THROTTLE VALVE PLUNGER
IR 3940A-302
IR 3940A-302
Throttle Valve Plunger Service Part for Ingersoll Rand Power Tools
$91.00
1" IMPACTOOL, ATEX
IR 3940B2TIEX
IR 3940B2TIEX
1" Air Impact Wrench, ATEX/Hazardous Duty, 2750 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry. ATEX Marking ATEX 2014/34/EU Ex h IIA T6 Gb X and ISO 80079-36 Certified.Features And Benefits
- Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
- Power: High torque output of 2750 ft-lbs and 800 blows per minute. The reverse bias motor helps remove the most stubborn bolts and the twin hammer mechanism ensures consistent power and balance.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Reverse bias motor to help remove the most stubborn bolts.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses: Hazardous Zones, Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 64
Average Air Consumption (l/min): 1812
Blows per Min: 800
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 100.6 / 111.6
Max Bolt Diameter (in): 1-3/8
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 2750
Max Torque (in-lb): 33004
Max Torque (nm): 3729
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
Product Length (in): 13.5
Product Weight (lb): 21.2
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 500-1800
Recommended Forward Torque Range (in-lb): 6001-21596
Recommended Forward Torque Range (nm): 678-2440
Retainer Type: Thru-hole
Special Features: ATEX Rated, Titanium hammercase
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 13.1
Vibration Uncertainy K* (m/s2): 1.6
Warranty: 1-year
Similar IR
- 3942B2TIEX
$6,630.00
3940-TK1-TUNE UP KIT
IR 3940-TK1
IR 3940-TK1
Tune-up Kit for Ingersoll Rand 3940 Series Air Impact Wrench
Includes: (2) Seals, (1) Throttle Valve Spring, (1) Air Strainer Screen, (4) Gasket, (1) Rear Motor Bearing, (1) Front Motor Bearing, Vane pack, (3) Springs, (1) Ball, (1) PinProduct Application and Uses: For use with Ingersoll Rand 3940A1TI, 3940A2TI, 3940B1TI, 3940B2TI, 3940B2TIEX Impact wrenches
For Use With
- 3940B2TI
- 3940B2TIEX
- 3940P2TI
$220.00
IMPACTOOL
IR 3942B1TI
IR 3942B1TI
No. 5 Spline Air Impact Wrench, Super Duty, 3250 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
With a titanium hammercase, bronze end plates and torque up to 3,250 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.Features And Benefits
- Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
Product Application and Uses: Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 95
Average Air Consumption (l/min): 2690
Blows per Min: 850
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): No. 5
Drive Type: Spline
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 102.7 / 113.7
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 99.0 / 110.0
Max Free Speed (rpm): 5000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 3250
Max Torque (in-lb): 39005
Max Torque (nm): 4407
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 14.3
Product Weight (lb): 22.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 3000
Recommended Forward Torque Range (in-lb): 36005
Recommended Forward Torque Range (nm): 4068
Retainer Type: Thru-hole
Special Features: Titanium hammercase
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 16.9
Vibration Uncertainy K* (m/s2): 4.6
Warranty: 1-year
Similar IR
- 3940A1TI
- 3940B1TI
- 3955B1TI
$5,066.00
1" IMPACTOOL, ATEX
IR 3942B2TIEX
IR 3942B2TIEX
1" Air Impact Wrench, ATEX/Hazardous Duty, 3250 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 3250 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry. ATEX Marking ATEX 2014/34/EU Ex h IIA T6 Gb X and ISO 80079-36 Certified.Features And Benefits
- Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
- Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Reverse bias motor to help remove the most stubborn bolts.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses: Hazardous Environment, Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 95
Average Air Consumption (l/min): 2690
Blows per Min: 800
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 102.7 / 113.7
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 99.0 / 110.0
Max Bolt Diameter (in): 1-3/8
Max Free Speed (rpm): 5000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 3250
Max Torque (in-lb): 39005
Max Torque (nm): 4407
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 144
Product Length (in): 14.3
Product Weight (lb): 22.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 3000
Recommended Forward Torque Range (in-lb): 36005
Recommended Forward Torque Range (nm): 4068
Retainer Type: Thru-hole
Special Features: ATEX Rated, Titanium hammercase
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 16.9
Vibration Uncertainy K* (m/s2): 4.6
Warranty: 1-year
Similar IR
- 3940B2TIEX
$7,140.00
1.5" IMPACTOOL 3955A2TI
IR 3955A2TI
IR 3955A2TI
1-1/2" Air Impact Wrench, Super Duty, 5000 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Outside Trigger
With a titanium hammercase, bronze end plates and torque up to 5,000 ft-lbs of torque, the 3900 Series are the premier industrial grade impacts in the industry.Features And Benefits
- Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.
