CART, DRAIN, ROLL AROUND
GG 238866
GG 238866
CART, DRAIN, ROLL AROUND
25 gal (95 l) Used-Oil Receiver with Used-Filter Tray, Tool Holders, Sight GaugeOil King is designed with the busy shop in mind. With oversized tires and push-pull handles it allows for smooth maneuvering. The large funnel can collect fluids from both a drain plug and a filter port at the same time.
Large Offset Collection Pan - This funnel can be raised to a maximum height of 72 in. (183 cm) and is equipped with a filter screen to prevent debris from entering the tank. Filter Drain Tray - Used filters are able to drain separately from the collection pan. Convenient Tool Tray - Built-in holding bins for new or used filters, wrenches, and rags all at your fingertips. Liquid Sight Gauge - A full-length liquid level sight gauge lets you know when the tank is full. Large 25 Gallon (94.6L) Capacity Receiver - Made from a heavy-duty, durable UV stabilized polymer. Dent-, rust-, and corrosion-resistant. Oversized Tires - Easily maneuver over hose and rough floors. Two Evacuation Port Options - Choose from the gravity drain valve at the bottom or suction-evacuation from the top.
$1,150.00
KIT, 5:1 TANK PACKAGE NPT
GG 24K839
GG 24K839
KIT, 5:1 TANK PACKAGE NPT
Graco 24K839 LD Series 5:1 Deluxe Stationary 275 Gallon (1040 Liter) Oil Pump with SD™ Series Hose Reel Package - Preset Meter Type
Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.
- Three Inch Air Motor -Provides more power to create better flow.
- Engineered for Durability -Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
- Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
- Built-In Thermal Relief and Inlet Strainer -Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.
- Model: LD
- Air Inlet Size (in): 0.25
- Application: Oil
- Compatible Material: Oil
- Fluid Inlet Size (cm): 2.5400
- Fluid Inlet Size (in): 1
- Fluid Inlet Size (mm): 25.4000
- Fluid Outlet Size (cm): 1.27
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 12.7
- Maximum Flow Rate (GPM): 6.7
- Maximum Working Pressure (bar): 52
- Maximum Working Pressure (kPa): 5200
- Maximum Working Pressure (MPa): 5.2
- Maximum Working Pressure (psi): 750
- Power Type: Pneumatic
- Pump Ratio: 5:1
$4,700.00
KIT, ZONE VALVE, 24VDC NC
GG 24T296
GG 24T296
KIT, ZONE VALVE, 24VDC NC
Graco 24T296 General Accessories - Two-Way Valve, 24 VDC, Normally Closed, Deutsch Cable, 3500 psi
- Designed to custom fit lubrication systems and control when sections or zones of the system will receive lubricant
- Normally Closed
- DC models meet typical application requirements
- Amperage (A): 0.8
- Compatible Material: Grease
- Inlet Size (cm): 0.635
- Inlet Size (in): 1/4
- Inlet Size (mm): 6.35
- Inlet Thread Type: NPT
- IP Rating: IP69K
- Maximum NLGI Grade: #2
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
- Outlet Thread Type: NPT
- Overall Height (cm): 9.779
- Overall Height (in): 3.85
- Overall Height (mm): 97.79
- Overall Width (cm): 5.08
- Overall Width (in): 2
- Overall Width (mm): 50.8
- Power Connection Type: Deutsch DT Series 2 Pin
- Power Rating (W): 18.2
$537.00
METER, PRESET, 60 QRT, RIG, NPT
GG 24V052
GG 24V052
METER, PRESET, 60 QRT, RIG, NPT
Graco 24V052 60 Quart Preset Meter - Includes Nozzle/Extension Kit - Short Rigid Extension - NPT
Mechanical meters are ideal for indoor or outdoor use in all size shops, typically handling applications in automotive dealerships, fast lube centers, and service shops. The meter featured is fitted with a multiple nozzle and extension options and are capable of pumping oil up to 8 gpm (30.2 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.- Preset meter automatically shuts-off flow when preset quantity has been dispensed
