IR 2850-K303

IR 2850MAX

1" Air Impact Wrench, 2100 ft-lb Torque, Friction Ring-Thru-hole Retainer, D-handle Inside Trigger

Description: The 2850MAX 1" D-handle Impact Wrench, our fiercest 1" wrench, engineered to make quick work of big jobs like semi, bus and tractor tires. This tool has been made lighter, pushed harder and worked longer to make sure it can handle repeated demands without sacrificing power. Every time you need extreme torque, this lightweight boss can get the job done.

Features And Benefits:

• Solid steel impact mechanism: Deliver 2,100 ft.-lbs. of torque.
• Chemical resistant housing & steel core: Stands up to drops and harsh work environments.
• Lightweight: Weighs under 20 lbs. and is 25% lighter than the industry's leading 1" wrench.
• 360 degree adjustable handle: The side handle rotates fully around the tool as the job demands.
• Swivel hose connection: Keeps cords from getting tangled so you can move freely around the garage.

Product Application and Uses:

Vehicle Repair, General Industrial, Facility Maintenance

• Includes: Bare Tool
• Actuation/Throttle Type/Switch Type: Inside Trigger
• Air Consumption @ Load (cfm): 56
• Air Consumption @ Load (l/min): 1587
• Air Inlet: 1/2in NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 14
• Average Air Consumption (l/min): 397

• Blows per Min: 770

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Maintenance Duty

• End Plates: Aluminum with Steel Wear Plate
• Exhaust Location: Top
• Free Speed Sound Pressure/Power Db(A): 105.0 / 116.0

• Hammer Case: Steel
• Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 96.7 / 107.7

• Max Bolt Diameter (in): 1-1/4
• Max Free Speed (rpm): 5500
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 2102
• Max Torque (in-lb): 25225
• Max Torque (nm): 2850
• Min Hose Size (in): 3/4
• Motor: Reverse Bias

• Number of Power Settings: 3
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 108.2
• Product Length (in): 13.1

• Product Width (in): 6.5
• Product Height (in): 9
• Product Weight (lb): 19.43
• Recommended Forward Torque Range (ft-lb): 2002
• Recommended Forward Torque Range (in-lb): 24030
• Recommended Forward Torque Range (nm): 2715
• Retainer Type: Friction Ring and Thru-hole

• Side to Center Distance (in): 3.3
• Side to Center Distance (mm): 84

• Special Features: 2-Year Max warranty
• Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744

• Tool Type: Full-size
• Vanes: 7
• Vibration Level (m/s2): 12.6
• Warranty: 2-year

• Accessories: SK8H9TN
• Accessories: SK8M4LN
• Accessories: TB3

• Lubrication: 105-LBK1
• Lubrication: 10G
• Lubrication: 10P
• Lubrication: 10Z4
• Parts: 2850-A626
• Parts: 2850MAX-TK1

IR 2850MAX-6

1" Air Impact Wrench, 6" Ext Anvil, 2100 ft-lb Torque, Friction Ring-Thru-hole Retainer, D-handle Inside Trigger

Description: The 2850MAX 1" D-handle 6 inch extended anvil Impact Wrench, our fiercest 1" wrench, engineered to make quick work of big jobs like semi, bus and tractor tires. This tool has been made lighter, pushed harder and worked longer to make sure it can handle repeated demands without sacrificing power. Every time you need extreme torque, this lightweight boss can get the job done.

Features And Benefits:

• Solid steel impact mechanism: Deliver 2,100 ft- lbs of torque
• Chemical resistant housing & steel core: Stands up to drops and harsh work environments
• Lightweight: Weighs under 20 lbs. and is 25% lighter than the industry's leading 1" wrench.
• 360 degree adjustable handle: The side handle rotates fully around the tool as the job demands
• Swivel hose connection: Keeps cords from getting tangled so you can move freely around the garage
• 6" anvil extension: Increases accessibility in hard to reach places

Product Application and Uses:

Vehicle Repair, General Industrial, Facility Maintenance

• Includes: Bare Tool
• Actuation/Throttle Type/Switch Type: Inside Trigger
• Air Consumption @ Load (cfm): 56
• Air Consumption @ Load (l/min): 1587
• Air Inlet: 1/2in NPT
• Air Pressure (psi): 90
• Anvil Length: 6" Extended
• Average Air Consumption (cfm): 14
• Average Air Consumption (l/min): 397