Product Application and Uses: Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 80
Average Air Consumption (l/min): 2266
Blows per Min: 700
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1-1/2
Drive Type: Square
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 101.5 / 112.5
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 101.2 / 112.2
Max Free Speed (rpm): 2750
Max Pressure (bar): 6.2
Max Torque (ft-lb): 5000
Max Torque (in-lb): 60000
Max Torque (nm): 6779
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 16.5
Product Weight (lb): 34.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 3900
Recommended Forward Torque Range (in-lb): 46803
Recommended Forward Torque Range (nm): 5288
Retainer Type: Thru-hole
Special Features: Titanium hammercase
Tool Type: High-torque
Vibration Level (m/s2): 20.8
Vibration Uncertainy K* (m/s2): 8.5
Warranty: 1-year
Similar IR
- 3956A2TI
Superseded To
- 3956A2TI
$6,188.00
Cap Screw, Socket Head
IR 3955-638
IR 3955-638
Socket Head Cap Screw Service Part for Ingersoll Rand Power Tools, Qty 4
$15.00
1.5" IMPACTOOL, ATEX
IR 3955B2TIEX
IR 3955B2TIEX
1-1/2" Air Impact Wrench, ATEX Rated, 5000 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, with a titanium hammer case, bronze end plates, and a corrosion preventative treatment up to 5000 ft-lbs, the 3900 Series are the premier industrial grade impact wrench in the industry.ATEX Markings: ATEX 2014/34/EU and Ex h IIA T6 Gb XISO 80079-36 CertifiedFeatures And Benefits
- Environmental, Heath and Safety: ISO 80079-36 Certified and ATEX Zone 1 or Zone 2 requirements.
- Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this series is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
Product Application and Uses: Hazardous Zones, Vehicle Repair, General Industrial, Facility Maintenance
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 80
Average Air Consumption (l/min): 2266
Blows per Min: 700
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1-1/2
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 101.5 / 112.5
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 101.2 / 112.2
Max Bolt Diameter (in): 1-1/2
Max Free Speed (rpm): 2750
Max Pressure (bar): 6.2
Max Torque (ft-lb): 5000
Max Torque (in-lb): 60000
Max Torque (nm): 6779
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 144.5
Product Length (in): 16.6
Product Width (in): 8.2
Product Height (in): 5.3
Product Weight (lb): 34.6
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 4700
Recommended Forward Torque Range (in-lb): 56397
Recommended Forward Torque Range (nm): 6372
Retainer Type: Thru-hole
Side to Center Distance (in): 4.1
Side to Center Distance (mm): 104
Special Features: ATEX Rated, Titanium hammercase
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 20.8
Vibration Uncertainy K* (m/s2): 8.5
Warranty: 1-year
Similar IR
- 3955B2TI
Superseded To
- 3956B2TIEX
$7,038.00
HAMMER CASE GASKET
IR 3955-36
IR 3955-36
Hammer Case Gasket Service Part for Ingersoll Rand Power Tools
$15.00
1.5 IMPACT WRENCH
IR 3956B2TI
IR 3956B2TI
1-1/2" Air Impact Wrench, 5450 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
The 3956 Series Titanium Pneumatic Impacts has a 360° D-auxiliary handle ensures enhanced ergonomic performance, with greater access and less operator fatigue. An increased power rating provides the confidence you need to power through the toughest of jobs. Our brand name prominently and proudly emblazoned on the side lets you know it’s from the first name in impact tools: Ingersoll Rand®. Because when it comes to performance, durability and reliability, there is simply no substitute for the best.Features And Benefits
- Performance: Best-in-class power-to-weight performance, delivering 5,450 ft-lbs (7,300 Nm) of breakaway torque.
