Bearing, Ball, Dbl Fg, 15 X, 35 x 11, 2Z
IR AG3-24
Bearing, Ball, Dbl Fg, 15 X, 35 x 11, 2Z Assembly, Angle Gears, 1.5 Ratio
IR AG3-A552-1.5
Assembly, Angle Gears, 1.5 Ratio 3/8in and 1/2in Std, 2pc Set
IR AK32H
DXS2 3/8in and 1/2in Drive Standard Anvil 2 Piece Set
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: 2-Piece DXS2 Set, (1) 3/8in Drive Standard Anvil and (1) 1/2in Drive Standard Anvil
- Anvil Length: Standard
- Drive Size (in): 3/8
- Drive Type: Square
- Retainer Type: Friction Ring
- Warranty: 1-year
- Bundle Kit: A31H:1
- Bundle Kit: A41H:1
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
1/2 x 2in, 3/4in Std, 2pc Set
IR AK42H
DXS2 1/2 inch Drive 2 inch Extended and 3/4 inch Drive Standard Anvil 2 Piece Set
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: 2-Piece DXS2 Set, (1) 1/2 inch Drive 2 inch Extended Anvil and (1) 3/4 inch Drive Standard Anvil
- Anvil Length: 2 inch Extended
- Anvil Length: Standard
- Drive Size (in): 1/2
- Drive Type: Square
- Retainer Type: Friction Ring
- Retainer Type: Friction Ring and Thru-hole
- Warranty: 1-year
- Bundle Kit: EA42H:1
- Bundle Kit: A61H:1
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
1/2 x 2in, 1/2 x 4, 3/4in Std, 3pc Set
IR AK43H
DXS2 1/2 inch Drive 2 inch and 4 inch Extended, 3/4 inch Drive Standard Anvil 3 Piece Set
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: 3-Piece DXS2 Set, (1) 1/2 inch Drive 2 inch Extended Anvil, (1) 1/2 inch Drive 4 inch Extended Anvil, (1) 3/4 inch Drive Standard Anvil
- Anvil Length: 2 inch Extended
- Anvil Length: 4 inch Extended
- Anvil Length: Standard
- Drive Size (in): 1/2
- Drive Type: Square
- Retainer Type: Friction Ring
- Retainer Type: Friction Ring and Thru-hole
- Warranty: 1-year
- Bundle Kit: EA42H:1
- Bundle Kit: EA44H:1
- Bundle Kit: A61H:1
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
3/8in and 1/2in Std and 3/4in, 3pc Set
IR AK33H
DXS2 3/8in, 1/2in and 3/4" Drive Standard Anvil 3 Piece Set
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: 3-Piece DXS2 Set, (1) 3/8in Drive Standard Anvil, (1) 1/2in Drive Standard Anvil, (1) 3/4" Drive Standard Anvil
- Anvil Length: Standard
- Drive Size (in): 3/8
- Drive Type: Square
- Retainer Type: Friction Ring
- Retainer Type: Friction Ring and Thru-hole
- Warranty: 1-year
- Bundle Kit: A31H:1
- Bundle Kit: A41H:1
- Bundle Kit: A61H:1
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
Vane Kit, G3 Series
IR AG3-42-4
Vane Pack, Set of 4 for Ingersoll Rand G3 Series Air Grinder
3/4in and 1/2in Std, 2pc Set
IR AK62H
DXS2 1/2in and 3/4" Drive Standard Anvil 2 Piece Set
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: 2-Piece DXS2 Set, (1) 1/2in Drive Standard Anvil and (1) 3/4" Drive Standard Anvil
- Anvil Length: Standard
- Drive Size (in): 1/2
- Drive Type: Square
- Retainer Type: Friction Ring
- Retainer Type: Friction Ring and Thru-hole
- Warranty: 1-year
- Bundle Kit: A41H:1
- Bundle Kit: A61H:1
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
1/2in Pin Anvil Accessory
IR AP41H
DXS2 1/2 inch Drive Pin Anvil Attachment
Description: The DXS system features torque that works smarter, not harder. Tight-fitting DXS attachments deliver up to 15% more motor torque to fasteners making the tools more effective - so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.
