AIM 09B-212-5

Reverse Lever

Call for pricing

AIM 891-300-1

Socket Pin Assambly

Call for pricing

AIM 962-008-0

Spring Washer, 2-5s

Call for pricing

BB 40-143

Respirator - Large

Call for pricing

BB 81-381

8 Oz. Cup Assembly

$141.00

BB PTS-5GAL-K20-600

5 Gal Tk Strainer 600 M

$242.00

CSU 5 1202 1080

Spacer

$32.25

CSU 9 1703 0050

Snap Ring

$1.50

CSU 9 1703 0070

Snap Ring

$1.50

DD QMS-11-1

Fluid Tube, 316 S.S.

$218.00

GG 108118

Element, Filter, 200 Mesh

$211.50

GG 243281

GASKET, RAC 5, 5 PACK

Graco 243281 RAC 5 One Seal, 5 pack

Compatible with most materials. Easy installation withtools. Use only with RAC 5 SwitchTips and Guards.

Model: RAC 5
Series: Gasket

Compatible Tip Type: RAC 5
For Use With: RAC 5 HandTite Tip Guard
Material: Steel, Rubber

$31.00

GG 24A645

KIT, ROD, DISPL, WETCUP, 75CC

Merkur Piston Rod Assembly Kit for LW075A Merkur Displacement Pump Pump Displacement Rod Size: 75cc; Rod Coating: Ultralife

$711.00

GG 261878

Kit, Piston, Cap, 80

$705.00

GG 286817

RAC 5 TIP, SPRAY

RAC 5 SwitchTip, 817 The Reverse-A-Clean (RAC) 817 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)

Used for residential and commercial applications

Includes OneSeal for most common coatings

Large selection of tip sizes available

Easy to identify laser stamped tip size

Solvent seal available when using extremely hot solvents

$62.75

GG 288046

Order GG 26B570

$1,350.00

710 REMOTE, NO NEEDLE, NO SOLENOID

GG A9A01019

710 REMOTE, NO NEEDLE, NO SOLENOID

710 Dispensit Valve

The Model 710 Dispense Valve is an On/Off valve designed for a continuous flow of viscous material through a dispense needle in automatic, semi-automatic or manual applications.

Designed to accurately dispense beads of single-component materials such as silicones and epoxies for sealing, bonding and gasketing applications.

Features and Benefits:

Dispenses a range of material viscosities and flow rates
Offers continuous bead dispensing or rapid on/off cycling without reload time
High-feed pressure-rated needle valve design provides higher flow rates even for narrow bead profiles
Simple on/off control via PLC for integrated solenoid versions or versions for external pneumatic control

$4,120.00

GG B-510-08

WHEEL,RUBBER,LARGE

$7.50

GG LTX625

RAC X LTX TIP, SPRAY, 625

Graco LTX625 RAC X SwitchTip, 625

The Reverse-A-Clean (RAC) 625 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC X HandTite Tip Guard
Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356
Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305
Orifice Diameter (in): 0.025
Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

REVERSE VALVE SPRING

IR 131-664

Reverse Valve Spring Replacement Part for Ingersoll Rand 231 Series Impact Wrench

$15.00

HAMMER MECHANISM KIT

IR 2235-THK1

Hammer Mechanism Kit for Ingersoll Rand 2235 Series Impact Wrench

Includes: Hammer frame, Hammer (2), Hammer pin
Product Application and Uses: Tool Boot for 2235 Series impact wrenches

For Use With

2235QPTIMAX
2235TIMAX-2
2235QTIMAX
2235QTIMAX-G
2235TIMAX-G
2235TIMAX
2235QTIMAX-2
2235TIMAX-R
2235PTIMAX

$117.00

SILENCER

IR 341SR-311

Silencer for Ingersoll Rand 341 Series, 441 Series Air Percussive Tamper

$18.00

REGULATOR ASSEMBLY

IR 4151-A165

Regulator Assembly for Ingersoll Rand 4151 Orbital Sander

$15.00

Digger

IR 95LA1

Digger, 7/8 x 3-1/4" Hex Shank, 1850 BPM, 4" Stroke Length, 1.69" Bore

The 95 Series diggers are meant for heavy duty work, from foundation work, to piping, to break demolition. With a 4 inch piston stroke, and a steel cone, these diggers will not let you down.

Features And Benefits

Weight: With a die cast aluminum handle and housing, the 95 Series is as lightweight (weighing 28 lbs.) as it is powerful, making hard work easy.
Durability: Built with premium materials, the 95 Series can withstand harsh conditions and repeated drops without affecting its performance.
Reliability: The 95 Series is equipped with rubber buffer retainers to absorb shock and prolong the life of your tool.

Product Application and Uses: Foundation work, piping, break demolition
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Consumption @ Load (cfm): 47
Air Consumption @ Load (l/min): 1331
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Blows per Min: 1850
Bore Diameter (in): 1.69
Collar Type: Round
Color: Beige
Configuration/Handle Type: D-Handle
Duty Rating: Industrial Duty
Exhaust Location: Side
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Power Source: Air Powered
Product Length (in): 21.88
Product Weight (lb): 28
Retainer Type: Latch
Shank SIze (in): 7/8 x 3-1/4
Shank Type: Hex
Stroke Length (in): 4
Vibration Level (m/s2): 29.5 / 6.6
Warranty: 1-year

Similar IR

95A1
95LA3
93A1
93A4
93LA1

$2,180.00

HOUSING

IR LG3-40

Housing for Ingersoll Rand HAS75FS10L/VG-1040 Sander

$270.00