- Ergonomic: Ergonomically enhanced 360° D-auxiliary handle.
- Reliability: Assembled in the USA and backed by our broad network of parts and service to ensure unsurpassed serviceability.
- Durability: Optimized titanium hammercase, along with bronze endplates and corrosion-resistant parts.
Includes: Hanger Bracket
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Consumption @ Load (cfm): 105
Air Consumption @ Load (l/min): 2971.5
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 145
Average Air Consumption (l/min): 4103.5
Blows per Min: 700
Color: Grey
Configuration/Handle Type: D-Handle
Configuration/Handle Type: Auxiliary Handle
Drive Size (in): 1-1/2
Drive Type: Square
Duty Rating: Industrial Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 98.8 / 109.8
Hammer Case: Titanium
Handle Material: Aluminum
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 97.9 / 108.9
Max Bolt Diameter (in): 1-1/2
Max Free Speed (rpm): 3600
Max Pressure (bar): 6.2
Max Torque (ft-lb): 5384
Max Torque (in-lb): 64610
Max Torque (nm): 7300
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Nut-busting/Breakaway Torque (ft-lb): 5384
Nut-busting/Breakaway Torque (in-lb): 64610
Nut-busting/Breakaway Torque (nm): 7300
Power Source: Air Powered
Product Length (in): 16.68
Product Width (in): 5.26
Product Height (in): 11.31
Product Weight (lb): 34.3
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 5178
Recommended Forward Torque Range (in-lb): 62132
Recommended Forward Torque Range (nm): 7020
Retainer Type: Thru-hole
Side to Center Distance (in): 2.67
Side to Center Distance (mm): 68
Standard Bolt Capacity (in): 2
Standards/Certifications: ISO11148-6 2012, CAGIB186.1-2009, ISO 28927-2, ISO 15744
Tool Type: High-torque
Vanes: 7
Vibration Level (m/s2): 16.4
Vibration Uncertainy K* (m/s2): 5.6
Warranty: 1-year
Similar IR
- 3955B2TI
Supersedes
- 3955B2TI
$5,304.00
CHIPPER ROUND NOZZLEW/RETAINER
IR 3A2SA
IR 3A2SA
Air Chipping Hammer, 3" Stroke, 1725 BPM, Round Shank Oval Collar
Whether you’re working in construction or demolition, the A Series chipping hammers are great for any job. With its incredible power-to-weight ratio, these hammers will increase productivity and make working easy.Features And Benefits
- Durability: The A Series chipping hammers are equipped with a rubber buffer retainer and threaded barrels to extend the life of your product.
- Reliability: The A Series hammers have lock spring retainers that make sure the steel stays in place.
- Access: With a swan neck handle and long nozzle, you’ll be able to work in tight, hard to reach spaces with ease.
Product Application and Uses: These Air Percussive Chipping Hammers are designed for chipping, cutting, chiseling and breaking of hardened materials through repetitive application of linear impacts of a tool steel that is retained and driven by the chipper.