• Blows per Min: 770

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Maintenance Duty

• End Plates: Aluminum with Steel Wear Plate
• Exhaust Location: Top
• Free Speed Sound Pressure/Power Db(A): 105.0 / 116.0

• Hammer Case: Steel
• Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 96.7 / 107.7

• Max Bolt Diameter (in): 1-1/4
• Max Free Speed (rpm): 5500
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 2102
• Max Torque (in-lb): 25225
• Max Torque (nm): 2850
• Min Hose Size (in): 3/4
• Motor: Reverse Bias

• Number of Power Settings: 3
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 97.2
• Product Length (in): 19.1

• Product Width (in): 9.5
• Product Height (in): 6.5
• Product Weight (lb): 21.58
• Recommended Forward Torque Range (ft-lb): 2002
• Recommended Forward Torque Range (in-lb): 24030
• Recommended Forward Torque Range (nm): 2715
• Retainer Type: Friction Ring and Thru-hole

• Side to Center Distance (in): 4.8
• Side to Center Distance (mm): 122

• Special Features: 2-year Max warranty
• Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744

• Tool Type: Full-size
• Vanes: 7
• Vibration Level (m/s2): 10.3
• Warranty: 2-year

• Accessories: SK8H9TN
• Accessories: TB3

• Lubrication: 105-LBK1
• Lubrication: 10G
• Lubrication: 10P
• Lubrication: 10Z4
• Parts: 2850-A626-6
• Parts: 2850MAX-TK1

IR 2850MAX-TK1

Tune-up Kit for Ingersoll Rand 2850MAX Series Impact Wrench

• Includes: inlet parts kit, spring pins (3), reverse valve O-ring, gasket handle, retaining ring, ball bearing cylinder, exhaust defuser, cylinder dowel, vane pack (7), ball bearing end plate, hammer case gasket, socket retaining kit

• For Use With: 2850MAX
• For Use With: 2850MAX-6

IR 2850-THK1

IR 285B

1" Air Impact Wrench, Heavy Duty, 1475 ft-lb Torque, Friction Ring -Thru-hole Retainer, D-handle Inside Trigger

Description: The 285B combine exceptional power, control and durability. It delivers 1770 ft-lb of maximum torque @ 120 psi, with 5,250 rpm free speed and a high-efficiency, 6-vane motor. The swept-back 285B handle provides excellent maneuverability. The 285B 6-inch extended anvil makes changing tires and deeper fastening will be a breeze.

Features And Benefits:

• Power: The rocking dog's combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself.
• Professional Use: Designed for the professional with over 1770 ft.-lbs. of torque for the toughest applications.
• Reliability: Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions.
• Durable and Resistant: Phenolic 6 vane motor resist harsh environments for less downtime on the job. A protective rubber boot shields the tool from exterior damage.
• Control: Feather Touch trigger and 3 position power regulator in both forward and reverse. Ergonomic swept-back handle provides excellent maneuverability.
• Speed: The impact wrench has a free speed of 5,250 rpm.
• Optimized: Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO. 1-year warranty.

Product Application and Uses:

Vehicle Repair, General Industrial, Facility Maintenance

• Actuation/Throttle Type/Switch Type: Inside Trigger
• Actuation/Throttle Type/Switch Type: Feather-touch Trigger
• Air Consumption @ Load (cfm): 61
• Air Consumption @ Load (l/min): 1727
• Air Inlet: 1/2" NPT
• Air Pressure (psi): 120
• Anvil Length: Standard
• Average Air Consumption (cfm): 10
• Average Air Consumption (l/min): 283

• Blows per Min: 830

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Heavy Duty

• End Plates: Cast Iron
• Exhaust Location: Bottom

• Hammer Case: Aluminum
• Housing Material: Aluminum core with composite sleeve
• Impact Mechanism: Rocking Dog

• Max Bolt Diameter (in): 1-1/4
• Max Free Speed (rpm): 5250
• Max Torque (ft-lb): 1770
• Max Torque (in-lb): 21242
• Max Torque (nm): 2400
• Min Hose Size (in): 3/4
• Motor: Non-Biased

