IR 1720P-A40

IR 182A53-A602

IR 182A83-578

IR 1RPMS1

IR 200G-100

IR 201-12

IR 2015-BOOT

Protective Boot for 2015MAX and 2025MAX Series Impact Wrenches

Description: Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.

Features And Benefits:

• Protects surrounding surfaces from scratches, nicks ect.
• Protects tool from damage if dropped.
• Adds further protection from unwanted contaminates that can affect tool performance.

• Color: Grey

• For Use With: 2015MAX
• For Use With: 2025MAX

IR 2015MAX

3/8" Air Impact Wrench, 180 ft-lb Torque, Friction Ring Retainer, Right Angle

Description: This revolutionary product is unlike any other on the market today. The Hammerhead Low Profile impact wrench offers the power and speed of an impact with the reach of a ratchet. The combination of MAX power, MAX control, and MAX access now allows you to use an Ingersoll Rand impact wrench for virtually any application. Say goodbye to awkward extensions and swivel sockets, and watch your productivity soar as you conquer tasks in minutes that once took you hours.

Features And Benefits:

• Max Power: With 180 ft-lbs of max torque and 9000 rpm, this tool offers more than twice the power of the leading competitor's ratchet.
• Max Control: A feather-touch trigger, two-position forward power regulator and conveniently located forward / reverse ring provide precise control.
• Max Access: A head height of under 2" and reactionless torque allow you to safely use this powerful tool in tight spaces.
• Feather touch trigger, 2-position forward power regulator, forward/reverse ring
• Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench.
• Ergonomically sound rear exhaust system.
• Offers the same reach as a ratchet.
• Optimized for the vehicle repair industry, body shops, and MRO.
• 1-year warranty.

Product Application and Uses:

Designed to remove and install threaded fasteners. Optimized for the vehicle repair industry, body shops, and MRO

• Actuation/Throttle Type/Switch Type: Trigger
• Air Consumption @ Load (cfm): 19
• Air Consumption @ Load (l/min): 538
• Air Inlet: 1/4" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard

• Blows per Min: 2100

• Color: Grey
• Configuration/Handle Type: Right Angle
• Drive Size (in): 3/8
• Drive Type: Square
• Duty Rating: Maintenance Duty

• End Plates: Aluminum with Hard-coating
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 94.1 / 105.1

• Hammer Case: Aluminum
• Handle Material: Composite
• Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
• Impact Mechanism: Single Hammer
• Impacting Sound Pressure/Power Db(A): 96.6 / 107.6

• Max Bolt Diameter (in): 0.4375
• Max Free Speed (rpm): 9000
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 180
• Max Torque (in-lb): 2160
• Max Torque (nm): 244
• Min Hose Size (in): 3/8
• Motor: Reverse Bias

• Number of Power Settings: 2
• Power Source: Air Powered
• Product Length (in): 13.1

• Product Width (in): 2.2
• Product Height (in): 3.1
• Product Weight (lb): 3.4
• Recommended Forward Torque Range (ft-lb): 45-140
• Recommended Forward Torque Range (in-lb): 540-1682
• Recommended Forward Torque Range (nm): 61-190
• Recommended Reverse Torque (ft-lb): 45-160
• Recommended Reverse Torque (nm): 61-217
• Retainer Type: Friction Ring

• Side to Center Distance (in): 1.1
• Side to Center Distance (mm): 28

• Speed Setting: Variable Speed
• Standards/Certifications: CE

• Tool Type: Full-size
• Vanes: 6
• Vibration Level (m/s2): 17.4
• Warranty: 2-year

IR 202-664-10

IR 2112-A40

IR 2112-A726

Anvil Assembly Replacement Part for Ingersoll Rand 2125QTIMAX & 2125QTIMAX Impact Wrench

Product Application and Uses:

For use with Ingersoll Rand 2125QTIMAX & 2125QTIMAX Impact Wrenches

• For Use With: 2125QTIMAX
• For Use With: 2125QTIMAX-AP

IR 2115PTIMAX

3/8in Air Impact Wrench, 300 ft-lb Torque, Titanium Hammercase, Pin Retainer, Pistol

Description: The 2115TiMAX delivers best in class performance for a tool less than six inches long and weighing less than two and a half pounds. The minimal size of this tool will allow greater access to tight spaces, while the minimal weight will reduce operator fatigue...all while still delivering MAX performance.