Actuation/Throttle Type/Switch Type: Outside Trigger
Air Consumption @ Load (cfm): 29
Air Consumption @ Load (l/min): 821
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Blows per Min: 1725
Bore Diameter (in): 1.125
Collar Type: Oval
Color: Beige
Configuration/Handle Type: Swan Neck
Duty Rating: Industrial Duty
Height Over Spindle (in): 4
Housing Material: Steel
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Muffler: No
Power Source: Air Powered
Product Length (in): 17.88
Product Width (in): 9
Product Weight (lb): 15.63
Retainer Type: Lock-spring (Plain Arrow)
Shank SIze (in): 0.68
Shank Type: Round
Standards/Certifications: Standards
Steels: Yes
Stroke Length (in): 3
Warranty: 1-year
Similar IR
- 2A1SA
- W2A2
- W2A1
$571.20
O-Ring (48951-139)
IR 405-159
IR 405-159
Throttle Valve Face for Ingersoll Rand Impact/Angle Wrenches
For Use With- 231C
- 2705P1
- 2707P1
- 9RSQ83
- 9SQ83
$15.00
VANE PACK
IR 401-42A-6
IR 401-42A-6
Vane Pack for Ingersoll Rand 1702, 211, 212, 215 Series Impact Wrench, 6-Pack
For Use With- 1702P1
- 1702P4
- 1702SB1
$30.00
DIE GRINDER, 0.50 HP, 27K rpm, Straight, 1/4" C
IR 409
IR 409
Air Die Grinder, 27,000 RPM, 0.5HP, 1/4" & 6mm Collets, Front Exhaust
With a powerful vane motor and ergonomic front exhaust to direct air away from your workspace, the 409 Die Grinder is a tough tool to have in your arsenal.Features And Benefits
- Comfort: This die grinder is lightweight and ergonomic, so you can do more work for longer stretches of time.
- Access: The compact 409 Die Grinder allows you to reach tighter spaces with ease.
- Increased Safety: With a locking throttle lever that resets each time the lever is released, the 409 increases operator safety by preventing accidental throttle operation.
Includes: Tool, (2) Wrenches, 6mm Collet and Manuals
Product Application and Uses: De-burring, Polishing, Porting, Smoothing Edges, Weld Grinding
Actuation/Throttle Type/Switch Location: Bottom
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 1/4"
Arbor/Collet: 6mm
Bearing Type: Ball Bearing
Configuration/Handle Type: Straight
Duty Rating: Medium Duty
Exhaust Location: Front
Grinder Type: Die Grinder
Housing Material: Aluminum
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 27000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Power Source: Air Powered
Product Length (in): 5.87
Product Width (in): 3.46
Product Height (in): 2.36
Product Weight (lb): 1.2
Rated Power (hp): 0.5
Side to Center Distance (in): 1.73
Side to Center Distance (mm): 44
Sound Pressure/Power Db(A): 90.9 / 101.9
Speed Setting: Variable Speed
Standards/Certifications: 2006/42/Ec, Iso 28927-12, Iso 15744, Iso 11148-9
Vibration Level (m/s2): 6.4
Warranty: 1-year
Wheel Type: Burr
Similar IR
- 307B
- 308B
- 5108MAX
$108.64
Sander
IR 4151
IR 4151
Random Orbital Air Sander, 3/16" Orbit, 6" Vinyl Pad, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra-high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability- Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Bare Tool
Product Application and Uses: Smoothing, Sanding, Automotive Repair
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Black
Configuration/Handle Type: Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Maintenance Duty
Exhaust Location: Rear
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Air Gear Motor
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 7.48
Product Width (in): 6.8
Product Height (in): 4.8
Product Weight (lb): 1.92
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6 / 92.6
Special Features: Lubrication-free motor
Speed Setting: Variable Speed
Standards/Certifications: Ce
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 7.5
Warranty: 1-year
Similar IR
- 4152
- 4151-HL
- 4151-2
- 4151-5
- 317-B
$204.40
SANDER
