Charger, 40V
IR BC1161
IQV 40V Universal Lithium-ion Battery Charger for Ingersoll Rand Power Tools
Description: The BC1161 lithium-ion 40V charger gets the batteries in our IQV 40 Series charged and ready to go whenever you are. This innovative, multi-use battery charger will help you get back to work without missing a step. Compatible only with the IQV 40 BL4011 40 volt battery.
Features And Benefits:
- Productivity: An LED Fuel Gauge and audible alarm will let you know when your batteries are fully charged and ready to get back to work.
- Versatility: Not only can the BC1161 be mounted vertically or horizontally on a wall or work bench but the USB charge port on the side means you don't have to fight for an outlet with your tablet or smart phone. Let us take care of the clutter, you take care of your work.
Product Application and Uses:
Compatible only with the Ingersoll Rand IQV 40 Series BL4011 40 volt battery.
- Charge Time: 55 minutes
- Color: Grey
- Voltage DC: 40
- Warranty: 3-year
- Accessories: BL4011
Beam Clamp - 1 Ton -Bct Series
IR BCT-1
Beam Clamp, 1 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp  - 10 Ton - Bct Series
IR BCT-10
Beam Clamp, 10 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp - 3 Ton -Bct Series
IR BCT-3
Beam Clamp, 3 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp - 2 Ton -Bct Series
IR BCT-2
Beam Clamp, 2 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp  - 5 Ton - Bct Series
IR BCT-5
Beam Clamp, 5 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Hose Per Ft, Specify Length, Non-Returnable Part
IR BH6C
Hose Per Ft, Specify Length, Non-Returnable Part
Spring Balancer , 22-33 lbs.
IR BHD-15
Heavy Duty Spring Balancer, 22-33 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 22 - 33
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 22.7
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Heavy-Duty Balancer 33-44 lbs
IR BHD-20
Heavy Duty Spring Balancer, 33-44 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 33 - 44
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 23.4
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer, 55-66 Lbs
IR BHD-30
Heavy Duty Spring Balancer, 55-66 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 55 - 66
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 25.4
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer
IR BHD-65
Heavy Duty Spring Balancer, 121-143 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 121 - 143
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 30
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Battery, Iqv20V 2.5Ah
IR BL2012
IQV20 20V 2.5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
Description: The BL2012 IQV20 Series High Capacity r2.5 lithium ion battery delivers a high-charge capacity with low internal impedance for maximum power delivery and run-time. The intelligent Battery Management System allows the battery to communicate with the tool and charger to offer triple battery protection. The slim pack design is fully compatible with our charger.
Features And Benefits:
- Performance: The BL2012 20V 2.5Ah battery delivers 95% longer run time than its predecessor the BL2005 (That's over 221 lug nuts when used with the W5130!). And at the same size and weight as the previous model you can get more work done on a single charge.
- Durability: The intelligent Battery Management System (BMS) allows the battery to communicate with the tool and charger to offer triple battery protection prevent over loading over charging and over discharging for longer tool and battery life.
- Versatility: The BL2012 2.5Ah batteries slim design allows you to go further with less in your way. Its light weight doesn't compromise power letting you keep working on big jobs with a slimmer tool.