- Impact-resistant shroud resists against scratches and protects knob and dial from damage
- Dial and face design made simple, easy to read and set
- Built-in totalizer to manage material usage
- Inlet 1/2 in. NPT with swivel
- Measures fluid in quarts
- Features short extension with oil nozzle
- 5 Year Warranty
- Compatible Material: Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Mechanical
- Extension Type: Rigid
- Includes: Bare Meter, Nozzle Kit
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 160
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±1%
- Meter Pressure Loss (bar): 2
- Meter Pressure Loss (kPa): 200
- Meter Pressure Loss (psi): 30
- Metering Gun Weight (kg): 1.58
- Metering Gun Weight (lb): 3.5
- Minimum Operating Temperature (°C): -45
- Minimum Operating Temperature (°F): -50
- Nozzle Type: Manual
- Outlet Size (cm): 1.27
- Outlet Size (in): 0.75
- Outlet Size (mm): 12.7
- Outlet Thread Type: ORB
- Recommended Environment: Indoor, Outdoor
Call for pricing
MANIFOLD, ASSY, CC, 2 VALVE, LP
GG 24Y936
GG 24Y936
MANIFOLD, ASSY, CC, 2 VALVE, LP
2 Valve SST Low Pressure Non-Circulating Valve Low Pressure Non-Circulating Valve
$2,270.00
LDP5 VALVE, METERED, FLEX EXT
GG 258694
GG 258694
LDP5 VALVE, METERED, FLEX EXT
Graco 258694 LDP5 Electronic Preset Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - Trigger Guard and Swivel Cover Included - NPT
Graco&prime, s LDP5 meters are perfect for lower-volume service application in small service shops, fast lube centers and automotive dealerships. These meters are capable of metering petroleum, synthetic based oil and anti-freeze up to 5 gpm (19 lpm).
Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, and In-plant.- Easy to read LCD screen keeps dispenses precise.
- Inlet 1/2 in. NPT with swivel.
- Rugged meter body is impact resistant for long life.
- Preset meter automatically shuts-off flow when preset quantity has been dispensed.
- 5 year warranty. See manufacturers website for details.
- Model: LDP5
- Approvals: CE
- Compatible Material: Oil, Antifreeze
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension, Trigger Guard, Swivel Cover
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Operating Temperature (°C): 49
- Maximum Operating Temperature (°F): 120
- Maximum Storage Temperature (°C): 49
- Maximum Storage Temperature (°F): 120
- Maximum Working Pressure (bar): 69
- Maximum Working Pressure (kPa): 6900
- Maximum Working Pressure (MPa): 6.9
- Maximum Working Pressure (psi): 1000
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.36
- Metering Gun Weight (lb): 3
- Minimum Operating Temperature (°C): 0
- Minimum Operating Temperature (°F): 32
- Nozzle Type: Automatic
- Outlet Size (cm): 0.9525
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Outlet Thread Type: NPT
- Overall Height (cm): 8.3
- Overall Height (in): 3.25
- Overall Height (mm): 83
- Overall Length (cm): 28
- Overall Length (in): 11
- Overall Length (mm): 280
- Overall Width (cm): 8.3
- Overall Width (in): 3.25
- Overall Width (mm): 83
- Recommended Environment: Indoor
$1,125.00
EM SERIES EM8 VALVE, RIGID EXT, 1/2" NPT
GG 25C903
GG 25C903
EM SERIES EM8 VALVE, RIGID EXT, 1/2" NPT
Graco 25C903 EM8 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT
EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.
- Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
- High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
- Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
- Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
- Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.