IR 4151-2
IR 4151-2
Random Orbital Air Sander, 3/16" Orbit, 6" Vinyl Pad, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Black
Configuration/Handle Type: Extended Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 9.9
Product Height (in): 4.8
Product Weight (lb): 2.46
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 6.2
Warranty: 1-year
Similar IR
- 4152
$370.00
SANDER
IR 4151-5
IR 4151-5
Random Orbital Air Sander, 3/16" Orbit, 5" Vinyl Pad, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Black
Configuration/Handle Type: Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 5
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 7
Product Height (in): 4.8
Product Weight (lb): 1.92
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 6.2
Warranty: 1-year
Similar IR
- 4152
$207.20
O-RING
IR 4151-65
IR 4151-65
O-Ring Replacement Part for Ingersoll Rand 4151 Series Orbital Sander
$15.00
REGULATOR ASSEMBLY
IR 4151-A165
IR 4151-A165
Regulator Assembly for Ingersoll Rand 4151 Orbital Sander
$15.00
KIT, 32MM SLEEVE
IR 4151-A809A-32
IR 4151-A809A-32
32MM Sleeve Kit for Ingersoll Rand 4151 Series Orbital Sander
$15.00
MUFFLER ASSEMBLY
IR 4151-A810
IR 4151-A810
Muffler Assembly for Ingersoll Rand 4151 Series Orbital Sander
$10.00
SANDER
IR 4151-HL
IR 4151-HL
Random Orbital Air Sander, 3/16" Orbit, 6" Hook & Loop, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Black
Configuration/Handle Type: Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Hook & Loop
Power Source: Air Powered
Product Length (in): 7.48
Product Width (in): 6.5
Product Height (in): 4.8
Product Weight (lb): 1.92
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 7
Warranty: 1-year
Similar IR
- 4152
$204.40
SANDER
IR 4151-HL-2
IR 4151-HL-2
Random Orbital Air Sander, 3/16" Orbit, 6" Hook & Loop, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/16-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Configuration/Handle Type: Extended Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Hook & Loop
Power Source: Air Powered
Product Length (in): 9.9
Product Height (in): 4.8
Product Weight (lb): 2.46
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 6.2
Warranty: 1-year
Similar IR
- 4152
$380.00
SANDER
IR 4152
IR 4152
Random Orbital Air Sander, 3/32" Orbit, 6" Adhesive Pad, 12,000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/32-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Consumption (cfm): 8
Air Consumption (l/min): 226
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Red
Configuration/Handle Type: Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/32
Pad Diameter or Size (in): 6
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 7.48
Product Height (in): 4.8
Product Weight (lb): 1.8
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 8.2
Warranty: 1-year
Similar IR
- 4151
- 317-B
$204.40
SANDER
IR 4152-HL
IR 4152-HL
Random Orbital Air Sander, 3/32" Orbit, 6" Hook & Loop, 12000 RPM, 0.2 HP
This vacuum-ready, low-vibration air sander produces an ultra high-quality finish on every job. Extracting dust and particles through and around the pad, this tool keeps foreign matter away from the motor to ensure smooth operation.Features And Benefits
- Vacuum Ready: This random orbital air sander can connect to a number of central or portable vacuum system.
- Durability: Whether you drop it or use it in harsh conditions, this sander can withstand it.
- Performance: Equipped with a 12,000 RPM motor with a 3/32-inch orbit, this sander always has a swirl-free finish.
Includes: Tool with pad, 2 vacuum shrouds, manuals
Product Application and Uses: These Air Orbital Sanders are designed for smoothing and sanding welds, paint, fiber glass wood and body filler, feather edging, removing rust and preparing metal surfaces.
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Color: Red
Configuration/Handle Type: Palm
Dust Collection Port Size: 25mm end size to connect with the hose
Dust Collection Type: Vacuum Hose Mount
Duty Rating: Industrial Duty
Exhaust Location: Rear
Handle Material: Composite
Housing Material: Composite
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 5/16
Motor: Gearless
Number of Vacuum Holes: 6
Orbit Diameter (in): 3/32
Pad Diameter or Size (in): 6
Pad Face: Hook & Loop
Power Source: Air Powered
Product Length (in): 7.48
Product Width (in): 4
Product Height (in): 4.8
Product Weight (lb): 1.92
Rated Power (hp): 0.2
Shroud Style: Short
Sound Pressure/Power Db(A): 81.6
Speed Setting: Variable Speed
Vacuum: Vacuum Ready/Central Vacuum
Vibration Level (m/s2): 7
Warranty: 1-year
Similar IR
- 4151
$365.00
RECIP SAW
IR 4429
IR 4429
Reciprocating Air Saw, 3/8" Stroke, 5,750 Strokes/Minute
This reciprocating saw is a versatile air saw designed for all types of cutting tasks, including intricate shapes and light radius curves in various materials.Features And Benefits
- Lock-Out Lever: These saws contain a tease trigger with a unique lock-off system that prevents accidental throttle operation by utilizing a spring-loaded latch that resets each time the lever is released.
- Access: With an inline configuration, these saws allow for easier access in tight spaces, so even the toughest jobs can get done.
- Reliability: With a guide that increases blade life, you can count on this tool to last.
- Piped Away Exhaust: Piped away exhaust for a cleaner work area.
- Adjustable Guard: Adjustable guard, integral power regulator, and low vibration.
- Comfort and Control: Composite grip area for increased comfort and control.
- Includes: (6) High Speed Steel Cutting Blades and (2) Hex Wrenches
- Usage: For all types of cutting tasks, including intricate shapes and light radius curves in various materials including plastics, fiberglass, composite, aluminum, and sheet metal.
Includes: (2) Hex Wrenches; Manuals; (6) High Speed Steel Cutting Blades
Product Application and Uses: For all types of cutting tasks, including intricate shapes and light radius curves in various materials including plastics, fiberglass, composite, aluminum, and sheet metal.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 7.6
Air Consumption @ Load (l/min): 215
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Blade Material: High Speed Steel
Color: Silver
Configuration/Handle Type: Straight
Duty Rating: Heavy Duty
Exhaust Location: Rear
Free Speed Sound Pressure/Power Db(A): 66.2
Handle Location: Rear
Handle Material: Aluminum with Rubber Overmold
Housing Material: Aluminum
Lock Mechanism: Lever lock in off position
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Number of Blades Included: 6
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 9.25
Product Width (in): 3.5
Product Height (in): 2.7
Product Weight (lb): 1.63
Sound Pressure/Power Db(A): 66.2 (with Piped Away)
Speed Setting: Variable Speed
Stroke Length (in): 0.38
Strokes (per min): 5000
Vibration Level (m/s2): 9.5
Warranty: 1-year
Similar IR
- 429
- 529
$176.40
Reciprocating Saw (329)
IR 429
IR 429
Reciprocating Air Saw, 3/8" Stroke Length, 10,000 Strokes Per Minute, 1.3 Lbs
This reciprocating saw is a versatile air saw designed for all types of cutting tasks, including intricate shapes and light radius curves in various materials.Features And Benefits
- Lock-Out Lever: These saws contain a unique system that prevents accidental throttle operation by utilizing a spring-loaded latch that resets each time the lever is released.
- Access: With an inline configuration, these saws allow for easier access in tight spaces, so even the toughest jobs can get done.
- Reliability: With a guide that increases blade life, you can count on this tool to last.