- Battery Fuel Gauge - 4 light positions
- Quick charging feature in one hour or less
Product Application and Uses:
IQV20 Series cordless tools
- Battery Capacity (Ah): 2.5
- Battery Capacity (Wh): 49
- Charge Time: 40 minutes
- Color: Grey
- Number of Battery Cells: 5
- Power Source: Battery Powered
- Product Length (in): 4.8
- Product Width (in): 3.1
- Product Height (in): 2.1
- Product Weight (lb): 0.95
- Voltage DC: 20
- Warranty: 2-year
- Battery Type: Tabbed
- Accessories: BC1124
- Accessories: BC1124-EU
- Accessories: BC1221
- Accessories: BC1221-EU
- Accessories: BL2005-BOOT
- Accessories: BC1124-CN
- Accessories: BC1124-JP
- Accessories: BC1124-ANZ
- Accessories: BC1124-KR
- For Use With: D3141
- For Use With: D3141-K22
- For Use With: D3141-K22-AP1
- For Use With: D3141-K22-AR
- For Use With: D3141-K22-BR
- For Use With: D3141-K22-CN
- For Use With: D3141-K22-EU
- For Use With: D3141-K22-IN
- For Use With: D3141-K22-JP
- For Use With: D3141-K22-KR
- For Use With: D3411
- For Use With: D3411-K22
- For Use With: D3411-K22-AP1
- For Use With: D3411-K22-CN
- For Use With: D3411-K22-EU
- For Use With: D3411-K22-IN
- For Use With: D3411-K22-JP
- For Use With: G4621
- For Use With: IQV20-K201
- For Use With: QCN2A30S6
- For Use With: QCN2P02Q4
- For Use With: QCN2P08Q4
- For Use With: QCN2P12Q4
- For Use With: QCP2A30S6
- For Use With: QCP2A30S6-K2-CN
- For Use With: QCP2A30S6-K2-EU
- For Use With: QCP2A30S6-K2-IN
- For Use With: QCP2P02Q4
- For Use With: QCP2P04Q4
- For Use With: QCP2P04Q4-K2-CN
- For Use With: QCP2P04Q4-K2-EU
- For Use With: QCP2P04Q4-K2-IN
- For Use With: QCP2P08Q4
- For Use With: QCP2P08Q4-K2-CN
- For Use With: QCP2P08Q4-K2-EU
- For Use With: QCP2P08Q4-K2-IN
- For Use With: QCP2P12Q4
- For Use With: QCP2P12Q4-K2-CN
- For Use With: QCP2P12Q4-K2-EU
- For Use With: QCP2P12Q4-K2-IN
- F
Battery, 20V, 5.0Ah
IR BL2022
IQV20 20V 5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
Description: The BL2022 IQV20 Series High Capacity x5.0 Battery delivers unmatched performance with 68% longer run time and the same size and weight as its predecessor. Fully compatible with all existing IQV20 tools and chargers and equipped with the same intelligent Battery Management System (BMS) we make sure you get more out of every volt.
Features And Benefits:
- Power: High Capacity 20V 5.0Ah battery delivers longer run time to get more work done on a single charge.
- Optimization: Intelligent Battery Management System protects against over loading, over charging and over discharging for longer tool and battery life.
- Compatibility: BL2022 5.0Ah battery is compatible with all IQV20 series power tools and 20V battery charger allowing you to swap batteries and tools to get the job done right every time.
- Performance: The BL2022 Lithium-Ion 20V 5.0Ah battery delivers 66% longer run time than its predecessor (That's over 800 lug nuts when used with the IR W7150 cordless impact wrench).
- Battery Fuel Gauge - 4 light positions.
- Quick charging feature in one hour or less.
