Airpower | Bits and Sockets

7/16 Hex X 1/2 Sq. Quick Release Chuck

AX QR-514

QR CHUCK 1/2" SQ DR 7/16" HEX 2-1/8" OAL
Female Square Drive, Quick Releasing Chucks - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.454 lb

Hex Open. (A): 7/16 in
Magnetism: Non-Magnetic

Opening Depth (F): 1-1/16 in, 27 mm

Set: No
Sleeve Diameter (E): 1-1/4 in, 32 mm

$64.60

QR CHUCK 1/2" SQ DR 5/8" HEX 2-5/8" OAL

AX QR-520

QR CHUCK 1/2" SQ DR 5/8" HEX 2-5/8" OAL
Female Square Drive, Quick Releasing Chucks - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 1.064 lb

Hex Open. (A): 5/8 in
Magnetism: Non-Magnetic

Opening Depth (F): 1-1/2 in, 38 mm

Set: No
Sleeve Diameter (E): 1-5/8 in, 41 mm

$99.38

7/16 Hex X 3/4 Sq. Quick Release Chuck

AX QR-714

QR CHUCK 3/4" SQ DR 7/16" HEX 2-3/8" OAL
Female Square Drive, Quick Releasing Chucks - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.679 lb

Hex Open. (A): 7/16 in
Magnetism: Non-Magnetic

Opening Depth (F): 1-1/16 in, 27 mm

Set: No
Sleeve Diameter (E): 1-1/4 in, 32 mm

$107.26

1/4 Hex Power Drive Quick Release

AX QR-M-490-A

MAG BITHLDR 1/4 HEXDR 1/4 HEX 2-57/64 QR
1/4" Hex Drive for 1/4" Hex Inserts, Quick Release - Bit Holders

Weight: 0.092 lb
Description: Magnetic, quick release

Magnetism: Magnetic

Overall Length: 2.9 in, 74.0 mm
Set: No

$28.25

1/4 Hex Power Drive Quick Release 6 OAL

AX QR-M-490-A6

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL
1/4" Hex Drive for 1/4" Hex Inserts, Quick Release - Bit Holders

Weight: 0.160 lb
Description: Magnetic, quick release

Magnetism: Magnetic

Overall Length: 6.0 in, 152.0 mm
Set: No

$91.49

3/8 -24 thread X 1/4 hex QC

AX QRA-08

QR CHUCK 3/8-24 THD DR 1/4 HEX 1-3/4 OAL
Female Threaded Drive, Quick Releasing Chucks

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.164 lb

Female Thread: 3/8"-24

Hex Opening: 1/4 in
Magnetism: Non-Magnetic

Opening Depth: 61/64 in, 24 mm

Overall Diameter: 3/4 in, 19 mm
Overall Length: 1.75 in, 45.0 mm
Set: No

$88.84

1/2 -20 Quick Release Threaded Drive Bit

AX QRF-08

ADAP 1/2-20 FEM THRDDR 1/4 HEX 1-3/4 OAL
Female Threaded Drive, Quick Releasing Chucks

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.146 lb

Female Thread: 1/2"-20

Hex Opening: 1/4 in
Magnetism: Non-Magnetic

Opening Depth: 61/64 in, 24 mm

Overall Diameter: 3/4 in, 19 mm
Overall Length: 1.75 in, 45.0 mm
Set: No

$101.60

1/4 Hex Slotted Power Drive X 10F-12R

AX R-320X

BIT 1/4HXPWRDRW/SL10F-12RSLT3-25/32" 96MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.138 lb
Body Diameter: .350 in, 8.89 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 10F-12R
Set: No

$16.46

Spring Pin Retainer

AX RP-314

Spring Pin Retainer

$13.34

Wuc Ab 1/2 F04

AX RP-514

Wuc Ab 1/2 F04

$15.20

Floating Adapter, Guided Size 2, 3/4

AX S308450

Floating Adapter, Guided Size 2, 3/4

$1,134.65

3/8 Sq Dr x 3/8, UW, 12/Minimum

AX SA-122-D

UNV WRNCH 3/8 SQDR 3/8 DB HEX 1-57/64OAL
1/2" Drive 6 & 12 Point SAE Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.140 lb
Clearance Depth (E): 3/8 in
Diameter Nose End (D): 9/16 in

Hex Opening: 3/8 in
Magnetism: Non-Magnetic

Opening Modifier: Double Hex

Overall Length A: 1-57/64 in
Set: No

$49.26

3/8 Sq Drv Universal Wrench X 7/16 Hex

AX SA-123

UNV WRENCH 3/8 SQ DR 7/16 HEX 2" OAL
1/2" Drive 6 & 12 Point SAE Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.145 lb
Clearance Depth (E): 1/2 in
Diameter Nose End (D): 19/32 in

Hex Opening: 7/16 in
Magnetism: Non-Magnetic

Opening Modifier: 6 Point Hex

Overall Length A: 2-1/64 in
Set: No

$54.78

1/2 Sq. Drv Universal Wrench X 9/16 Hex

AX SA-219

UNV WRENCH 1/2 SQ DR 9/16 HEX 2-11/32
1/2" Drive 6 Point SAE Double Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.244 lb
Clearance Depth (E): 17/32 in
Diameter Nose End (D): 3/4 in

