes: Low Height Cylinder
- Up to 4% side load of maximum capacity
- Stop-ring for maximum stroke limitation
- Extremely low collapsed height
- Nitrocarburized surface treatment for harsh conditions
- Coupler included
- Spare Part(s): CULP50K
10.9 ton Capacity, 0.26 in Stroke, High Tonnage Ultra Flat Hydraulic Cylinder
EP CUSP10
10.9 ton Capacity, 0.26 in Stroke, High Tonnage Ultra Flat Hydraulic CylinderCUSP-Series Low Height Hydraulic Cylinders, also known as hydraulic pancake cylinders, combine an impressive power to height ratio with a tilting saddle function to distribute the load evenly and prevent side load.
These are available in several high-tonnage capacities, making them the right choice for confined spaces where other cylinders will not fit.
There are several configurations to choose from, including high tonnage capacities up to 1000 tons (10165 kN). These ultra-flat hydraulic cylinders have collapsed heights from 1.4 up to 4.06 (35.5 to 103 mm).
All are finished with a tough Nitrocarburized coating for enhanced corrosion protection in harsh working environments.
Applications: Lift
- Type: Hydraulic Cylinders
- Max Bar: 700
- Max PSI: 10150
- Product Group: Cylinders and Jacks
- Product Line: Industrial Tools
- Series: CUSP
- Stroke inch: 0.26
- Stroke MM: 6.7
- SubTypes: Low Height Cylinder
- Up to 4% side load of maximum capacity
- Extremely low collapsed height
- Integrated tilting function up to 4 degrees to evenly distribute the load
- Nitrocarburized surface treatment for harsh conditions
- Red Line for visual maximum stroke limitation Up to 4% side load of maximum capacity
- Coupler included
- Spare Part(s): CUSP10K
- Accessories: CHM6
121.1 ton Capacity, 0.58 in Stroke, High Tonnage Ultra Flat Hydraulic Cylinder
EP CUSP100
121.1 ton Capacity, 0.58 in Stroke, High Tonnage Ultra Flat Hydraulic CylinderCUSP-Series Low Height Hydraulic Cylinders, also known as hydraulic pancake cylinders, combine an impressive power to height ratio with a tilting saddle function to distribute the load evenly and prevent side load.
These are available in several high-tonnage capacities, making them the right choice for confined spaces where other cylinders will not fit.
There are several configurations to choose from, including high tonnage capacities up to 1000 tons (10165 kN). These ultra-flat hydraulic cylinders have collapsed heights from 1.4 up to 4.06 (35.5 to 103 mm).
All are finished with a tough Nitrocarburized coating for enhanced corrosion protection in harsh working environments.
Applications: Lift
- Type: Hydraulic Cylinders
- Max Bar: 700
- Max PSI: 10150
- Product Group: Cylinders and Jacks
- Product Line: Industrial Tools
- Series: CUSP
- Stroke inch: 0.58
- Stroke MM: 14.7
- SubTypes: Low Height Cylinder
- Up to 4% side load of maximum capacity
- Extremely low collapsed height
- Integrated tilting function up to 4 degrees to evenly distribute the load
- Nitrocarburized surface treatment for harsh conditions
- Red Line for visual maximum stroke limitation Up to 4% side load of maximum capacity
- Coupler included
- Spare Part(s): CUSP100K
- Accessories: CHM6
RESERVOIR
EP CW108025
RESERVOIRPE/WE-Series
- Type: Service Kit
- SubTypes: Repair Part
Receptacle
EP DA11539380
RECEPTACLEPU/PMU/WU-Series
- Type: Service Kit
- SubTypes: Repair Part
SPRING CLIP
EP DA2952017
SPRING CLIPPE/WE-Series
- Type: Service Kit
- SubTypes: Spring Kit
HOLE PLUG
EP DA3731009
HOLE PLUGPipe Bender Sets
- Type: Service Kit
- SubTypes: Repair Part
Payment options
