RAC X FFLP TIP, SPRAY, (208)
GG FFLP208
RAC X FFLP TIP, SPRAY, (208)
Fine Finish Low Pressure RAC X FF LP SwitchTip, 208 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 208 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch Fan pattern and has a 0.008 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting Fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
RAC X FFLP TIP, SPRAY, (212)
GG FFLP212
RAC X FFLP TIP, SPRAY, (212)
Graco FFLP212 Fine Finish Low Pressure RAC X FF LP SwitchTip, 212
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 212 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch Fan pattern and has a 0.012 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.
Application: For fine finish applications- Less Prep & Cleanup Time
Less mess with less overspray
Put the paint where you want it
- Easiest Pattern Overlap
Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality
- Extended Life
Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life
- Best Tip on the Market
Works with any airless sprayer
Longest lasting Fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
RAC X FFLP TIP, SPRAY, (308)
GG FFLP308
RAC X FFLP TIP, SPRAY, (308)
Fine Finish Low Pressure RAC X FF LP SwitchTip, 308 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 308 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 inch Fan pattern and has a 0.008 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting Fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
FITTING, QS, FEP, INIFLEX
GG FXFF01
FITTING, QS, FEP, INIFLEX
IniFlex Fitting, FEP Tube fitting style, quantity 1 Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.
FITTING, QS, NPT, INIFLEX
GG FXFP01
FITTING, QS, NPT, INIFLEX
IniFlex Fitting, NPT fitting style, quantity 1 Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.
XD SERIES 30 REEL, HOSE, 3/4 X 50, DEF, BLUE
GG HSDD5B
XD SERIES 30 REEL, HOSE, 3/4 X 50, DEF, BLUE
Graco HSDD5B XD30™, DEF, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Metallic Blue
Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).
Application: Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks.- Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
- Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications
XD SERIES 30 REEL, 3/4 X 50, A/W, BLUE
GG HSLD5B
XD SERIES 30 REEL, 3/4 X 50, A/W, BLUE
Graco HSLD5B XD30™, Air/Water/Antifreeze/WWS, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Metallic Blue
Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).
Application: Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks.- Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
- Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications
XD SERIES 30 REEL, 3/4 X 50, OIL, BLUE
GG HSMD5B
XD SERIES 30 REEL, 3/4 X 50, OIL, BLUE
XD30™, Oil, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Metallic Blue Graco’s XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF). Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks. Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models) Durable Finish - Baked-on enamel finish protects reel from corrosion Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications
LOWER, CHEMICAL, 010, SST, UCUP, HW
GG L010S5
LOWER, CHEMICAL, 010, SST, UCUP, HW
Graco L010S5 Z-Pump, 10cc, High Wear, S5
Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.
- High Wear coatings and 1/2 inch (1.27 cm) checks easily manage material wear from thermal interface material (TIMs), acrylics, or other abrasive material applications.
- Precision control eliminates pressure spikes and guarantees on ratio dispense.
- Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
LOWER, CHEMICAL, 20, SST, UCUP
GG L020S1
LOWER, CHEMICAL, 20, SST, UCUP
Z-Pump, 20 cc, Severe Duty, S1 Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives. Precision control eliminates pressure spikes and guarantees on ratio dispense. Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
LOWER, CHEMICAL, 80, SST, UCUP
GG L080S1
LOWER, CHEMICAL, 80, SST, UCUP
Z-Pump, 80 cc, Severe Duty, S1 Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives. Precision control eliminates pressure spikes and guarantees on ratio dispense. Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
LOWER, CHEMICAL, 100, S8
GG L100S8
LOWER, CHEMICAL, 100, S8
Z-Pump, 100 cc, Elite, S8 Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Elite coatings and 7/8 inch (2.22 cm) checks easily manage material wear from thermal interface material (TIMs) or other abrasive applications. Precision control eliminates pressure spikes and guarantees on ratio dispense. Elite high-wear pump seals reduce maintenance downtime and repair costs.
DURA-FLO 430 PUMP, RECIP, DISPL
GG L430SM
DURA-FLO 430 PUMP, RECIP, DISPL
Graco L430SM Dura-Flo 1800 (430 cc) Lower, Stainless Steel, 4 Leather, 3 UHMWPE Throat/3 UHMWPE, 2 Leather Piston Packings
Application: With priming piston, rod and cylinder.- Model: Dura-Flo
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Compatible Material: Motor Oil, Gear Oil, Automatic Transmission Fluid, Oil
- Fluid Inlet Size (cm): 5.08
- Fluid Inlet Size (in): 2
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (in): 1-1/2
- Fluid Outlet Thread Gender: Male
- Fluid Outlet Thread Type: NPT
- For Use With: Dura-Flo Oil Pumps
- Maximum Flow Rate (GPM): 6.9
- Maximum Operating Temperature (°F): 150
- Maximum Output (cm³): 430
- Maximum Pump Speed (CPM): 60
- Maximum Working Pressure (psi): 4700
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5315
RAC 5 LINELAZER TIP, SPRAY, STRIPING
LineLazer RAC 5 SwitchTip, 315 The Reverse-A-Clean (RAC) 315 LineLazer RAC 5 SwitchTip has a 0.015 inch orifice and produces a 4 to 6 inch line. Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints. LineLazer RAC 5 SwitchTip (Yellow Handle)- Creates clean, laser-sharp lines with no fuzzy edges or thin spots
- Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields
- Sprays heavy water-base to thin alkyd traffic paints
- Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5317
RAC 5 LINELAZER TIP, SPRAY, STRIPING
Graco LL5317 LineLazer RAC 5 SwitchTip, 317
The Reverse-A-Clean (RAC) 317 LineLazer RAC 5 SwitchTip has a 0.017 inch orifice and produces a 4 to 6 inch line.