Features And Benefits:
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Product Application and Uses:
For use with all Ingersoll Rand DXS2 Drive Impacts.
- Includes: (1) DXS2 1/2 inch Drive Pin Anvil
- Anvil Length: Standard
- Drive Size (in): 1/2
- Drive Type: Square
- Product Length (in): 1.9586614173228347
- Product Width (in): 0.8267716535433072
- Product Height (in): 0.8267716535433072
- Product Weight (lb): 0.17637
- Retainer Type: Pin Detent
- Warranty: 1-year
- For Use With: 2236QPTIMAX
- For Use With: 2236QTIMAX
- For Use With: 2236QTIMAX-2
- For Use With: 2236QTIMAX-G
- For Use With: 2236QTIMAX-O
- For Use With: 2236QTIMAX-R
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
O-Ring
IR BBFM-557
Socket Retaining Ring for Ingersoll Rand 271, 285B, 295A, 2171XP Series 1" Drive Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 271, 285B, 295A and 2171XP impact Wrenches.
- For Use With: 2171XP
- For Use With: 271
- For Use With: 285B
- For Use With: 285B-6
- For Use With: 285B-6-AP
- For Use With: 295A
Charger, 40V
IR BC1161
IQV 40V Universal Lithium-ion Battery Charger for Ingersoll Rand Power Tools
Description: The BC1161 lithium-ion 40V charger gets the batteries in our IQV 40 Series charged and ready to go whenever you are. This innovative, multi-use battery charger will help you get back to work without missing a step. Compatible only with the IQV 40 BL4011 40 volt battery.
Features And Benefits:
- Productivity: An LED Fuel Gauge and audible alarm will let you know when your batteries are fully charged and ready to get back to work.
- Versatility: Not only can the BC1161 be mounted vertically or horizontally on a wall or work bench but the USB charge port on the side means you don't have to fight for an outlet with your tablet or smart phone. Let us take care of the clutter, you take care of your work.
Product Application and Uses:
Compatible only with the Ingersoll Rand IQV 40 Series BL4011 40 volt battery.
- Charge Time: 55 minutes
- Color: Grey
- Voltage DC: 40
- Warranty: 3-year
- Accessories: BL4011
Beam Clamp - 1 Ton -Bct Series
IR BCT-1
Beam Clamp, 1 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp  - 10 Ton - Bct Series
IR BCT-10
Beam Clamp, 10 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp - 3 Ton -Bct Series
IR BCT-3
Beam Clamp, 3 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp - 2 Ton -Bct Series
IR BCT-2
Beam Clamp, 2 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Beam Clamp  - 5 Ton - Bct Series
IR BCT-5
Beam Clamp, 5 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Hose Per Ft, Specify Length, Non-Returnable Part
IR BH6C
Hose Per Ft, Specify Length, Non-Returnable Part
Spring Balancer , 22-33 lbs.
IR BHD-15
Heavy Duty Spring Balancer, 22-33 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 22 - 33
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 22.7
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Heavy-Duty Balancer 33-44 lbs
IR BHD-20
Heavy Duty Spring Balancer, 33-44 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 33 - 44
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 23.4
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer, 55-66 Lbs
IR BHD-30
Heavy Duty Spring Balancer, 55-66 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 55 - 66
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 25.4
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer
IR BHD-65
Heavy Duty Spring Balancer, 121-143 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 121 - 143
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 30
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Anvil
IR 2940-726
1" Square Drive Anvil Replacement Part for Ingersoll Rand 3940 & 3942 Series Impact Wrenches
Product Application and Uses:
For use with 3940and 3942 Series 1" drive square anvil impact wrenches.
- For Use With: 3940B2TI
- For Use With: 3940B2TIEX
- For Use With: 3940P2TI
- For Use With: 3942B2TI
- For Use With: 3942B2TIEX
Impactool
IR 2940B2
1" Air Impact Wrench, Industrial Duty, 1600 ft-lb Torque, Thru-hole Retainer, D-handle Inside Trigger
Description: Find the top impact tools in the industry. The 2940 Series from Ingersoll Rand has over 100 years of legacy behind it.