- Model: EM8
- Series: A
- Approvals: CE
- Calibration Type: Factory Calibrated
- Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
- Display Type: Electronic
- Extension Type: Rigid
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- IP Rating: 69K
- Maximum Flow Rate (cc/min): 30283
- Maximum Flow Rate (cc/sec): 505
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30.3
- Maximum Operating Temperature (°C): 82
- Maximum Operating Temperature (°F): 180
- Maximum Recorded Dispense: 19999
- Maximum Storage Temperature (°C): 85
- Maximum Storage Temperature (°F): 185
- Maximum Totalizer: 19999
- Maximum Working Pressure (bar): 102
- Maximum Working Pressure (kPa): 10200
- Maximum Working Pressure (MPa): 10.2
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
- Meter Pressure Loss (psi): 30 PSI at 6 GPM
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 1.36
- Metering Gun Weight (lb): 3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.95
- Minimum Operating Temperature (°C): -30
- Minimum Operating Temperature (°F): -22
- Nozzle Type: Manual
- Outlet Size (cm): 1.905
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Outlet Thread Type: ORB
- Overall Height (cm): 13.3
- Overall Height (in): 5.25
- Overall Height (mm): 133
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9
- Overall Width (in): 3.5 <
$775.00
PUMP, 115V, 3.7 GPM, ON DEMAND
GG 25T817
GG 25T817
PUMP, 115V, 3.7 GPM, ON DEMAND
EGP™ On-Demand Pump, 115 VAC, 3.7 gpm (14.0 lpm), 500 psi (34.5 bar) Choose cost-saving convenience with the all-new Graco EGP electric pumps. Install the EGP on-demand pump to replace traditional pneumatic pumps and reduce operating costs. These pumps offer the same powerful, high-quality performance you’ve come to expect from Graco — only for less operating cost and more convenience. Install the EGP On-Demand Pump in a variety of applications including workshops, mobile trucks and industrial plants. Use it as an energy-efficient option to standard pneumatic pumps. Electrical Flexibility - Available in 12 VDC and 115 VAC power options. Smooth Fluid Flow 4 gpm (15 lpm) - Output flow is continuous and non-pulsating up to 4 gpm (15 lpm). Heavy-Duty Motor with Long Life - Industrial-grade electric motors with over-temperature protection on 115 VAC models. Fluid Flow When Needed - On-demand pressure sensing technology starts and stops the pump during the dispense. Pump Reliability - Internal inlet and outlet checks keep pump section flooded to maintain prime for reliable performance. Simultaneous Dispenses - Pump long distances and supply fluid to multiple dispense points.
$1,760.00
RAC 5 TIP, SPRAY
GG 286331
GG 286331
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 331 The Reverse-A-Clean (RAC) 331 RAC 5 SwitchTip is designed for narrow surfaces and thicker materials. The 331 SwitchTip has a 0.031 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286413
GG 286413
RAC 5 TIP, SPRAY
Graco 286413 RAC 5 SwitchTip, 413
The Reverse-A-Clean (RAC) 413 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 25.4
- Maximum Fan Width (in): 8
- Maximum Fan Width (mm): 254
- Maximum Flow Rate (GPM): 0.18
- Maximum Flow Rate (L/min): 0.68
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 8
- Minimum Fan Width (mm): 203
- Orifice Diameter (in): 0.013
$62.75
RAC 5 TIP, SPRAY
GG 286419
GG 286419
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 419 The Reverse-A-Clean (RAC) 419 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
$62.75
CONNECTOR, 3/16T X 1/8 NPT
GG 556644
GG 556644
CONNECTOR, 3/16T X 1/8 NPT
Fitting - 3/16 in. (4.8 mm) tube compression to 1/8 in. (3.2 mm) NPT For Grease Jockey 3/16 in. (4.8 mm) tubing connections Tube Fittings - Male Connector - 3/16 in. (4.8 mm) Tube, 1/8 in. (3.2 mm) NPTF Lubriquip part number 435-460-030
$3.45
MSP VALVE, ASSY MSP 20S
GG 562714
GG 562714
MSP VALVE, ASSY MSP 20S
Trabon® MSP Modular Divider Valve - MSP-20S - 0.040 in³ (0.66 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-045
$58.00
MSP VALVE, ASSY MSP 40S
GG 562718
GG 562718
MSP VALVE, ASSY MSP 40S
Trabon® MSP Modular Divider Valve - MSP-40S - 0.080 in³ (1.31 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-085
$58.00
SWIVEL, BALL 1/4 180
GG 563215
GG 563215
SWIVEL, BALL 1/4 180
Graco 563215 180º Straight Swivel - 1/4 inch (6.4 mm)
- 180º Straight Swivel - 1/4 inch (6.4 mm)
- Lubriquip part number 509-406-000
- Trabon part number 9406
- Angle (°): 180
- Connection Type: Threaded
- For Use With: Pipe
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
$76.75
MODU-FLO PUMP, ASSEMBLY, AL-5M
GG 563304
GG 563304
MODU-FLO PUMP, ASSEMBLY, AL-5M
Modu-Flo® AL-5M Pneumatic Pump without ReservoirMix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.