• Number of Power Settings: 3
• Power Source: Air Powered
• Product Length (in): 13.2

• Product Width (in): 9.1
• Product Height (in): 7.2
• Product Weight (lb): 24.6
• Recommended Forward Torque Range (ft-lb): 120-1080
• Recommended Forward Torque Range (in-lb): 1443-12957
• Recommended Forward Torque Range (nm): 163-1464
• Retainer Type: Friction Ring and Thru-hole

• Sound Pressure/Power Db(A): 107/118
• Speed Setting: Variable Speed

• Tool Type: Full-size
• Vanes: 6
• Vibration Level (m/s2): 16.5
• Vibration Uncertainy K* (m/s2): 3.4
• Warranty: 1-year

• Accessories: 285-BOOT
• Accessories: SK8H9TN

• Lubrication: 105-LBK1
• Lubrication: 10G
• Lubrication: 10P
• Lubrication: 10Z4
• Parts: 285B-283
• Parts: 285B-302

• Parts: 285B-333

IR 285B-11

IR 285B-283

Handle Gasket for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-302

Throttle Valve Plunger for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-333

Ball for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-36

Hammer Case Gasket for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-334

Spring Replacement Part for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-50

Throttle Valve for Ingersoll Rand 285B Series Air Impact Wrench

Description: For Use with Ingersoll Rand 285B Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-566

O-Ring for Ingersoll Rand Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-51

Throttle Valve Spring for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-6

1" Air Impact Wrench, 6" Ext Anvil, Heavy Duty, 1770 ft-lb Torque, Friction Ring-Thru-hole Retainer, D-handle Inside Trigger

Description: The 285B combine exceptional power, control and durability. It delivers 1770 ft-lb of maximum torque @ 120 psi, with 5,250 rpm free speed and a high-efficiency, 6-vane motor. The swept-back 285B handle provides excellent maneuverability. The 285B 6-inch extended anvil makes changing tires and deeper fastening will be a breeze.

Features And Benefits:

• Power: The rocking dog's combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself.
• Professional Use: Designed for the professional with over 1770 ft.-lbs. of torque for the toughest applications.
• Reliability: Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions.
• Durable and Resistant: Phenolic 6 vane motor resist harsh environments for less downtime on the job. A protective rubber boot shields the tool from exterior damage.
• Reach: With Multiple retention methods and a 6-inch extended anvil you access hard-to-reach spaces, while maintaining a strong connection to the socket.
• Control: Feather Touch trigger and 3 position power regulator in both forward and reverse. Ergonomic swept-back handle provides excellent maneuverability.
• Speed: The impact wrench has a free speed of 5,250 rpm.
• Optimized: Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO. 1-year warranty.

Product Application and Uses:

Vehicle Repair, General Industrial, Facility Maintenance

• Actuation/Throttle Type/Switch Type: Inside Trigger
• Actuation/Throttle Type/Switch Type: Feather-touch Trigger
• Air Consumption @ Load (cfm): 61
• Air Consumption @ Load (l/min): 1727
• Air Inlet: 1/2" NPT
• Air Pressure (psi): 120
• Anvil Length: 6" Extended
• Average Air Consumption (cfm): 10
• Average Air Consumption (l/min): 283

• Blows per Min: 830

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Heavy Duty

• End Plates: Cast Iron
• Exhaust Location: Bottom

• Hammer Case: Aluminum
• Housing Material: Aluminum core with composite sleeve
• Impact Mechanism: Rocking Dog

• Max Bolt Diameter (in): 1-1/4
• Max Free Speed (rpm): 5250
• Max Torque (ft-lb): 1770
• Max Torque (in-lb): 21242
• Max Torque (nm): 2400
• Min Hose Size (in): 3/4
• Motor: Non-Biased

• Number of Power Settings: 3
• Power Source: Air Powered
• Product Length (in): 20.43

• Product Width (in): 7.94
• Product Height (in): 7.18
• Product Weight (lb): 27.8
• Recommended Forward Torque Range (ft-lb): 120-1080
• Recommended Forward Torque Range (in-lb): 1443-12957
• Recommended Forward Torque Range (nm): 163-1464
• Retainer Type: Friction Ring and Thru-hole