Features And Benefits:
- 2,000 ft.-lbs. of maximum torque
- Cast iron hammer case and metal housing that will withstand harsh conditions and repeated drops
- Finely Tuned twin hammer impact mechanism delivers more balanced blows that reduces vibration and increases durability
- Bronze end-plate that increases durability and is corrosion resistant
- Pressure-fed mechanism lubrication
- Reverse Bias Motor and Integral muffler
Product Application and Uses:
Heavy Industry, Oil&Gas, Foundry
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Blows per Min: 850
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Industrial Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Hammer Case: Steel
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Max Bolt Diameter (in): 1-3/8
- Max Free Speed (rpm): 5000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1601
- Max Torque (in-lb): 19206
- Max Torque (nm): 2170
- Min Hose Size (in): 3/4
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 10.2
- Product Width (in): 22.1
- Product Height (in): 6.5
- Product Weight (lb): 22
- Recommended Forward Torque Range (ft-lb): 1003-1601
- Recommended Forward Torque Range (in-lb): 12037-19206
- Recommended Forward Torque Range (nm): 1360 - 2170
- Recommended Reverse Torque (ft-lb): 1003-1601
- Recommended Reverse Torque (nm): 1360-2170
- Retainer Type: Thru-hole
- Side to Center Distance (in): 11.1
- Side to Center Distance (mm): 282
- Sound Pressure/Power Db(A): 94.8 / 105.8
- Standards/Certifications: CE, Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 17.8
- Vibration Uncertainy K* (m/s2): 3.4
- Warranty: 1-year
- Accessories: SK8H9TN
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2940-A703
- Parts: 2940-TK3
1.5 Impactool
IR 2955B2
1-1/2" Air Impact Wrench, Heavy Duty, 4500 ft-lb Torque, Friction Ring-Thru-hole Retainer, D-Handle Inside Trigger
Description: This powerful and innovative 1-1/2" square drive Impact Wrench delivers durability at an unmatched economic value. The 2955 Series delivers a competition leading 4,500 ft-lb of Max Reverse torque powered by Ingersoll Rand's finely tuned cold forged twin-hammer impact mechanism. The innovative auxiliary handle allows the tool to be configured for the operator or application. The handle is fully adjustable to any orientation around the hammer case body allowing the tool to reach into confined bolt locations or fit to the most user-friendly position, reducing operator fatigue. Cold forged twin hammers, steel endplates and steel housing deliver unmatched durability in the most rugged applications. The 2955 Series is engineered with Ingersoll Rand's legendary impact mechanism that makes maintenance simple for long life and low total cost of ownership. The 2955 Series is proudly assembled in our Southern Pines, NC facility with domestic and globally sourced components ensuring quality and fast, dependable delivery.
Features And Benefits:
- 4,500 Ft-lbs of torque for tough applications, neutral bias air motor
- 360 Degree side-handle for added versatility when working on pipe flange applications
- Steel hammer case housing and aluminum handle provides durable design for industrial environments
- Cold Forged Twin Hammer mechanism
- Steel Endplates provide wear resistance
- 6-vane motor with optimized air flow
- Assembled in the USA of domestic and global components ensures quality, and fast delivery
Product Application and Uses:
Oil and Gas Repair and Maintenance, Dredging Companies, Mining Equipment Repair and Maintenance, Foundry Shops, River Dams, Hydro and Thermal Power Plants
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Consumption @ Load (cfm): 95
- Air Consumption @ Load (l/min): 2690
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Blows per Min: 700
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1-1/2
- Drive Type: Square
- Duty Rating: Heavy Duty
- End Plates: Steel
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 98.2 / 109.2
- Hammer Case: Steel
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 103.3 / 114.3
- Max Bolt Diameter (in): 1 1/2
- Max Free Speed (rpm): 3300
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 4500
- Max Torque (in-lb): 53990
- Max Torque (nm): 6100
- Min Hose Size (in): 3/4
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 16.5
- Product Width (in): 5.3
- Product Height (in): 8.1
- Product Weight (lb): 35.3
- Recommended Forward Torque Range (ft-lb): 1601-3762
- Recommended Forward Torque Range (in-lb): 19206-45139
- Recommended Forward Torque Range (nm): 2170-5100
- Recommended Reverse Torque (ft-lb): 1601-3762
- Recommended Reverse Torque (nm): 2170-5100
- Retainer Type: Friction Ring and Thru-hole
- Side to Center Distance (in): 2.7
- Side to Center Distance (mm): 69
- Spec
Impact
IR 295A
1" Air Impact Wrench, 1475 ft-lb Torque, Friction Ring-Thru-hole Retainer, Pistol
Description: The 295A Series Impact Wrench combines exceptional power, control and durability is great for any garage. They deliver 1,770 ft-lb of maximum torque @ 120 psi, with 5,250 rpm free speed and a high-efficiency, 6-vane motor. The top-mounted dead handle provides great leverage for difficult underbody work.
Features And Benefits:
- Power: The rocking dog's combination of high inertia and low BPM means this tool can deliver a powerful blow with little air, giving you all the power you want without having to overextend yourself.
- Professional Use: Designed for the professional with over 1770 ft.-lbs. of torque for the toughest applications.
- Reliability: Built with a steel hammer case and metal housing, this wrench can withstand repeated drops and harsh weather conditions.
- Durable and Resistant: Phenolic 6 vane motor resist harsh environments for less downtime on the job.
- Control: Features top mounted dead handle, Feather Touch trigger and 3 position power regulator in both forward and reverse.
- Speed: The impact wrench has a free speed of 5,250 rpm.
- Optimized: Optimized for the vehicle repair industry, heavy trucks, tire lanes, and MRO. 1-year warranty.
Product Application and Uses:
Vehicle Repair, General Industrial, Facility Maintenance
- Actuation/Throttle Type/Switch Type: Feather-touch Trigger
- Air Consumption @ Load (cfm): 61
- Air Consumption @ Load (l/min): 1727
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 120
- Anvil Length: Standard
- Average Air Consumption (cfm): 10
- Average Air Consumption (l/min): 283
- Blows per Min: 830
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Heavy Duty
- End Plates: Cast Iron
- Exhaust Location: Bottom
- Hammer Case: Aluminum
- Housing Material: Aluminum core with composite sleeve
- Impact Mechanism: Rocking Dog
- Max Bolt Diameter (in): 1-1/4
- Max Free Speed (rpm): 5250
- Max Torque (ft-lb): 1770
- Max Torque (in-lb): 21242
- Max Torque (nm): 2400
- Min Hose Size (in): 3/4
- Motor: Non-Biased
- Number of Power Settings: 3
- Power Source: Air Powered
- Product Length (in): 10.5
- Product Width (in): 8
- Product Height (in): 7.5
- Product Weight (lb): 22
- Recommended Forward Torque Range (ft-lb): 120-1080
- Recommended Forward Torque Range (in-lb): 1443-12957
- Recommended Forward Torque Range (nm): 163-1464
- Retainer Type: Friction Ring and Thru-hole
- Side to Center Distance (in): 4
- Side to Center Distance (mm): 102
- Sound Pressure/Power Db(A): 102.5/113.5
- Speed Setting: Variable Speed
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 12.7
- Vibration Uncertainy K* (m/s2): 2.5
- Warranty: 1-year
- Accessories: 295-BOOT
- Accessories: SK8H9TN
- Lubrication: 105-LBK1
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 285B-A726
- Parts: 295A-303
- Parts: 295A-50
- Parts:
Valve Seat
IR 295A-303
Valve Seat for Ingersoll Rand 295A Series Impact Wrench
Product Application and Uses:
For use with Ingersoll Rand 295A Series Air Impact Wrench
- For Use With: 295A
Throttle Valve
IR 295A-50
Throttle Valve for Ingersoll Rand 295A Series Impact Wrench
- For Use With: 295A
Throttle Valve Spring
IR 295A-51
Throttle Valve Spring for Ingersoll Rand 295A Impact Wrench
- For Use With: 295A
Tune-Up Kit
IR 295A-TK1
Tune-up Kit for Ingersoll Rand 295 Series Impact Wrench
- Includes: (1) Vane pack, (3) Springs, (1) Front Rotor Bearing, (1) Rear Rotor Bearing, (1) Oil Sealing, (2) Gasket, (2) O-Ring, (1) Throttle Valve, (1) Ball
- For Use With: 295A
Chipping Hammer, 2 In Stroke, 2200 Bpm
IR 2DA2SA
Air Chipping Hammer, 2" Stroke, 2200 BPM, Round Shank Oval Collar
Description: The D Series chipping hammers are ready and equipped for any task, from light demolition work to metal removing. With an easily serviceable D-handle and directional exhaust for your convenience, these are hammers you can rely on.