Features And Benefits:

• Durable: With a titanium hammer case and composite housing, this wrench can withstand anything, including repeated drops and harsh environments. In fact, we provide a 2-year warranty to prove it.
• Versatile: This tool is so versatile, it can be used in just about any market.
• Reliable This wrench has been tested and is guaranteed to last. It'll deliver the same level of power every time.
• Easier access to grease fitting - for quicker maintenance and less downtime
• Enhanced socket retention
• 7-vane Motor delivers added power with less weight
• Finely tuned twin hammer impact mechanism and motor deliver more torque, durability, and efficiency
• Feather-touch trigger provides maximum control of this air impact wrench
• Anodized end plate for enhanced durability
• Pin anvil ensures positive socket retention
• Optimized for the vehicle repair industry, body shops, general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, and construction
• Patented one-hand forward/reverse control for easy operation
• Optimized air flow for maximized performance when using this pneumatic impact wrench

Product Application and Uses:

General Industrial, Facility Maintenance

• Includes: Bare Tool
• Actuation/Throttle Type/Switch Type: Trigger
• Air Consumption @ Load (cfm): 17
• Air Consumption @ Load (l/min): 481
• Air Inlet: 1/4" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 4
• Average Air Consumption (l/min): 113

• Blows per Min: 1500

• Color: Grey
• Configuration/Handle Type: Pistol Grip
• Drive Size (in): 3/8
• Drive Type: Square
• Duty Rating: Maintenance Duty

• End Plates: Aluminum with Hard-coating
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 89.7 / 100.7

• Hammer Case: Titanium
• Handle Material: Composite
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 93.2 / 104.2

• Max Bolt Diameter (in): 7/16
• Max Free Speed (rpm): 15000
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 300
• Max Torque (in-lb): 3602
• Max Torque (nm): 407
• Min Hose Size (in): 3/8
• Motor: Reverse Bias

• Number of Power Settings: 4
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 120.9
• Product Length (in): 5.9

• Product Width (in): 2.2
• Product Height (in): 6.7
• Product Weight (lb): 2.48
• Recommended Forward Torque Range (ft-lb): 250
• Recommended Forward Torque Range (in-lb): 3000
• Recommended Forward Torque Range (nm): 339
• Retainer Type: Pin Detent

• Side to Center Distance (in): 1.1
• Side to Center Distance (mm): 28

• Special Features: Titanium hammercase, 2-year Max warranty
• Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744

• Too

IR 2131-703

IR 2131P-B40

IR 2135QI-D727A

IR 2135QTI-A40

IR 2141-11B

IR 2141-D565

IR 2161-A102

IR 2161-A727

IR 216B-50

IR 2175MAX-TK1

Tune-up Kit for Ingersoll Rand 2175 Series Air Impact Wrench

• Includes: inlet parts kit, O-rings, springs, dentent pin, gaskets, cylinder dowl, bearings and vane pack.

• For Use With: 2175MAX
• For Use With: 2175MAX-6

IR 232-A727A

IR 241SR-118

IR 261B-A727

Hammer Case for Ingersoll Rand 261, 271 Series Impact Wrench

• For Use With: 261
• For Use With: 261-3
• For Use With: 261-6
• For Use With: 271

IR 285B-24

IR 2934-53

IR 2934-A703

IR 295A-A40

IR 301-A550A

IR 3102-A552-1.25

IR 311A-235

IR 314A-A552

IR 318A-A171

IR 325-350

IR 329-273

IR 329-274

IR 341SR-A124

Retainer Replacement Part for Ingersoll Rand 341, 441 Series Air Tamper

IR 3940-48

Dead Handle for Ingersoll Rand 3940, 3942, 3955 Series Impact Wrench

IR 3940B2TI

1" Air Impact Wrench, Super Duty, 2750 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger

Description: With a titanium hammer case, bronze end plates and torque up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.