• Side to Center Distance (in): 4.1
• Side to Center Distance (mm): 104

• Sound Pressure/Power Db(A): 107/118
• Speed Setting: Variable Speed
• Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744

• Tool Type: Full-size
• Vanes: 6
• Vibration Level (m/s2): 13.3
• Vibration Uncertainy K*

IR 285B-641

IR 285B-93A

Trigger for Ingersoll Rand 285B Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-724

IR 285B-A12

IR 285B-A329

Reverse Valve for Ingersoll Rand 285B Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-A48

IR 285B-A48-6

Angled Dead Handle for Ingersoll Rand 285B Air Impact Wrenches

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• Includes: Dead handle with screws

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-A526-6

6" Extended #5 Spline Service Par for Ingersoll Rand 285B-S6 Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B-S6 Air Impact Wrench.

• For Use With: 285B-S6

IR 285B-A565

Inlet Bushing Assembly for Ingersoll Rand 285B Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-A638

IR 285B-A726

Anvil Assembly for Ingersoll Rand 295A & 285B Standard Length Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B and 295A standard anvil air impact wrench.

• For Use With: 285B
• For Use With: 295A

IR 285B-A726-6

6" Extended Anvil Assembly for Ingersoll Rand 285B-6 Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B-6 6" Extended Impact Wrench

• For Use With: 285B-6
• For Use With: 285B-6-AP

IR 285B-A727

IR 285B-A92A

Trigger Handle Assembly for Ingersoll Rand 285B Impact Wrench

Product Application and Uses:

For use with 285B Series Impact Wrench (285B, 285B-6, 285B-S6, 285B-6-AP)

• Includes: Trigger, Slot Cover, Name Plate and (4) Rivets, Stop Pin, Spring Pin

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 285B-S-557

O-Ring for Ingersoll Rand Series Air Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• For Use With: 285B-S6

IR 285B-K727-6

Hammer Case Replacement Kit for Ingersoll Rand 285B Series Air Impact Wrench

IR 285B-S6

No. 5 Spline Air Impact Wrench, 6" Ext Anvil, 1770 ft-lb Torque, D-Handle Inside Trigger

Description: The 285B Series Impact Wrench combines exceptional power, control and durability is great for any garage. They deliver 1,770 ft-lb of maximum torque @ 120 psi, with 5,250 rpm free speed and a high-efficiency, 6-vane motor. The swept-back 285B handle provides excellent maneuverability.

Features And Benefits:

• Power: The rocking dog's combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself.
• Professional Use: Designed for the professional with over 1770 ft.-lbs. of torque for the toughest applications.
• Reliability: Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions.
• Durable and Resistant: Phenolic 6 vane motor resist harsh environments for less downtime on the job. A protective rubber boot shields the tool from exterior damage.
• Reach: With Multiple retention methods and a 6-inch extended anvil you access hard-to-reach spaces, while maintaining a strong connection to the socket.
• Control: Feather Touch trigger and 3 position power regulator in both forward and reverse. Ergonomic swept-back handle provides excellent maneuverability.
• Speed: The impact wrench has a free speed of 5,250 rpm.
• Optimized: Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO. 1-year warranty.

Product Application and Uses:

Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO

• Actuation/Throttle Type/Switch Type: Inside Trigger
• Actuation/Throttle Type/Switch Type: Feather-touch Trigger
• Air Consumption @ Load (cfm): 61
• Air Consumption @ Load (l/min): 1727
• Air Inlet: 1/2" NPT
• Air Pressure (psi): 120
• Anvil Length: 6" Extended
• Average Air Consumption (cfm): 10
• Average Air Consumption (l/min): 283

• Blows per Min: 830

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): No. 5
• Drive Type: Spline
• Duty Rating: Heavy Duty

• End Plates: Cast Iron
• Exhaust Location: Bottom

• Hammer Case: Aluminum
• Housing Material: Aluminum core with composite sleeve
• Impact Mechanism: Rocking Dog

• Max Bolt Diameter (in): 1-1/4
• Max Free Speed (rpm): 5250
• Max Torque (ft-lb): 1770
• Max Torque (in-lb): 21242
• Max Torque (nm): 2400
• Min Hose Size (in): 3/4
• Motor: Non-Biased

• Number of Power Settings: 3
• Power Source: Air Powered
• Product Length (in): 20.1