Product Application and Uses:
IQV20 Series cordless tools
- Battery Capacity (Ah): 5
- Battery Capacity (Wh): 100
- Charge Time: 80 minutes
- Color: Grey
- Number of Battery Cells: 10
- Power Source: Battery Powered
- Product Length (in): 4.8
- Product Width (in): 3.1
- Product Height (in): 2.8
- Product Weight (lb): 1.61
- Voltage DC: 20
- Warranty: 2-year
- Battery Type: Tabbed
- Accessories: BC1124
- Accessories: BC1221
- Accessories: BL2010-BOOT
- For Use With: C5101
- For Use With: D3141
- For Use With: D3141-K22
- For Use With: D3141-K22-AR
- For Use With: D3141-K22-BR
- For Use With: D3141-K22-CN
- For Use With: D3141-K22-EU
- For Use With: D3141-K22-IN
- For Use With: D3141-K22-JP
- For Use With: D3141-K22-KR
- For Use With: D3411
- For Use With: D3411-K22
- For Use With: D3411-K22-AP1
- For Use With: D3411-K22-CN
- For Use With: D3411-K22-EU
- For Use With: D3411-K22-IN
- For Use With: D3411-K22-JP
- For Use With: D5140-K22-EU
- For Use With: D5241
- For Use With: D5241-K22
- For Use With: D5241-K22-AP1
- For Use With: D5241-K22-AR
- For Use With: D5241-K22-BR
- For Use With: D5241-K22-CN
- For Use With: D5241-K22-EU
- For Use With: D5241-K22-IN
- For Use With: D5241-K22-JP
- For Use With: D5241-K22-KR
- For Use With: G5351
- For Use With: G5351-K22
- For Use With: G5351M
- For Use With: G5351M-K22-AP
- For Use With: G5351M-K22-AR
- For Use With: G5351M-K22-BR
- For Use With: G5351M-K22-EU
- For Use With: G5351M-K22-IN
- For Use With: G5351M-K22-JP
- For Use With: QCN2A30S6
- For Use With: QCN2P02Q4
- For Use With: QCN2P08Q4
- For Use With: QCN2P12Q4
- For Use With: QCP2A30S6
- For Use With: QCP2A30S6-K2-CN
- For Use With: QCP2A30S6-K2-EU
- For Use With: QCP2A30S6-K2-IN
- For Use With: QCP2P02Q4
- For Use With: QCP2P04Q4
- For Use With: QCP2P04Q4-K2-CN
- For Use With:
Battery, 40V, 2.5 Amp
IR BL4011
IQV40 40V 2.5Ah Lithium-Ion Battery for Ingersoll Rand Power Tools
Description: The IQV40 Series high-power, 40-volt lithium-ion battery delivers a high-charge capacity with low internal impedance for maximum power delivery and run-time. Complete with an intelligent Battery Management System (BMS), the IQV40 battery provides power-level and current control from the battery to the switch to the motor for increased torque and runtime.
Features And Benefits:
- Durability: The intelligent Battery Management System allows the battery to communicate with the tool and charger to offer triple battery protection, prevent over loading over charging and over discharging for longer tool and battery life.
- Compatibility: For use with any Ingersoll Rand IQV40 series cordless tool.
Product Application and Uses:
For use with any Ingersoll Rand IQV 40 Series cordless power tool.
- Battery Capacity (Ah): 2.5
- Battery Capacity (Wh): 100
- Charge Time: 85 minutes
- Color: Grey
- Number of Battery Cells: 10
- Power Source: Battery Powered
- Product Weight (lb): 1.54
- Voltage DC: 40
- Warranty: 2-year
- Battery Type: Tabbed
- Accessories: BC1161
- Accessories: BL2010-BOOT
- For Use With: QXBD5PT20CPM16
- For Use With: QXBD5PT27CPM16
- For Use With: QXBD5PT40CPM16
- For Use With: QXFD5PT10CPM12
- For Use With: QXFD5PT13CPM16
- For Use With: QXFD5PT200PM12
- For Use With: QXFD5PT20CPM16
- For Use With: QXFD5PT27CPM16
- For Use With: QXFD5PT40CPM16
- For Use With: QXFD5PT500PM12
- For Use With: QXX2A52T0396PS12
- For Use With: QXX2A52T0594PS12
- For Use With: QXX5A45T0180PS12
- For Use With: QXX5A45T0270PS12
- For Use With: QXX5A52T0880PS12
- For Use With: QXX5A72T1080PS16
- For Use With: QXX5A72T1620PS16
- For Use With: QXXD2PT10CPM12
- For Use With: QXXD2PT10CPM12-K2
- For Use With: QXXD2PT200PM12
- For Use With: QXXD2PT200PM12-K2
- For Use With: QXXD2PT500PM12
- For Use With: QXXD2PT500PM12-K2
- For Use With: QXXD5PT01KPW16
- For Use With: QXXD5PT01KPW16K2
- For Use With: QXXD5PT10CPM12