Features And Benefits:
- Weight: At 11.75 lbs., these tools are lightweight and easy to use.
- Reliability: Equipped with a steel cone, you never have to worry that the bit will fall out during production. Comes with a 1-year warranty.
Product Application and Uses:
These Air Percussive Chipping Hammers are designed for chipping, cutting, chiseling and breaking of hardened materials through repetitive application of linear impacts of a tool steel that is retained and driven by the chipper.
- Actuation/Throttle Type/Switch Type: Outside Trigger
- Air Consumption @ Load (cfm): 28
- Air Consumption @ Load (l/min): 793
- Air Inlet: 7/8" NPT
- Air Pressure (psi): 90
- Blows per Min: 2200
- Bore Diameter (in): 1.125
- Collar Type: Oval
- Color: Beige
- Configuration/Handle Type: D-Handle
- Duty Rating: Industrial Duty
- Exhaust Location: Side - Adjustable
- Housing Material: Aluminum
- Max Pressure (bar): 6.2
- Min Hose Size (in): 1
- Muffler: No
- Power Source: Air Powered
- Product Length (in): 13.75
- Product Weight (lb): 11.75
- Retainer Type: Grooved Barrel with Lock-spring (Plain Arrow)
- Shank SIze (in): 0.68
- Shank Type: Round
- Stroke Length (in): 2
- Warranty: 1-year
- Accessories: HH1-1190
- Accessories: HH1-215-12
- Accessories: HH1-215-18
- Accessories: HH1-215B-12
- Accessories: HH1-215B-18
- Accessories: HH1-215B-9
- Accessories: HH1-215D-12
- Accessories: HH1-215F-12
- Accessories: HH1-215F-18
- Accessories: HH1-215F-24
- Accessories: HH1-215F-36
- Accessories: HH1-215F-48
- Accessories: HH1-215F-60
- Accessories: HH1-215F-72
- Accessories: HH1-215F-9
- Accessories: HH1-215F-96
- Accessories: HH1-215M-12
- Accessories: HH1-215M-18
- Accessories: HH1-215M-24
- Accessories: HH1-215M-36
- Accessories: HH1-215M-9
- Accessories: HH1-215S-12
- Accessories: HH1-215T-9
- Accessories: HH1-323-12
- Accessories: HH1-323-18
- Accessories: HH1-323-24
- Accessories: HH1-323-48
- Accessories: HH1-323-60
- Accessories: HH1-323-72
- Accessories: HH1-323-9
- Accessories: HH1-323-96
- Lubrication: 10P
- Parts: HH1-1194
Bearing (307A-22)
IR 301-22
Ball Bearing Replacement Part for Ingersoll Rand Power Tools
Product Application and Uses:
For use with Ingersoll Rand 301 Series, 307 Series, 1105 Series, 3107 Series, 3101 Series, 302 Series, 308 Series Air Die Grinder and QIS Series
Bearing (307A-24)
IR 301-24
Bearing for Ingersoll Rand Air Ratchet Wrenches
Product Application and Uses:
For use with 301, 302, 307, 308, 5102MAX, 5108MAX, 1105MAX, 3101, 3107 Series Air Die Grinders
Vane Pack
IR 301-42-4
Vane Pack for Ingersoll Rand Air Ratchet Wrench
Product Application and Uses:
For use with Ingersoll Rand 301 Series, 307 Series, 3101 Series, 3107 Series Air Die Grinders and 105 Series, 1105 Series ratchet wrenches
- For Use With: 301B
- For Use With: 301B-M
- For Use With: 301B2MK
- For Use With: 301B32MK
- For Use With: 301B3MK
- For Use With: 301BK
- For Use With: 307B
- For Use With: 307B-M
- For Use With: 307BK
Spacer (307A-17)
IR 301-448
Spacer Replacement Part for Ingersoll Rand Air Die Grinders
Product Application and Uses:
For use with Ingersoll Rand 301, 307, 3101, 3107, 302, and 308 Series air die gringers
- Finish: Black Oxide
Pinion Key
IR 301-579
Pinion Key for Ingersoll Rand Air Die Grinders
Product Application and Uses:
For use with 301, 302, 307, 308, 5102MAX, and 5108MAX Series die grinders.