• Product Width (in): 8.1
• Product Height (in): 7.2
• Product Weight (lb): 27.8
• Recommended Forward Torque Range (ft-lb): 120-1080
• Recommended Forward Torque Range (in-lb): 1443-12957
• Recommended Forward Torque Range (nm): 163-1464
• Retainer Type: Friction Ring

• Sound Pressure/Power Db(A): 107/118
• Speed Setting: Variable Speed
• Standards/Certifications: CE

• Tool Type: Full-size
• Vanes: 6
• Vibration Level (m/s2): 13.3
• Vibration Uncertainy K* (m/s2): 2.1
• Warranty: 1-year

• Accessories: 285-BOOT

• Lubrication: 105-LBK1
• Lubrication: 10G
• Lubrication: 10P
• Lubrica

IR 285B-TK1

Tune-up Kit for Ingersoll Rand 285B Series Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 285B Series Air Impact Wrench.

• Includes: Slot cover, Throttle Valve Plunger, Throttle Valve, Throttle Valve Spring, (2) O-rings, Stop Pin, Spring, Ball, Reverse Valve Seal, Spring Pin, Handle Gasket, Hammer Case Gasket, Front Rotor Bearing, Rear Rotor Bearing, Vane Pack (set of 6), Retainer Ring, Oil Seal

• For Use With: 285B
• For Use With: 285B-6
• For Use With: 285B-6-AP
• For Use With: 285B-S6

IR 28696

IR 2902-A727

IR 2902P-A40

IR 2904P-TK2

IR 2906P1

1/2" Air Impact Wrench, Super Duty, 500 ft-lb Torque, Pin Retainer, Pistol

Description: This heavy duty impact wrench has your back. This tool is safe, reliable and always ready to perform at its peak.

Features And Benefits:

• Durability: The 2906P1 Impact Wrench was built to last. Thanks to its steel hammer case and metal housing, this tool will work after multiple drops and harsh weather conditions.
• Power: Finely tuned twin hammer impact mechanism and a reverse bias motor delivers 500 ft-lbs. of max. torque, and 1200 blows per minute.
• Increased Safety: The square pin drive ensures provides the strongest connection to the socket to increase safety.

Product Application and Uses:

Heavy Industry, Oil&Gas, Foundry

• Includes: Bare Tool
• Actuation/Throttle Type/Switch Type: Trigger
• Air Inlet: 1/4" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 23
• Average Air Consumption (l/min): 651

• Blows per Min: 1200

• Color: Grey
• Configuration/Handle Type: Pistol Grip
• Drive Size (in): 1/2
• Drive Type: Square
• Duty Rating: Super Duty

• End Plates: Steel
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 84.2 / 95.2

• Hammer Case: Steel
• Housing Material: Aluminum
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 86.0 / 97.0

• Max Bolt Diameter (in): 9/16
• Max Free Speed (rpm): 5000
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 500
• Max Torque (in-lb): 6001
• Max Torque (nm): 678
• Min Hose Size (in): 3/8
• Motor: Non-Biased

• Number of Power Settings: 6
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 83.3
• Product Length (in): 6.88

• Product Width (in): 8.82
• Product Height (in): 3.39
• Product Weight (lb): 6
• Recommended Forward Torque Range (ft-lb): 40-350
• Recommended Forward Torque Range (in-lb): 480-4204
• Recommended Forward Torque Range (nm): 54.2-475
• Recommended Reverse Torque (ft-lb): 40-350
• Recommended Reverse Torque (nm): 54.2-475
• Retainer Type: Pin Detent

• Side to Center Distance (in): 4.4
• Side to Center Distance (mm): 112

• Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744

• Tool Type: Full-size
• Vanes: 6
• Vibration Level (m/s2): 7.6
• Warranty: 1-year

• Accessories: S64H1316L-PS1
• Accessories: S64H1516L-PS1
• Accessories: S64H34L-PS1
• Accessories: S64H78L-PS1
• Accessories: S64M17L-PS1
• Accessories: S64M18L-PS1
• Accessories: S64M21L-PS1
• Accessories: S64M22L-PS1
• Accessories: S64M24L-PS1
• Accessories: S64M26L-PS1
• Accessories: SK4H13N