- For Use With: QXXD5PT10CPM12K2
- For Use With: QXXD5PT13CPM16
- For Use With: QXXD5PT13CPM16K2
- For Use With: QXXD5PT200PM12
- For Use With: QXXD5PT200PM12K2
- For Use With: QXXD5PT20CPM16
- For Use With: QXXD5PT20CPM16K2
- For Use With: QXXD5PT27CPM16
- For Use With: QXXD5PT27CPM16K2
- For Use With: QXXD5PT40CPM16
- For Use With: QXXD5PT40CPM16K2
- For Use With: QXXD5PT500PM12
- For Use With: QXXD5PT500PM12K2
Lt-Dty Balancer, 0.9-2.2 Lb, 5.2ft Cbl
IR BLD1
Light Duty Ergonomic Tool Balancer, 0.9-2.2 lb Capacity, 5.2' Lift
Description: With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Product Application and Uses:
Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
- Includes: Balancer, Cable and Upper Suspension Shackle
- Cable Material: Stainless steel
- Capacity (lb): 0.88 - 2.20
- Color: Red
- Duty Rating: Light Duty
- Housing Material: Aluminum
- Lift (ft): 5.2
- Lock Mechanism: Non-Locking
- Product Length (in): 11.5
- Product Width (in): 4.4
- Product Height (in): 10.25
- Product Weight (lb): 1.6
- Reel Height (in): 11.1
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Special Features: Adjustable Capacity
- Special Features: Anti Friction Cable Guide
- Tension Adjustment: Rotation
- Warranty: 1-year
- For Use With: 1RLNS1
- For Use With: 1RPLS1
- For Use With: 1RPMS1
- For Use With: 1RPNS1
- For Use With: 1RPQS1
- For Use With: 7RAMC1
- For Use With: 7RAMC1-EU
Md-Dty Balancer, 13.2-17.6 Lb, 6.5ft Cbl
IR BMDS-8
Medium Duty Short Cable Spring Balancer, 13.2-17.6 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 13.2 - 17.6
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Height (in): 3.4
- Product Weight (lb): 5.5
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Md-Dty Balancer, 4.4-8.8 Lb, 6.5ft Cbl
IR BMDS-4
Medium Duty Short Cable Spring Balancer, 4.4-8.8 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 4.4 - 8.8
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Height (in): 4.1
- Product Weight (lb): 4.4
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Balancer Control Kit Inline Handle
IR BW-IH-KIT
Balancer Control Kit Inline Handle
Md-Dty Balancer, 8.8-13.2 Lb, 6.5ft Cbl
IR BMDS-6
Medium Duty Short Cable Spring Balancer, 8.8-13.2 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 8.8 - 13.2
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Weight (lb): 5.1
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Lt-Dty Balancer, 4.4-6.6 Lb, 5.2ft Cbl
IR BLD3
Light Duty Ergonomic Tool Balancer, 4.4-6.5 lb Capacity, 5.2' Lift
Description: With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Product Application and Uses:
Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
- Includes: Balancer, Cable and Upper Suspension Shackle
- Cable Material: Stainless steel
- Capacity (lb): 4.4 - 6.6
- Color: Red
- Duty Rating: Light Duty
- Housing Material: Aluminum
- Lift (ft): 5.2
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Clip
- Product Length (in): 11.5
- Product Width (in): 4.4
- Product Height (in): 10.25
- Product Weight (lb): 1.6
- Reel Height (in): 11.1
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Special Features: Adjustable Capacity
- Special Features: Anti Friction Cable Guide
- Tension Adjustment: Rotation
- Warranty: 1-year
Md-Dty Balancer, 2.2-5.5 Lb, 6.5ft Cbl
IR BMDS-2
Medium Duty Short Cable Spring Balancer, 1.0-2.5lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Screw-lock system that allows for re-beating and a higher level of reliability in a heavy-duty environments, on BMDS models only
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Cable Material: Stainless steel
- Capacity (lb): 2.2 - 5.5
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Height (in): 4.1
- Product Weight (lb): 4.4
- Reel Height (in): 13.78
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Md-Dty Balancer, 17.6-22 Lb, 8.2ft Cbl
IR BMDLN-10
Medium-Duty Long Spring Cable Balancer, 17.6-22 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 17.6 - 22
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Weight (lb): 7.5
- Reel Height (in): 15
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Md-Dty Balancer, 22-30 Lb, 8.2ft Cbl
IR BMDLN-12
Medium-Duty Long Spring Cable Balancer, 22-30 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless steel cable and anti-friction cable guide
- Adjustable capacity
- Adjustable stroke limiting device
- Upper suspension shackle included on balancer for ease of installation
- Axial Mounting Circlip to ensure greater durability
- Anti-reverse spanner adjustable bushing to protect the balancer from potential damages caused by an incorrect spring unloading
- Safety Cap added to the front of the balancer for greater durability by absorbing impact while in motion
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Cable Material: Stainless steel
- Capacity (lb): 22 - 30
- Color: Red
- Duty Rating: Medium Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Clip
- Product Length (in): 11.75
- Product Width (in): 5.75
- Product Weight (lb): 8.7
- Reel Height (in): 15
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Tension Adjustment: Front Screw with Spanner Wrench
- Warranty: 1-year
Lt-Dty Balancer, 2.2-4.4 Lb, 5.2ft Cbl
IR BLD2
Light Duty Ergonomic Tool Balancer, 2.2-4.4 lb Capacity, 5.2' Lift
Description: With more than 50 models to choose from, there's an Ingersoll-Rand balancer to satisfy virtually any balancing requirement. These balancers are ruggedly built of die cast aluminum for strength and reduced weight. They feature easy-to-use controls that allow for accurate spring adjustment.
Features And Benefits:
- Rugged construction, cast aluminum body
- Stainless-steel cable
- Adjustable capacity and stroke limiting device
- 4-sided 6-way adjustment knob for smoother response and better ergonomics
- Cable guide in anti-friction material
- Upper suspension shackle included on balancer for ease of installation
- Flat casing on the back of the balancer to make it easier to pack on rails
- New rope mouth bushing to help reduce wear and tear
Product Application and Uses:
Creates a gravity-free effect for tools to allow users to move tool with minimal effort along cable travel
- Includes: Balancer, Cable and Upper Suspension Shackle
- Cable Material: Stainless steel
- Capacity (lb): 2.2 - 4.4
- Color: Red
- Duty Rating: Light Duty
- Housing Material: Aluminum
- Lift (ft): 5.2
- Lock Mechanism: Non-Locking
- Product Length (in): 11.5
- Product Width (in): 4.4
- Product Height (in): 10.25
- Product Weight (lb): 1.6
- Reel Height (in): 11.1
- Reel Mount Type: Suspension Shackle
- Rotation Type: Fixed
- Special Features: Adjustable Capacity
- Special Features: Anti Friction Cable Guide
- Tension Adjustment: Rotation
- Warranty: 1-year
O-Ring (023446) Same
IR CE110-210
O-Ring Replacement Part for Ingersoll Rand 1702, 211, 212, 215G Series Impact Wrench
Hoist Assembly - 1/8 T
IR CL125K-2C10-C6
CL125K-2C10-C6 Air Hoist, 275 Lb Capacity, 10ft Lift, Pendant Control, Hook Mount
Designed for production applications and loads up to 1100 lbs. Exceptional durability with an ASME HST-5 rating of A5 (FEM/ISO mechanism classification of 1Am/M4) the CLK Series hoist are duty-rated to operate 800 full-load hours between overhauls.
Product Application/Uses:
Features and Benefits:
- Meets ASME HST-5 Specifications and OSHA requirements
- Rugged, lightweight and compact design
- Disc brake is non-asbestos and spring engaged with air release
- Internal muffler reduces sound levels to a best-in-the-industry 75 dBA
- High-strength aluminum housing for maximum portability and weather resistance. Strong yet lightweight with a durable powdercoated finish.
