Airpower | Bits and Sockets

1/4 Hex Insert X #3 Pt Phillips X 1

AX 440-3X

BIT 1/4 HEX INS #3 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$0.95

1/4 Hex Insert X #4Pt Phillips X 1-5/16

AX 440-4X

BIT 1/4 HEX INS #4 PH 1-5/16" 33MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 7.658 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.31 in, 33.0 mm
Point Size: 4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$3.38

1/4 Hex Insert X #00 MorTorq Bit X 1

AX 440-MT-00

BIT 1/4 HEX INS #00 MORTORQ 1" 25MM OAL
MorTorq Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Other drive sizes/types and point sizes can be quoted. Contact your Apex Distributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Other drive sizes/types and point sizes can be quoted. Contact your Apex Distributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw Company.

Weight: 0.010 lb

Drive: Hex Insert
Drive Size: 1/4 in - Hex Insert
Fastener Type: MorTorq

MorTorq Size: 00

Overall Length: 1.0 in, 25.0 mm
Set: No

$13.68

1/4 Hex Insert Bit X T-05 Torx Hex X 1

AX 440-TX-05X

BIT 1/4 HEX INS T5 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-5
Fastener Type: Torx

Measurement Across Lobes: .055 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.63

1/4 Hex Insert Bit X T-08-H Torx (TR)

AX 440-TX-08-H

BIT 1/4 HEX INS T8 TORX 1" 25MM OAL
1/4" Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-8-H
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.61

1/4 Hex Insert Bit X T-10 Torq Hex X 1

AX 440-TX-10X

BIT 1/4 HEX INS T10 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.39

1/4 Hex Insert Bit X T-15-H Torx Hex(TR)

AX 440-TX-15-H

BIT 1/4 HEX INS T15 TORX 1" 25MM OAL
1/4" Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-15-H
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.22

1/4 Hex Insert Bit X T-15 Torx Hex x 1

AX 440-TX-15X

BIT 1/4 HEX INS T15 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.39

1/4in Hex Insert by T-20

AX 440-TX-20-125

BIT 1/4 HEX INS T20 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Insert
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$10.02

1/4 Hex Bit, Torx Bit T20, 2 Long

AX 440-TX-20-2

BIT 1/4 HEX INS T20 TORX 2" 51MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.026 lb

Drive: Hex Insert
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 2.0 in, 51.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.83

1/4 Hex Insert Bit X T-20 Torx Hex X 1

AX 440-TX-20X

BIT 1/4 HEX INS T20 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.43

1/4 Hex Insert Bit X T-25-H Torx Hex(TR)

AX 440-TX-25-H

BIT 1/4 HEX INS T25 TORX 1" 25MM OAL
1/4" Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-25-H
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.22

1/4 Hex Insert Bit X T-25 Torx Hex X 1

AX 440-TX-25X

BIT 1/4 HEX INS T25 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-25
Fastener Type: Torx

Long Description: 1/4", Hex Insert Bits

Measurement Across Lobes: .173 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.43

1/4 Hex Insert Bit X T-27-H Torx Hex(TR)

AX 440-TX-27-H

BIT 1/4 HEX INS T27 TORX 1" 25MM OAL
1/4" Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recessâ€“this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-27-H
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.22

1/4 Hex Insert Bit X T-27 Torx Hex X 1

AX 440-TX-27X

BIT 1/4 HEX INS T27 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.43

1/4 Hex Insert Bit X T-30 Torx Hex X 1

AX 440-TX-30X

BIT 1/4 HEX INS T30 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.013 lb

Drive: Hex Insert
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.43

1/4 Hex Insert Bit X T-40 Torx Hex X 1

AX 440-TX-40X

BIT 1/4 HEX INSERT T40 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Insert
Drive Size: T-40
Fastener Type: Torx

Measurement Across Lobes: .260 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$3.43

1/4 Hex Insert Bit X T-45 Torx X 1-1/4

AX 440-TX-45X

BIT 1/4 HEX INS T45 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.56

1/4 Hex Insert Bit X T-50 Torx X 1 1/4

AX 440-TX-50X

BIT 1/4 HEX INS T50 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.027 lb

Drive: Hex Insert
Drive Size: T-50
Fastener Type: Torx

Measurement Across Lobes: .346 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$6.08

1/4 Hex Slotted Insert X 1F-2R X 1

AX 445-000X

BIT 1/4 HEX INS 1F-2R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.010 lb
Blade Width: 0.125 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4" Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 1F-2R
Set: No

$2.51

1/4 Hex Slotted Insert X 3F-4R X 1

AX 445-0X

BIT 1/4 HEX INS 3F-4R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb
Blade Thickness: .030 in
Blade Width: 0.154 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4", Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 3F-4R
Set: No

$2.55

1/4 Hex Slotted Insert X 4F-5R X 1

AX 445-10X

BIT 1/4 HEX INS 4F-5R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb
Blade Thickness: .034 in
Blade Width: 0.185 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4", Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 4F-5R
Set: No

$3.61

1/4 Hex Slotted Insert X 4F-5R X 1

AX 445-1X

BIT 1/4 HEX INS 4F-5R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.19 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 4F-5R
Set: No

$2.27

1/4 Hex Slotted Insert X 5F-6R X 1 1/2

AX 445-20-15X

BIT 1/4 HEX INS 5F-6R SLOT 1-1/2" 38MM
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.015 lb
Blade Width: 0.216 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.5 in, 38.0 mm
Screw Size: 5F-6R
Set: No

$3.61

1/4 Hex Slotted Insert X 5F-6R X 1

AX 445-20X

BIT 1/4 HEX INS 5F-6R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.012 lb
Blade Thickness: .036 in
Blade Width: 0.216 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 5F-6R
Set: No

$3.61

Bits and Sockets

AX 440-3X

AX 440-4X

AX 440-MT-00

AX 440-TX-05X

AX 440-TX-08-H

AX 440-TX-10X

AX 440-TX-15-H

AX 440-TX-15X

AX 440-TX-20-125

AX 440-TX-20-2

AX 440-TX-20X

AX 440-TX-25-H

AX 440-TX-25X

AX 440-TX-27-H

AX 440-TX-27X

AX 440-TX-30X

AX 440-TX-40X

AX 440-TX-45X

AX 440-TX-50X

AX 445-000X

AX 445-0X

AX 445-10X

AX 445-1X

AX 445-20-15X

AX 445-20X

Payment options