• Lubrication: 105-LBK1
• Lubrication: 10G
• Lubrication: 10P
• Lubrication: 10Z4
• Parts: 2906P-TK1

IR 2902-36

IR 2920-3

IR 2920-641

IR 2921-302

Throttle Valve for Ingersoll Rand Air Impact Wrenches

Product Application and Uses:

For use with Ingersoll Rand 2925, 2921, 2920, 271, 261, 259, 2190, 2171, 2161, 1720P Series Impact Wrenches

IR 2910-704

IR 2921HP-11

IR 2934-140

IR 2920P-TK2

Tune-Up Kit For Ingersoll Rand Power Tools

IR 2922P1

3/4" Air Impact Wrench, Super Duty, 2000 ft-lb Torque, Friction Ring and Thru-hole Retainer, Pistol

Description: Ingersoll Rand's 2922 Series 3/4" Air Impact Wrenches are making their impact on the industry by combining top-of-the-line performance and power at an attainable price point. The 2,000 ft-lbs. of nut-busting torque and 1,450 ft-lbs. of max breakaway torque allow you to quickly take on your toughest jobs with ease, while the pressure feed lubrication ensures better distribution throughout the mechanism to improve the life of your tool. Even the harshest environments are no match for the durable construction of this all-metal masterpiece.

Features And Benefits:

• Power: Best-in-class raw power and power to weight ratio means you'll always be prepared with the power necessary to perform any task. 2,000 ft-lbs. of Nut Busting Torque and 1,450 ft-lbs. of breakaway torque promises premium power from every angle.
• Durability: Features a steel hammer case and metal housing that'll withstand harsh conditions and drops. Pressure Feed Lubrication ensures better distribution throughout the mechanism to improve tool life.
• Versatility: Equipped with a combo friction ring and thru hole anvil for more socket applications, the versatility of the Industrial Impacts knows no bounds.

Product Application and Uses:

Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding.

• Actuation/Throttle Type/Switch Type: Trigger
• Air Consumption @ Free Speed (cfm): 148
• Air Consumption @ Free Speed (l/min): 4188
• Air Consumption @ Load (cfm): 98
• Air Consumption @ Load (l/min): 2773
• Air Inlet: 3/8" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 25
• Average Air Consumption (l/min): 693

• Blows per Min: 1050

• Color: Grey
• Configuration/Handle Type: Pistol Grip
• Drive Size (in): 3/4
• Drive Type: Square
• Duty Rating: Super Duty

• End Plates: Steel
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 99.6 / 110.6

• Hammer Case: Steel
• Handle Material: Aluminum
• Housing Material: Aluminum
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 95.9 / 106.9

• Max Bolt Diameter (in): 1.125
• Max Free Speed (rpm): 5200
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 1450
• Max Torque (in-lb): 17401
• Max Torque (nm): 1966
• Min Hose Size (in): 1/2
• Motor: Non-Biased

• Number of Power Settings: 3
• Nut-busting/Breakaway Torque (ft-lb): 2000
• Nut-busting/Breakaway Torque (in-lb): 23986
• Nut-busting/Breakaway Torque (nm): 2710
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 166
• Product Length (in): 8.9

• Product Width (in): 3.5
• Product Height (in): 9.6
• Product Weight (lb): 12
• Recommended Forward Torque Range (ft-lb): 350-1100
• Recommended Forward Torque Range (in-lb): 4204-13205
• Recommended Forward Torque Range (nm): 475-1492
• Recommended Reverse Torque (ft-lb): 350-1100
• Recommended Reverse Torque (nm): 475-1492
• Retainer Type: Friction Ring and Thru-hole

• Side to Center Distance (in): 1.75
• Side to Center Distance (mm): 44

• Standards/Certifications: <

IR 2910-42-6

IR 2910-826

1" Anvil Service Part for Ingersoll Rand Impact Wrench

• For Use With: 2925RBP3TI

IR 2925-A3

IR 2925-TK2

Tune-Up Kit for Ingersoll Rand 2925 Series Impact Wrench

• Includes: (1) Vane pack, (1) Spring (1) Front Rotor Bearing, (1) Rear Rotor Bearing, (2) Gasket, (2) O-Ring, (1) Throttle Valve Seat, (1) Throttle Valve, (1) Inlet Screen, (1) Seal, (1) Muffler