Application: Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints.- LineLazer RAC 5 SwitchTip (Yellow Handle)
Creates clean, laser-sharp lines with no fuzzy edges or thin spots
Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields
Sprays heavy water-base to thin alkyd traffic paints
Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5321
RAC 5 LINELAZER TIP, SPRAY, STRIPING
LineLazer RAC 5 SwitchTip, 321 The Reverse-A-Clean (RAC) 321 LineLazer RAC 5 SwitchTip has a 0.021 inch orifice and produces a 4 to 6 inch line. Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints. LineLazer RAC 5 SwitchTip (Yellow Handle)- Creates clean, laser-sharp lines with no fuzzy edges or thin spots
- Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields
- Sprays heavy water-base to thin alkyd traffic paints
- Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5323
RAC 5 LINELAZER TIP, SPRAY, STRIPING
LineLazer RAC 5 SwitchTip, 323 The Reverse-A-Clean (RAC) 323 LineLazer RAC 5 SwitchTip has a 0.023 inch orifice and produces a 4 to 6 inch line. Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints. Creates clean, laser-sharp lines with no fuzzy edges or thin spots Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields Sprays heavy water-base to thin alkyd traffic paints Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5621
RAC 5 LINELAZER TIP, SPRAY, STRIPING
LineLazer RAC 5 SwitchTip, 621 The Reverse-A-Clean (RAC) 621 LineLazer RAC 5 SwitchTip has a 0.021 inch orifice and produces an 8 to 12 inch line. Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints. Creates clean, laser-sharp lines with no fuzzy edges or thin spots Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields Sprays heavy water-base to thin alkyd traffic paints Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5623
RAC 5 LINELAZER TIP, SPRAY, STRIPING
LineLazer RAC 5 SwitchTip, 623 The Reverse-A-Clean (RAC) 623 LineLazer RAC 5 SwitchTip has a 0.023 inch orifice and produces an 8 to 12 inch line. Creates clean, laser-sharp lines with no fuzzy edges or thin spots Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields Sprays heavy water-base to thin alkyd traffic paints Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC 5 LINELAZER TIP, SPRAY, STRIPING
GG LL5625
RAC 5 LINELAZER TIP, SPRAY, STRIPING
LineLazer RAC 5 SwitchTip, 625 The Reverse-A-Clean (RAC) 625 LineLazer RAC 5 SwitchTip has a 0.025 inch orifice and produces an 8 to 12 inch line. Creates clean, laser-sharp lines with no fuzzy edges or thin spots Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields Sprays heavy water-base to thin alkyd traffic paints Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
RAC X LP TIP, SPRAY, (517)
GG LP517
RAC X LP TIP, SPRAY, (517)
Low Pressure RAC X LP SwitchTip, 517 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 517 Low Pressure (LP) RAC X SwitchTip. This low pressure tip produces a 10 to 12 inch fan pattern and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs. For large surfance areas such as walls and ceilings Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
RAC X LP TIP, SPRAY, (631)
GG LP631
RAC X LP TIP, SPRAY, (631)
Low Pressure RAC X LP SwitchTip, 631 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 631 Low Pressure (LP) RAC X SwitchTip. This low pressure tip produces a 12 to 14 inch fan pattern and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. For large surfance areas such as walls and ceilings Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
RAC X LTX TIP, SPRAY, (221)
GG LTX221
RAC X LTX TIP, SPRAY, (221)
Graco LTX221 RAC X SwitchTip, 221
The Reverse-A-Clean (RAC) 221 RAC X SwitchTip is designed for narrower surfaces and thick materials. The 221 SwitchTip has a 0.021 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
RAC X LTX TIP, SPRAY, (225)
GG LTX225
RAC X LTX TIP, SPRAY, (225)
RAC X SwitchTip, 225 The Reverse-A-Clean (RAC) 225 RAC X SwitchTip is designed for narrower surfaces and thicker materials. The 225 SwitchTip has a 0.025 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
RAC X LTX TIP, SPRAY, (323)
GG LTX323
RAC X LTX TIP, SPRAY, (323)
RAC X SwitchTip, 323 The Reverse-A-Clean (RAC) 323 RAC X SwitchTip is designed for narrow surfaces and thick materials. The 323 SwitchTip has a 0.023 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents