Spray Guns - Manual

GG 2005975

STELLAIR ACE GUN, COMPLIANT, .055, WITH HOSE

Graco 2005975 Stellair ACE Air Spray Gun with Hose, .055 in (1.4 mm) Nozzle Size

The unique carbon reinforced construction of this pressure feed air spray gun lightens the load for industrial painters. At 209 grams (7.4 ounces), Stellair ACE is up to 50 percent lighter than almost any other manual sprayer.

• Compliant, low volume medium pressure (LVMP) air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• Direct fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• Hoses with swivel attachments move with you at any angle, preventing tripping and injury.
• Trigger can be removed with the push of a button and can be used to remove the fluid cartridge.

• Model: Stellair ACE
• Series: Manual

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: General Industry
• Applicator Type: Air Spray

• Compatible Material: Enamel, Epoxy, Fast-Set, High Solids, Latex, Plural-Component, Sealants, Solventborne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (in): 0.125
• Fluid Inlet Size (mm): 3.175
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Type: HVLP/LVMP Gun
• Gun Weight (g): 209
• Gun Weight (oz): 7.4

• Hose Package: Includes Hose
• Includes: Air Cap, Needle Assembly, Nozzle, 6 ft air hose, 6 ft fluid hose

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

• Maximum Operating Temperature (°C): 43
• Maximum Operating Temperature (°F): 109

GG 24B864

AIRPRO GUN, ASSY, EFX, HVLP, .043

Graco 24B864 AirPro EFX Auto Air Spray Gun with Manifold, HVLP, 0.043 inch (1.1 mm) Nozzle, SST Tip, Indexing Fluid Adjust Knob

The AirPro EFX air spray automatic guns are among the lightest and most compact guns in their class. With no internal air shutoff mechanism, the AirPro EFX delivers increased reliability and precision fluid flow. The modest size and weight of this gun make it an excellent choice for fixed, reciprocating and robotic applications.

• Aircaps and nozzles deliver superior, precision spray performance
• Precision fluid adjustment with a micrometer-telescoping knob
• High wear components designed for abrasive materials

• Model: AirPro
• Series: EFX

• Applicator Type: Automatic

• Bleed Type: Bleeder
• Body Material: Plastic

• Compatible Material: Ceramics, Enamel, Fast-Set, High Solids, Solvent borne, Waterborne

• Component Type: Single Component

• Feed Type: Pressure Feed

• Fluid Adjustment Knob: Indexing
• Fluid Orifice Size (cm): 0.11
• Fluid Orifice Size (in): 0.043
• Fluid Orifice Size (mm): 1.1

• Gun Activation: Automatic
• Gun Type: HVLP Gun
• Gun Weight (kg): 0.59
• Gun Weight (lb): 1.3

• Includes: Air Cap with Pin, Fluid Adjustment Knob, Manifold, Needle/Nozzle Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Flow Rate @ PSI (oz/min): 8.5

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 49
• Maximum Fluid Temperature (°F): 120

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 49
• Maximum Fluid Temperature (°F): 120

• Minimum Flow Rate @ PSI (oz/min): 0.8

• Needle Tip Material: Stainless Steel

• Overall Height (cm): 2.6
• Overall Height (in): 1
• Overall Height (mm): 25
• Overall Length (cm): 10
• Overall Length (in): 4.1
• Overall Length (mm): 104
• Overall Width (cm): 3.8
• Overall Width (in): 1
• Overall Width (mm): 25

• Purge Method: Air

GG 258852

RS GUN, ASM, EXT MIX, CHOP

Graco 258852 RS External Mix Chop Gun with Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. Its lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It's available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun's revolutionary design and industry-first features can help boost your company's bottom line.

• Makes production easier

  Simple, quick start up and shut down

  Quick tool-less blade change

  No need to adjust needle settings after maintenance

  • Improves product quality

    Lightweight cutter gives better chopping control

    Easy one-hand cutter speed control

    Superior spray pattern

    • Improves operator comfort for increased job satisfaction

      Lighter, ergonomic gun reduces fatigue

      Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear

      No problems soaking the RS Gun in solvents overnight

      
      

      • Model: RS
      • Chop Gun Type: Without Cutter
      • Compatible Material: Polyester Resin, Gel-Coat
      • For Use With: FRP System
      • Gun Type: Chop Gun
      • Gun Weight (g): 1040
      • Gun Weight (kg): 1.04
      • Gun Weight (lb): 2.33
      • Gun Weight (oz): 36.68
      • Includes: CST443 Tip
      • Maximum Air Pressure (bar): 8.6
      • Maximum Air Pressure (kg/cm²): 9
      • Maximum Air Pressure (kPa): 860
      • Maximum Air Pressure (psi): 125
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm²): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature (°C): 38
      • Maximum Fluid Temperature (°F): 100
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm²): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature (°C): 38
      • Maximum Fluid Temperature (°F): 100
      • Minimum Air Inlet Pressure (bar): 0
      • Minimum Air Inlet Pressure (kPa): 0
      • Minimum Air Inlet Pressure (psi): 0
      • Mix Type: External Mix

GG 258970

RS GUN, ASM, EXT MIX, CHOP

Graco 258970 RS External Mix Chop Gun with Cutter and Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. Its lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It's available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun's revolutionary design and industry-first features can help boost your company's bottom line.