IR 2920B-800

IR 2925-42-7

Vane Pack (set of 7) Service Part for Ingersoll Rand 2925 Series Impact Wrenches

• For Use With: 2925P1TI
• For Use With: 2925RBP3TI

IR 2934-124

IR 2925B2TI

1" Air Impact Wrench, 1600 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-handle Inside Trigger

Features And Benefits:

• Durability: Thanks to a titanium hammer case, this wrench is both lightweight and durable.
• Reliability: The twin hammer impact mechanism means it's less sensitive to air pressure fluctuation, which means you never have to worry about your location affecting your wrench's effectiveness.
• Bronze endplates and a corrosion preventative treatment prevents internal in outdoor, wet environments.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool.
• Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding.
• Integral muffler.

• Actuation/Throttle Type/Switch Type: Inside Trigger
• Air Consumption @ Load (cfm): 60
• Air Consumption @ Load (l/min): 1699
• Air Inlet: 3/8" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 12
• Average Air Consumption (l/min): 340

• Blows per Min: 900

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square

• End Plates: Bronze
• Free Speed Sound Pressure/Power Db(A): 99.6 / 110.6

• Hammer Case: Titanium
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 95.9 / 106.9

• Max Free Speed (rpm): 6500
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 1497
• Max Torque (in-lb): 17967
• Max Torque (nm): 2030
• Min Hose Size (in): 1/2
• Motor: Non-Biased

• Power Source: Air Powered
• Product Length (in): 13.3

• Product Height (in): 10.9
• Product Weight (lb): 15.2
• Recommended Forward Torque Range (ft-lb): 1298
• Recommended Forward Torque Range (in-lb): 15577
• Recommended Forward Torque Range (nm): 1760
• Retainer Type: Thru-hole

• Special Features: Titanium hammercase

• Vibration Level (m/s2): 9.8
• Warranty: 1-year

• Parts: 834-61

IR 2922P3

1" Air Impact Wrench, Super Duty, 2000 ft-lb Torque, Friction Ring-Thru-hole Retainer, Pistol

Description: Ingersoll Rand's 2922 Series 1" Air Impact Wrenches are making their impact on the industry by combining top-of-the-line performance and power at an attainable price point. The 2,000 ft-lbs. of nut-busting torque and 1,450 ft-lbs. of max breakaway torque allow you to quickly take on your toughest jobs with ease, while the pressure feed lubrication ensures better distribution throughout the mechanism to improve the life of your tool. Even the harshest environments are no match for the durable construction of this all-metal masterpiece.

Features And Benefits:

• Power: Best-in-class raw power and power to weight ratio means you'll always be prepared with the power necessary to perform any task. 2,000 ft-lbs. of Nut Busting Torque and 1,450 ft-lbs. of breakaway torque promises premium power from every angle.
• Versatility: Equipped with a combo friction ring and thru hole anvil for more socket applications, the versatility of the Industrial Impacts knows no bounds.
• Durability: Features a steel hammer case and metal housing that'll withstand harsh conditions and drops. Pressure Feed Lubrication ensures better distribution throughout the mechanism to improve tool life.

Product Application and Uses:

Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding.

• Actuation/Throttle Type/Switch Type: Trigger
• Air Consumption @ Free Speed (cfm): 148
• Air Consumption @ Free Speed (l/min): 4188
• Air Consumption @ Load (cfm): 98
• Air Consumption @ Load (l/min): 2773
• Air Inlet: 3/8" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 25
• Average Air Consumption (l/min): 693

• Blows per Min: 1050

• Color: Grey
• Configuration/Handle Type: Pistol Grip
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Super Duty

• End Plates: Steel
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 99.6 / 110.6

• Hammer Case: Steel
• Handle Material: Aluminum
• Housing Material: Aluminum
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 95.9 / 106.9

• Max Bolt Diameter (in): 1.125
• Max Free Speed (rpm): 5200
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 1450
• Max Torque (in-lb): 17401
• Max Torque (nm): 1966
• Min Hose Size (in): 1/2
• Motor: Non-Biased

• Number of Power Settings: 3
• Nut-busting/Breakaway Torque (ft-lb): 2000
• Nut-busting/Breakaway Torque (in-lb): 23986
• Nut-busting/Breakaway Torque (nm): 2710
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 166
• Product Length (in): 8.9