Hex Opening: 9/16 in

Overall Length A: 2-23/64 in
Set: No

$55.50

Unv Wrench, 1/2 Sq. Drive X 5/8 6 Pt Hex

AX SA-221

UNV WRNCH 1/2 SQ DR 5/8 HEX 2-13/32" OAL
1/2" Drive 6 Point SAE Double Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.255 lb
Clearance Depth (E): 19/32 in
Diameter Nose End (D): 7/8 in

Hex Opening: 5/8 in

Overall Length A: 2-27/64 in
Set: No

$58.08

5/8 UNV WR, 1/4 Sqare Dr, 3/8 Hex, 1.593 Inchs OAL

AX SA-28

UNV WRNCH 1/4 SQ DR 3/8 HEX 1-37/64" OAL
1/4" Drive 6 Point SAE Universal Wrenches

Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.054 lb
Clearance Depth (E): 7/16 in
Diameter Nose End (D): 17/32 in

Hex Opening: 3/8 in
Magnetism: Non-Magnetic

Opening Modifier: 6 Point Hex

Overall Length A: 1-19/32 in
Set: No

$53.06

Unv Wrench, 1/2 Sq. Drive Socket X 3/4 6 Pt. Hex

AX SA-322

UNV WRENCH 1/2 SQ DR 3/4 HEX 2-9/16 OAL
1/2" Drive 6 Point SAE Double Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.345 lb
Clearance Depth (E): 11/16 in
Diameter Nose End (D): 1-1/8 in

Hex Opening: 3/4 in

Overall Length A: 2-37/64 in
Set: No

$73.64

1/2 Sq. Drv Universal Wrench X 19mm Hex

AX SA-510-19M

UNV WRENCH 1/2 SQ DR 19MM HEX 73MM OAL
1/2" Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.518 lb
Clearance Depth (E): 16.3 mm
Diameter Nose End (D): 26.2 mm

Hex Opening: 19 mm

Overall Length A: 73 mm
Set: No

$94.93

Universal Wrench 21MM, 1/2 Square Drive

AX SA-510-21M

UNV WRENCH 1/2 SQ DR 21MM HEX 73MM OAL
1/2" Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.547 lb
Clearance Depth (E): 16.3 mm
Diameter Nose End (D): 28.6 mm

Hex Opening: 21 mm

Overall Length A: 73 mm
Set: No

$164.98

1-1/4 UN WR 1/2 SQ DR 22MM Hex 2.890 Oal, 12/Minimum

AX SA-510-22M

UNV WRENCH 1/2 SQ DR 22MM HEX 73MM OAL
1/2" Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.019 lb
Clearance Depth (E): 16.3 mm
Diameter Nose End (D): 31.8 mm

Hex Opening: 22 mm

Overall Length A: 73 mm
Set: No

$112.86

Unv Wrench 1/2 Sq Dr 18Mm Hex 65Mm Oal

AX SA-58-18M

UNV WRENCH 1/2 SQ DR 18MM HEX 65MM OAL
1/2" Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.319 lb
Clearance Depth (E): 17.5 mm
Diameter Nose End (D): 25.4 mm

Hex Opening: 18 mm

Overall Length A: 66 mm
Set: No

$71.27

UNV Wrench 3/8 SQ DR 10MM Hex 47.5MM Oal

AX SA-C-36-10M

UNV WRENCH 3/8 SQ DR 10MM HEX 47.5MM OAL
3/8" Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.020 lb
Clearance Depth (E): 9.5 mm
Diameter Nose End (D): 15.1 mm

Hex Opening: 10 mm

Overall Length A: 48 mm
Set: No

$67.18

3/8" SQ. DR. Universal Socket

AX SA-C-37-13M

UNV WRENCH 3/8 SQ DR 13MM HEX 52.2MM OAL
3/8" Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30Â°.

Weight: 0.179 lb
Clearance Depth (E): 11.9 mm
Diameter Nose End (D): 17.5 mm

Hex Opening: 13 mm

Overall Length A: 52 mm
Set: No

$73.42

1/4 Sq. Drv Bit Holder Adapter X 1/4 Hex

AX SC-108

ADAPTR 1/4 SQ DR 1/4 FEM HEX 1-1/4 OAL
Bit Holders/Adapters with Set Screw or Thru Hole

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.086 lb
Body Diameter (D): 3/4 in, 19 mm

Hex Open. (A): 1/4 in
Magnetism: Non-Magnetic

Opening Depth (E): 5/8 in, 16 mm

Set: No

$31.33

3/8 Sq. Drv Bit Holder Adapter X 1/4 Hex

AX SC-308

ADAPTR 3/8 SQ DR 1/4 FEM HEX 1-1/2" OAL
Bit Holders/Adapters with Set Screw or Thru Hole

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.112 lb
Body Diameter (D): 3/4 in, 19 mm

Hex Open. (A): 1/4 in
Magnetism: Non-Magnetic

Opening Depth (E): 5/8 in, 16 mm

Set: No

$17.48

Bits and Sockets

AX QR-514

AX QR-520

AX QR-714

AX QR-M-490-A

AX QR-M-490-A6

AX QRA-08

AX QRF-08

AX R-320X

AX RP-314

AX RP-514

AX S308450

AX SA-122-D

AX SA-123

AX SA-219

AX SA-221

AX SA-28

AX SA-322

AX SA-510-19M

AX SA-510-21M

AX SA-510-22M

AX SA-58-18M

AX SA-C-36-10M

AX SA-C-37-13M

AX SC-108

AX SC-308

Payment options