Includes: (2) Hex Wrenches; Manuals; (6) High Speed Steel Cutting Blades
Product Application and Uses: For use on plastics; fiberglass; composite; aluminum; sheet metal for all types of cutting tasks, including intricate shapes and light radius curves in various materials
Actuation/Throttle Type/Switch Location: Bottom
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 9
Air Consumption @ Load (l/min): 255
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 8
Average Air Consumption (l/min): 226
Blade Material: High Speed Steel
Color: Silver
Configuration/Handle Type: Straight
Duty Rating: Heavy Duty
Exhaust Location: Rear
Handle Location: Rear
Handle Material: Aluminum
Housing Material: Aluminum
Lock Mechanism: Lever lock in off position
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Number of Blades Included: 6
Number of Power Settings: Continuous
Power Source: Air Powered
Product Length (in): 9.02
Product Width (in): 2.83
Product Height (in): 1.42
Product Weight (lb): 1.3
Sound Pressure/Power Db(A): 87.3 / 100.3
Speed Setting: Variable Speed
Stroke Length (in): 0.38
Strokes (per min): 10000
Vibration Level (m/s2): 25.7
Warranty: 1-year
Similar IR
- 4429
- 529
- 429G
$134.40
AIR STRAINER SCREEN
IR 434-61
IR 434-61
Air Strainer Screen Service Part for Ingersoll Rand Power Tools
$15.00
REVERSIBLE CUT-OFF TOOL
IR 426
IR 426
Air Reversible Cut-off Tool, 20,000 RPM, Includes 5 Cut-off Wheels
With a composite housing, this heavy-duty cut-off tool is designed for durability and on-the-job performance. Ideal for cutting through mufflers, tailpipes, nuts, and bolts, this tool is perfect for any vehicle repair market.Features And Benefits
- Reversible: This tool’s reversible function allows you to control the direction of the spark safely so you can use it in any direction.
- Comfort: Thanks to its composite housing’s insulation, this tool can be used for prolonged periods of time without worrying about cold outside air.
- Lightweight: Weighing 2.0 lbs, the 426 allows you to work longer and get the job done faster.
- Lock-Out Lever: This tool contains a unique system that prevents accidental throttle operation by utilising a spring-loaded latch that resets each time the lever is released.
- Control: The speed regulator knob gives you full control over the 426. Change speeds for different needs to ensure you get the job done right.
- Quickly get to work by using the 5 cut-off wheels that come with the 426, and when its time to order more our package labeling makes it easy.
Includes: Tool, 5 cut off wheels
Product Application and Uses: This reversible Cut-Off tool is designed for cutting plastics, fiberglass, composites and metals. Perfect for any vehicle repair market including cutting through mufflers, tailpipes, nuts, and bolts.
Actuation/Throttle Type/Switch Type: Safety Lever
Air Consumption @ Load (cfm): 26
Air Consumption @ Load (l/min): 736
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Average Air Consumption (cfm): 26
Average Air Consumption (l/min): 736
Color: Blue
Configuration/Handle Type: Straight
Duty Rating: General Duty
Exhaust Location: Rear
Housing Material: Impact and chemical-resistant composite housing
Lock Mechanism: Lever lock in off position
Max Free Speed (rpm): 20000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Number of Power Settings: Continuous
Pad Diameter or Size (in): 3
Power Source: Air Powered
Product Length (in): 8.2
Product Width (in): 3.5