Nut (307A-698)
IR 301-699
Collet Nut for Ingersoll Rand Air Die Grinder
Product Application and Uses:
For use with Ingersoll Rand 301 Series, 307 Series, 5102 Series, 5108 Series, 3101 Series, 3107 Series, 302 Series, 308 Series die grinders
Wrench, Small
IR 301-69A
Small Wrench for Ingersoll Rand Air Die Grinders
Product Application and Uses:
For use with 5102 Series, 5108 Series, 301 Series, 307 Series, 302 Series, 308 Series, and M2 Series die grinders
- For Use With: 307B
- For Use With: 307B-M
- For Use With: 307BK
- For Use With: 308B
- For Use With: 308B-M
- For Use With: 308BK
- For Use With: M2A090RP95
- For Use With: M2A120RG4
- For Use With: M2A120RP1045
- For Use With: M2A120RP64
- For Use With: M2A120RP945
- For Use With: M2A120RP95
- For Use With: M2A135RP64
- For Use With: M2A180RG4
- For Use With: M2E145RP64
- For Use With: M2H200RG4
- For Use With: M2L120RP1045
- For Use With: M2X075RG4
- For Use With: M2X180RG4
- For Use With: M2X200RG4
- For Use With: M2X250RG4
Wrench, Large
IR 301-69B
Large Wrench for Ingersoll Rand Air Die Grinder
Product Application and Uses:
For use with the following Ingersoll Rand 301, 307, 5102, 5108, 302, 308 Series die grinders.
Collet 1/8"
IR 301-700C
Collect Replacement Part for Ingersoll Rand 301 and 307 Die Grinder
Die Grinder, 0.25 Hp, 21K, Angle, 1/4in
IR 301B
Angle Air Die Grinder, 21,000 RPM, 0.25 HP, 1/4" Collet, Front Exhaust
Description: As part of an expanded line of long-lasting, economical, general purpose grinders, the 301B delivers a number of beneficial features in one compact package. Right-angle configuration provides easy access to tight spots, so you can grind, break sharp edges, de-burr, port, and polish virtually anywhere!
Features And Benefits:
- Performance: Powerful motor with precision gearing offers .25 HP at 21,000 RPM.
- Durable: Ball-bearing construction offers improved balance, reduces vibration, and ensures a longer product life.
- Strong: Aluminum housing withstands tough operating conditions.
- Lightweight: Small and sturdy design weighs only 1.02 lbs and provides easy operation and the right angle configuration allows better access to tight spots.
- Front exhaust: Helps keep work surface clean.
- Safety: 1/4" collet and a integral self-locking throttle lever that prevents accidental start up.
- Usage: Use this air die grinder as a handheld power rotary tool die grinding, cutting, polishing and more.
Product Application and Uses:
Use this air die grinder as a handheld power rotary tool for de-burring, polishing, porting, smoothing edges, weld grinding and more.