• Product Width (in): 3.5
• Product Height (in): 9.6
• Product Weight (lb): 12
• Recommended Forward Torque Range (ft-lb): 350-1100
• Recommended Forward Torque Range (in-lb): 4204-13205
• Recommended Forward Torque Range (nm): 475-1492
• Recommended Reverse Torque (ft-lb): 350-1100
• Recommended Reverse Torque (nm): 475-1492
• Retainer Type: Friction Ring and Thru-hole

• Side to Center Distance (in): 1.75
• Side to Center Distance (mm): 44

• Standards/Certifications: CE

IR 2910-726

3/4" Square Drive Anvil for Ingersoll Rand Impact Wrenches

• For Use With: 2925P1TI
• For Use With: 2925RBP1TI
• For Use With: 2925RBP1TIEX

IR 2925-638

IR 2920-74

IR 2920P-465

Inlet Bushing for Ingersoll Rand 259, 261, 271, 1720P Series Impact Wrench

• For Use With: 1720P1
• For Use With: 1720P3
• For Use With: 259
• For Use With: 261
• For Use With: 261-3
• For Use With: 261-6
• For Use With: 271

IR 2910B-364

IR 2925-703

IR 2925-658

IR 2934-23A

IR 2934-207

IR 2934-302

IR 2934-364

IR 2934-42-7

Vane Pack Service Part for Ingersoll Rand Power Tools, QTY 7

IR 2934-641

IR 2934-658A

IR 2934-726

IR 2934B9

1" Air Impact Wrench, Super Duty, 750 ft-lb Torque, Thru-hole Retainer, D-Handle Inside Trigger

Description: The twin hammer impact mechanism ensures this series is reliable, durable, and will produce the same output every time.

Features And Benefits:

• Durability: This Series features an iron hammer case and metal housing that'll withstand harsh conditions and drops.
• Reliability: Resistant to fluctuations in air pressures, this series will work just as well in any condition. Comes with a 1-year warranty.
• Great for Outdoor Environments: This wrench contains a bronze end-plate that increases durability and is corrosion resistant.

Product Application and Uses:

Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding

• Actuation/Throttle Type/Switch Type: Inside Trigger
• Air Inlet: 1/2" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 47
• Average Air Consumption (l/min): 1331

• Blows per Min: 780

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Super Duty

• End Plates: Bronze
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 93.2 / 104.2

• Handle Material: Composite
• Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 94.5 / 105.5

• Max Bolt Diameter (in): 1.125
• Max Free Speed (rpm): 5300
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 750
• Max Torque (in-lb): 9001
• Max Torque (nm): 1017
• Min Hose Size (in): 3/4
• Motor: Non-Biased

• Number of Power Settings: Continuous
• Power Source: Air Powered
• Product Length (in): 18.63

• Product Width (in): 4.4
• Product Height (in): 6.7
• Product Weight (lb): 35.75
• Recommended Forward Torque Range (ft-lb): 500-656
• Recommended Forward Torque Range (in-lb): 6001-7877
• Recommended Forward Torque Range (nm): 678-890
• Recommended Reverse Torque (ft-lb): 500-656
• Recommended Reverse Torque (nm): 678-890
• Retainer Type: Thru-hole

• Side to Center Distance (in): 1.63
• Side to Center Distance (mm): 41

• Speed Setting: Variable Speed
• Standards/Certifications: CE

• Tool Type: Full-size
• Vanes: 6
• Vibration Level (m/s2): 30.8
• Warranty: 1-year

• Lubrication: 10P
• Parts: 2934-42-6
• Parts: 2934-A827

• Parts: 2934-TK3

IR 2934P-A50

IR 2934SP-A92A

IR 2940-724

IR R3H-A424

IR R3SH-114

IR R4-33

IR R4-210

IR R4-157

IR R43F-104

IR R43F-70

IR R44H-3

IR R44H-210A

IR R44H-53

IR R4800-102

IR R4800-11

IR R4800-12

IR R4800-119

IR R4800-123

IR R4800-175

IR R4800-191

IR R4800-210

IR R4800-23

IR R4800-283

IR R4801-11

IR R4801-12

IR R4801-739

IR R4801U-8