Product Height (in): 2.7
Product Weight (lb): 2
Reversible: Reversible
Sound Pressure/Power Db(A): 92.1 / 103.1
Vibration Level (m/s2): 4.3
Warranty: 1-year
Wheel Diameter (in): 3
Wheel Thickness (in): 1-1/16
Wheel Type: Type 1
Similar IR
- 326
$128.24
Screwdriver, Straight, 1000 Rpm
IR 41SC10LTQ4
IR 41SC10LTQ4
Screwdriver, Straight, 1000 Rpm Call for pricing
CAP ASSEMBLY (-342A)
IR 4429-B274B
IR 4429-B274B
Cap Asm for Ingersoll Rand 4429 Reciprocating Saw
$49.00
3" CHISEL - 72" SHK 7/8" X 3-1/4" , QTY 1
IR 45510583
IR 45510583
3" CHISEL - 72" SHK 7/8" X 3-1/4" , QTY 1 $470.00
USB DIGITAL I/O BOX, 8 CHANNEL
IR 47617332001
IR 47617332001
USB DIGITAL I/O BOX, 8 CHANNEL Call for pricing
RPK - PLATE, VALVE CHEST, ASSEMBLY, NO PAINT
IR 47668144001
IR 47668144001
RPK - PLATE, VALVE CHEST, ASSEMBLY, NO PAINT $630.00
DIAMOND POINT - 12" .58 HX SHK OV COL, QTY 1
IR HH1-214D-12
IR HH1-214D-12
DIAMOND POINT - 12" .58 HX SHK OV COL, QTY 1 $56.00
DIAMOND POINT - 12" .68 RD SHK OV COL, QTY 1
IR HH1-215D-12
IR HH1-215D-12
12" Diamond Point Chipping Hammer Steel Round Shank Oval Collar
Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world’s first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.Includes: (1) Diamond Point Steel
Product Application and Uses: Designed for general demolition. For use with Ingersoll Rand 2DA2SA, 3DA2SA, 4DA2SA, 1A2SA, 2A2SA, 3A2SA, 4A2SA chipping hammers
Chisel Style: Diamond Point
Collar Thickness (in): 0.813
Collar Type: Oval
Collar Width (in): 1.125
Housing Material: Steel
Length Under Collar (in): 9.625
Product Length (in): 12
Product Weight (lb): 1.75
Shank Length (in): 2.375
Shank SIze (in): 0.68
Shank Type: Round
For Use With
- 1A2SA
- 2A2SA
- 2DA2SA
- 3A2SA
- 3DA2SA
- 4A2SA
- 4DA2SA
$58.00
MOIL POINT - 12" .58 HX SHK OV COL, QTY 1
IR HH1-214M-12
IR HH1-214M-12
12" Moil Point Chipping Hammer Steel, Hex Shank Oval Collar
Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world’s first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.Includes: (15) Moil Point Steels
Product Application and Uses: Designed for general demolition. For use with Ingersoll Rand 2DA1SA, 3DA1SA, 4DA1SA, 1A1SA, 2A1SA, 3A1SA, 4A1SA chipping hammers
Chisel Style: Moil Point
Collar Thickness (in): 0.813
Collar Type: Oval
Collar Width (in): 1.125
Housing Material: Steel
Length Under Collar (in): 9.625
Product Length (in): 12
Product Weight (lb): 1.75
Shank Length (in): 2.375
Shank SIze (in): 0.58
Shank Type: Hex
For Use With
- 1A1SA
- 2A1SA
- 2DA1SA
- 3A1SA
- 3DA1SA
- 4A1SA
- 4DA1SA
$44.00
3" FLAT BLADE - 12"
IR HH1-215S-12
IR HH1-215S-12
3" Scaling Chipping Hammer Chisel Steels, 12"L Round Shank Oval Collar
Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world’s first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.Includes: (10) Chipping Hammer Chisel Steels
Product Application and Uses: Designed for general demolition. For use with Ingersoll Rand 2DA2SA, 3DA2SA, 4DA2SA, 1A2SA, 2A2SA, 3A2SA, 4A2SA chipping hammers
Chisel Style: Scaling
Collar Thickness (in): 0.813
Collar Type: Oval
Collar Width (in): 1.125
Housing Material: Steel
Length Under Collar (in): 9.625
Product Length (in): 12
Product Width (in): 3
Product Weight (lb): 2
Shank Length (in): 2.375
Shank SIze (in): 0.68
Shank Type: Round
For Use With
- 1A2SA
- 2A2SA
- 2DA2SA
- 3A2SA
- 3DA2SA
- 4A2SA
- 4DA2SA
$111.00
Valve Seat (SD-3)
IR HH-3
IR HH-3
Valve Seat for Ingersoll Rand A, W, D, MDT3-EU Series Chipping Hammer
$124.00