Features And Benefits:

• Power: High torque output of 2750 ft-lbs and 800 blows per minute.
• Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
• Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
• Balance: Twin hammer mechanism ensure consistent power and balance.
• Reverse bias motor to help remove the most stubborn bolts.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
• Integral muffler
• Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding

Product Application and Uses:

Heavy Industry, Oil&Gas, Foundry

• Actuation/Throttle Type/Switch Type: Inside Trigger
• Air Inlet: 1/2" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 64
• Average Air Consumption (l/min): 1812

• Blows per Min: 800

• Color: Grey
• Configuration/Handle Type: D-Handle
• Drive Size (in): 1
• Drive Type: Square
• Duty Rating: Super Duty

• End Plates: Bronze
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4

• Hammer Case: Titanium
• Housing Material: Aluminum
• Impact Mechanism: Twin Hammer
• Impacting Sound Pressure/Power Db(A): 100.6 / 111.6

• Max Bolt Diameter (in): 1-3/8
• Max Free Speed (rpm): 6000
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 2750
• Max Torque (in-lb): 33004
• Max Torque (nm): 3729
• Min Hose Size (in): 3/4
• Motor: Reverse Bias

• Number of Power Settings: Continuous
• Power Source: Air Powered
• Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
• Product Length (in): 13.5

• Product Weight (lb): 21.2
• Quiet Tool: No
• Recommended Forward Torque Range (ft-lb): 500-1800
• Recommended Forward Torque Range (in-lb): 6001-21596
• Recommended Forward Torque Range (nm): 678-2440
• Retainer Type: Thru-hole

• Special Features: Titanium hammercase
• Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744

• Tool Type: Full-size
• Vanes: 7
• Vibration Level (m/s2): 13.1
• Vibration Uncertainy K* (m/s2): 1.6
• Warranty: 1-year

• Accessories: SK8H9TN

• Lubrication: 10G
• Lubrication: 10P
• Lubrication: 10Z4
• Parts: 2940-726
• Parts: 3934-123

• Parts: 3940-TK1

IR 3DA-604

IR 3RA-A123

AA A222SS-000-N

AA A222SS-120-A

AA A239SS-120-A

AA A312SD-000-N

AA A312SD-120-A

AA A313SD-120-A

AA A322SD-120-A

AA A412SS-024-D

AA A412SS-120-A

AA A413PD

AA A422SS-120-A

AA ANA4M-ABBAB-180

AA ANA4M-ABBAF-020

AA ANA4P-ABBAB-160

AA ANA4P-ABXAF-360

AA ANAQK-ABBA4-110

AA ANAQK-ABBAB-100

AA ANAQK-ABBAB-150

AA ANAQK-ABBAB-160

AA ANAQK-ABXAF-100

AA ANASK-ABBAB-020

AA ANASK-ABBAB-040

AA ANASK-ABBAB-300

AA ANASK-ABXAU-500

AA ANASK-DBBAD-250

AA ANATK-ABBAB-040

AA ANATK-ABBAB-060

AA ANATK-ABBAD-070

AA ANATK-ABBAD-360

AA ANATK-ABXAP-300

AA ANATK-AVXAD-010

AA ANATK-CBBAB-090

AA ANATK-CBBAB-120

AA ANATM-ABBAB-090

AA ANATM-ABBAB-360

AA ANAWM-ABBAB-020

AA ANAWM-ABBAB-030

AA ANAWM-ABBAB-080

AA ANAWM-BGBAF-054

AA ANBQK-ABXAP-100

AA BQ-1023

AA C38121-600

AA C38121-601

AA C38221-600

AA C38121-820

AA C38221-610

AA C38231-811

AA C38331-800

AA C38341-600

AA C38341-610

AA C38341-801

AA C38351-810

AA C38351-811

AA C38451-810

AA C38461-810

AA CAT08B-000-N

AA CAT33P-000-N

AA CAT33P-012-D