- Upper and lower limit stops prevent dangerous over-travel of the hook
- 100% duty cycle multi-vane (6) air motor offers a high-torque and low-maintenance design. Air porting under the vanes creates smooth operation, positive starting, and long life.
- Bottom latch-type swivel hooks meet OSHA requirements and are supported by anti-friction needle type thrust bearings.
- Ergonomic pendent handle is rugged and durable. Guard covers both levers and can be used with or without gloves.
Capacity (lb): 275
Lift (ft): 10
Nut Runner, Pistol Grip DC Electric
IR QE4PT025P10S06
Nut Runner, Pistol Grip DC Electric Nutrunner, Inline, DC, 10 Nm
IR QE4SC010B21S06
Nutrunner, Inline, DC, 10 Nm
Nutrunner, DC, Inline, 25 NM 3/8Dr
IR QE4SC025B41S06
Nutrunner, DC, Inline, 25 NM 3/8Dr
Qe4 Dc Fastening, Push-To-Start, 15 Nm
IR QE4TS015R11Q04
Qe4 Dc Fastening, Push-To-Start, 15 Nm
Qe4 Dc Fastening Push-To-Start, 25 Nm
IR QE4TS025R11S06
Qe4 Dc Fastening Push-To-Start, 25 Nm
R/A DC Electric, Nutrunner
IR QE6AT040PA4S08
R/A DC Electric, Nutrunner
Inline Nutrunner Trigger Start 3/8 sq dr 20nm
IR QE4ST020R21S06
Inline Nutrunner Trigger Start 3/8 sq dr 20nm
Nutrunner, DC, Inline, Trigger Start
IR QE4ST015B21S06
Nutrunner, DC, Inline, Trigger Start
Nutrunner, 55 NM, Right Angle, 1/2 Sq Dr
IR QE6AT055PA5S08
Nutrunner, 55 NM, Right Angle, 1/2 Sq Dr
Dc Driver, 1/2Dr Inline150Nm, 500Rpm
IR QE8SC150F61S08
Dc Driver, 1/2Dr Inline150Nm, 500Rpm
DC Electric Driver, 90nm, 1470 rpm
IR QE8SC090F61S08
DC Electric Driver, 90nm, 1470 rpm
Inline DC Electric Nutrunner, 3-12Nm, Push Start, 1/4Sq Dr
IR QE4TS015R11S04
Inline DC Electric Nutrunner, 3-12Nm, Push Start, 1/4Sq Dr
Dc Electric, Straight, 55Nm, 1/2In Drive
IR QE8SE055J41S08
Dc Electric, Straight, 55Nm, 1/2In Drive
Q Series Inline Nutrunner, 90Nm 150mm spindle
IR QE8ST090F61S08
Q Series Inline Nutrunner, 90Nm 150mm spindle
Inline, DC, 150 NM, 1/2 Sq Dr
IR QE8ST150F41S08
Inline, DC, 150 NM, 1/2 Sq Dr
Qm3 Dc Fastening Straight, Single Xducer, New Of
IR QM3SS020H62S06
Qm3 Dc Fastening Straight, Single Xducer, New Of
Qm Series, 55Nm, 1/2In Dr, Remote Start.
IR QM5SS055L62S08
Qm Series, 55Nm, 1/2In Dr, Remote Start.