• Makes production easier

  Simple, quick start up and shut down

  Quick tool-less blade change

  No need to adjust needle settings after maintenance

  • Improves product quality

    Lightweight cutter gives better chopping control

    Easy one-hand cutter speed control

    Superior spray pattern

    • Improves operator comfort for increased job satisfaction

      Lighter, ergonomic gun reduces fatigue

      Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear

      No problems soaking the RS Gun in solvents overnight

      
      

      • Model: RS
      • Chop Gun Type: With Cutter
      • Compatible Material: Polyester Resin, Gel-Coat
      • For Use With: FRP System
      • Gun Type: Chop Gun
      • Gun Weight (g): 1057
      • Gun Weight (kg): 1.06
      • Gun Weight (lb): 2.33
      • Gun Weight (oz): 37.28
      • Includes: CST443 Tip, Cutter
      • Maximum Air Pressure (bar): 8.6
      • Maximum Air Pressure (kg/cm²): 8.79
      • Maximum Air Pressure (kPa): 860
      • Maximum Air Pressure (psi): 125
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm²): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature (°C): 38
      • Maximum Fluid Temperature (°F): 100
      • Maximum Fluid Pressure (bar): 138
      • Maximum Fluid Pressure (kg/cm²): 141
      • Maximum Fluid Pressure (kPa): 13800
      • Maximum Fluid Pressure (psi): 2000
      • Maximum Fluid Temperature (°C): 38
      • Maximum Fluid Temperature (°F): 100
      • Minimum Air Inlet Pressure (bar): 5.5
      • Minimum Air Inlet Pressure (kPa): 550
      • Minimum Air Inlet Pressure (psi): 80
      • Mix Type: External Mix

GG 288421

CONTRACTOR GUN, RAC 5(PKGD)

Graco 288421 Contractor Airless Spray Gun, 2 Finger Trigger, RAC 5 517 SwitchTip

The Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 2-finger trigger and a RAC 5 517 SwitchTip and Guard.

• Exclusive FlexSeal Needle
  • Totally enclosed patented design eliminates needle's exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
  • Fluid pushes on seal to quickly shut off needle and reduce spitting
  • Spring is located outside fluid path for better flow
  • Helps eliminate pack out and slow needle shut-off
• Reduced Gun Spitting
  • Repositioned seat is closer to the tip, eliminating 60% of the dead space
  • Less paint left between needle and tip results in less spitting
• Ergonomic Design
  • Form-fitted handle provides maximum control and comfort
  • Detachable trigger guard swings clear of gun handle for easy filter access
  • Lightweight design reduces operator fatigue
• Modular Needle Design
  • Simply remove the trigger cross pin and unthread front housing to change out needle
• EasyGlide Swivel
  • Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
• Easy Out Gun Filter
  • Filters from the inside out to prevent filter from collapsing
  • Interchangeable with all Contractor series guns

• Model: Contractor
• Series: Airless Spray Gun

• Component A Inlet Size (in): 1/4
• Component A Inlet Thread Type: NPSM

• Fluid Orifice Size (cm): 0.318
• Fluid Orifice Size (in): 0.125
• Fluid Orifice Size (mm): 3.17

• For Use With: Airless Sprayers

• Gun Activation: Manual
• Gun Type: Airless Gun
• Gun Weight (oz): 22

• Includes: RAC 5 517 SwitchTip, RAC 5 HandTite Guard

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Product Type: Spray Gun

GG 289008

AIRPRO GUN, COMP, .055

Graco 289008 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Compliant Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

GG 289257

FINEX GUN, 2, MINI, HVLP, .8

Graco 289257 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.031 in (0.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

• Aircaps optimized for high quality spray performance
• Lightweight, ergonomic gun
• Lightest trigger pull in its category

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Mini Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.08
• Fluid Orifice Size (in): 0.031
• Fluid Orifice Size (mm): 0.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (kg): 0.4
• Gun Weight (lb): 0.9

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature (°C): 43
• Maximum Fluid Temperature (°F): 109

• Product Type: Spray Gun

IW 4911

IW 5440B-S1

IW 5540

IW 7041

IW ECL4500

SATA 220467

SATA 48173

BB 1600-HF1310

BB 2101-2800-0

BB 2101-4300-7

BB 2101-5111-5GW

BB 2465-10HV-39S0

BB 2465-18LV-23S0

BB 98-1229

DD 303937

DD ADV-G507-14

DD ADV-P510-18

DD ADV-S510-18