Easy to standardize on components and reduce inventory Adjustable pump output for fast, convenient customizing Lubriquip part number 521-000-001
$903.00
MANIFOLD, ASSY RESV TO PUMP
GG 563324
GG 563324
MANIFOLD, ASSY RESV TO PUMP
Graco 563324 Pump-to-Reservoir Manifold for Modu-Flo Pumps, NPT, Dry Gauge, Fill Check, Outlet Check, Blowout
Application: For use with Modu-Flo Pumps.
- Pump/Reservoir Manifold (NPT) w/Outlet Check Valve, System Fill Check Valve, Blowout Assembly, 0-3,000 psi Pressure Gauge
- Lubriquip part number 521-001-180
- Model: Trabon
- Includes: Outlet Check Valve, System Fill Check Valve, Blowout Assembly, Pressure Gauge
$378.00
AA Tip
GG AAM613
GG AAM613
TIP, AAM613
Graco AAM613 Fine Finish Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
LDX SERIES REEL, HOSE, 1/2" X 50', OIL
GG HEM004
GG HEM004
LDX SERIES REEL, HOSE, 1/2" X 50', OIL
LDX™ Series, Oil, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT Graco’s industrial-grade LDX hose reel offers incredible value for cost-conscious workshops. Its all-metal frame and specially crafted, long-lasting components provide consistent release and retraction. Designed for smaller garages, independent repair facilities and industrial manufacturing environments. Dual Pedestal Frame - Ribbed metal for increased stability and robustness. External Swivel Housing - Quickly access swivel seal for faster repairs. Ball Bearing Swivel - Swivel designed with internal ball bearings reduces friction and ensures smooth operation. Adjustable Arm - Easily change to one of six arm positions to fit your application. Large Hose Capacity with Small Profile - Compact design accommodates up to a 50 foot (15 meter) hose to meet a wide variety of application requirements.
$650.00
LOWER, CHEMICAL, 60, SST, UCUP
GG L060S1
GG L060S1
LOWER, CHEMICAL, 60, SST, UCUP
Graco L060S1 Z-Pump, 60 cc, Severe Duty, S1
Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.
- Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
- Precision control eliminates pressure spikes and guarantees on ratio dispense.
- Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
- Model: Z-Pump
- Series: S1
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Industrial
- Ball Check Size (in): 1
- Ball Material: Silicon Nitride
- Coating Type: Severe Duty
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: SAE
- For Use With: HFR
- Maximum Flow Rate (GPM): 0.95
- Maximum Operating Temperature (°F): 180
- Maximum Output (cm³): 60
- Maximum Pump Speed (CPM): 60
- Maximum Viscosity (cP): 3000000
$10,980.00
RAC X LTX TIP, SPRAY, 321
GG LTX321
GG LTX321
RAC X LTX TIP, SPRAY, 321
RAC X SwitchTip, 321 The Reverse-A-Clean (RAC) 321 RAC X SwitchTip is designed for narrow surfaces and thick materials. The 321 SwitchTip has a 0.021 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25
RAC X LTX TIP, SPRAY, (425)
GG LTX425
GG LTX425
RAC X LTX TIP, SPRAY, (425)
RAC X SwitchTip, 425 The Reverse-A-Clean (RAC) 425 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25