Assembly Tool Qm5Ss090H62S08
IR QM5SS090H62S08
Assembly Tool Qm5Ss090H62S08
Nutrunner, 190NM, 9In Spindle, 3/4 SQ Dr
IR QM7SS190L92S12
Nutrunner, 190NM, 9In Spindle, 3/4 SQ Dr
DC Electric Inline Nutrunner
IR QM9SS01KH62S16
DC Electric Inline Nutrunner
Assembly Tool Qm9Ss650H62S16
IR QM9SS650H62S16
Assembly Tool Qm9Ss650H62S16
Pistol Shutoff Pulsetool With 1/2" Sq Dr
IR QS140P4
Pistol Shutoff Pulsetool With 1/2" Sq Dr
Torque Arm Assy, 10Nm
IR QTA010
Bench-mounted Torque Reaction Arm, 10 NM Capacity, 15" Max Working Reach, 13" Vertical Travel, 2.6 LB Weight Capacity, 27.8" H
Description: Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.
Features And Benefits:
- Spring balancer adjusts easily and offers effortless vertical movement.
- Simple, proven design for trouble-free setup and dependability.
- Anodized aluminum body delivers toughness in a lightweight design.
- Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
- Adjustable reach for easy use and convenience when locating fasteners.
- Multiple-tool holder options include right angle, swivel, and pistol grip.
- Cable or air line clamps keep work area clear and organized.
- Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
- Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.
Product Application and Uses:
For use with assembly tools.
- Includes: tool holder and spring balancer
- For Use With: 1RPNC1
- For Use With: 41PP10TSQ4
- For Use With: 41PP17TSQ4
Pistol Shutoff Pulsetool With 1/2" Sq Dr
IR QS110P4
Pistol Shutoff Pulsetool With 1/2" Sq Dr
Shut Off Pulse Tool-3/8"Sq Drive Qs70P3
IR QS70P3
Shut Off Pulse Tool-3/8"Sq Drive Qs70P3
Shutoff Pulse Tool W/3/4"Square Drive
IR QS150P6
Shutoff Pulse Tool W/3/4"Square Drive
Torque Arm Assy, 20Nm
IR QTA020
Bench-mounted Torque Reaction Arm, 20" Max Reach, 20 NM Torque, 14.5" Vertical Travel Distance, 5LB Weight Capacity, 31.8" H
Description: Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.
Features And Benefits:
- Spring balancer adjusts easily and offers effortless vertical movement.
- Simple, proven design for trouble-free setup and dependability.
- Anodized aluminum body delivers toughness in a lightweight design.
- Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
- Adjustable reach for easy use and convenience when locating fasteners.
- Multiple-tool holder options include right angle, swivel, and pistol grip.
- Cable or air line clamps keep work area clear and organized.
- Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
- Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.
Product Application and Uses:
For use with assembly tools.
- Includes: tool holder and spring balancer
Shut Off Pulse Tool -1/4in Hex Drive
IR QS70PQ1
Shut Off Pulse Tool -1/4in Hex Drive
Pistol Shutoff Pulsetool 1/2" Square Drive
IR QS120P4
Pistol Shutoff Pulsetool 1/2" Square Drive
Torque Arm Assy, 100Nm
IR QTA100
Bench-mounted Torque Reaction Arm, 52" Max Reach, 100 NM Torque, 22" Vertical Travel Distance, 10 lb Capacity, 78.7" H
Description: Ingersoll Rand QTA Series bench-mounted torque reaction arms are constructed of lightweight aluminum. They include an Ingersoll Rand spring-loaded, die-cast aluminum balancer for impressive strength and reduced weight.
Features And Benefits:
- Spring balancer adjusts easily and offers effortless vertical movement.
- Simple, proven design for trouble-free setup and dependability.
- Anodized aluminum body delivers toughness in a lightweight design.
- Chrome-plated pole paired with a self-lubricating bearing, provides unmatched durability.
- Adjustable reach for easy use and convenience when locating fasteners.
- Multiple-tool holder options include right angle, swivel, and pistol grip.
- Cable or air line clamps keep work area clear and organized.
- Custom tool holder options enable seamless integration with Ingersoll Rand QA and QE tools.
- Position arm at 90-degree angle for optimum torque reaction performance. Arm should not be used in fully extended or fully collapsed position as this reduces reaction capabilities.
Product Application and Uses:
For use with assembly tools.
- Includes: tool holder and spring balancer