- Includes: Tool, 1/4" collet, (2) Wrenches and Manuals
- Actuation/Throttle Type/Switch Location: Bottom
- Actuation/Throttle Type/Switch Type: Lever
- Air Consumption @ Load (cfm): 24
- Air Consumption @ Load (l/min): 680
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Arbor/Collet: 1/4"
- Average Air Consumption (cfm): 6
- Average Air Consumption (l/min): 170
- Bearing Type: Ball Bearing
- Configuration/Handle Type: Right Angle
- Duty Rating: Medium Duty
- Exhaust Location: Front
- Grinder Type: Die Grinder
- Handle Material: Aluminum
- Height Over Spindle (in): 3
- Housing Material: Aluminum
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 21000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/8
- Power Source: Air Powered
- Product Length (in): 5.27
- Product Width (in): 3.5
- Product Height (in): 2
- Product Weight (lb): 1.02
- Rated Power (hp): 0.25
- Right Angle Length (in): 2
- Right Angle Length (mm): 51
- Side to Center Distance (in): 0.54
- Side to Center Distance (mm): 14
- Sound Pressure/Power Db(A): 91.8 / 104.8
- Speed Setting: Variable Speed
- Standards/Certifications: 2006/42/Ec, En Iso 28927-12, En Iso 15744
- Vibration Level (m/s2): 5.9
- Warranty: 1-year
- Complete Tool Kits: 301BK
- Complete Tool Kits: 301B2MK
- Complete Tool Kits: 301B3MK
- Complete Tool Kits: 301B32MK
- Lubrication: 10G
- Lubrication: 10P
- Parts: 02A-VAR-KIT
- Parts: 301-42-4
- Parts: 301-K591A
Die Grinder Kit, 2"
IR 301B2MK
Angle Air Die Grinder 2" Pad Kit, 21,000 RPM, 0.25 HP, 1/4" & 6mm Collets, Front Exhaust
Description: As part of an expanded line of long-lasting, economical, general purpose grinders, the 301B delivers a number of beneficial features in one compact package. Right-angle configuration provides easy access to tight spots, so you can grind, break sharp edges, de-burr, port, and polish virtually anywhere! Kit includes (4) 2" coarse pads, (4) 2" medium pads, Blow-molded case.
Features And Benefits:
- Performance: Powerful motor with precision gearing offers .25 HP at 21,000 RPM.
- Durable: Ball-bearing construction offers improved balance, reduces vibration, and ensures a longer product life.
- Strong: Aluminum housing withstands tough operating conditions.
- Lightweight: Small and sturdy design weighs only 1.02 lbs and provides easy operation and the right angle configuration allows better access to tight spots.
- Front exhaust: Helps keep work surface clean.
- Safety: 1/4" and 6mm collets and a intefral self-locking throttle lever that prevents accidental start up.
- Usage: Use this air die grinder as a handheld power rotary tool die grinding, cutting, polishing and more.
- Kit Includes: (4) 2" coarse pads, (4) 2" medium pads, Blow-molded case.
Product Application and Uses:
Use this air die grinder as a handheld power rotary tool for de-burring, polishing, porting, smoothing edges, weld grinding and more.
- Includes: 301B Air Angle Die Grinder, (4) 2" coarse pads, (4) 2" medium pads, Blow-molded case, 1/4" and 6mm collets, (2) Wrenches and Manuals
- Actuation/Throttle Type/Switch Location: Bottom
- Actuation/Throttle Type/Switch Type: Lever
- Air Consumption @ Load (cfm): 24
- Air Consumption @ Load (l/min): 680
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Arbor/Collet: 1/4"
- Arbor/Collet: 6mm
- Average Air Consumption (cfm): 6
- Average Air Consumption (l/min): 170
- Bearing Type: Ball Bearing
- Configuration/Handle Type: Right Angle
- Duty Rating: Medium Duty
- Exhaust Location: Front
- Grinder Type: Die Grinder
- Handle Material: Aluminum
- Height Over Spindle (in): 3
- Housing Material: Aluminum
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 21000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/8
- Power Source: Air Powered
- Product Length (in): 5.27
- Product Width (in): 3.5
- Product Height (in): 2
- Product Weight (lb): 1.02
- Rated Power (hp): 0.25
- Right Angle Length (in): 2
- Right Angle Length (mm): 51
- Side to Center Distance (in): 0.54
- Side to Center Distance (mm): 14
- Sound Pressure/Power Db(A): 91.8 / 104.8
- Speed Setting: Variable Speed
- Standards/Certifications: 2006/42/Ec, En Iso 28927-12, En Iso 15744
- Vibration Level (m/s2): 5.9
- Warranty: 1-year
- Complete Tool Kits: 301BK
- Complete Tool Kits: 301B3MK
- Complete Tool Kits: 301B32MK
- Lubrication: 10G
- Lubrication: 10P
- Parts: 02A-VAR-KIT
- Parts: 301-42-4
- Parts: 301-K591A