DC 14-1890

BLADE 2" SAW, 22T

Used on Cleco Dotco Saws

Used for sawing non-metallic materials

CAUTION: Use only for sawing non-metallic materials

$23.80

DC 14-1891

BLADE 2" SAW, 44T

Used on Cleco Dotco Saws

Used for sawing non-metallic materials

CAUTION: Use only for sawing non-metallic materials

$21.80

DC 14-2082

RING, LOCK

For use with Dotco 12-10, 12-20 and 12-25 series

For use with Dotco 12-10, 12-20 and 12-25 series

$24.10

DC 14-2177

HSG ROUTER NOSE

For use with Dotco 12-10, 12-20 and 12-25 series

For use with Dotco 12-10, 12-20 and 12-25 series

$147.00

DC 14-2187

ATCH #1 ROUTER

For use with Dotco 12-10, 12-20 and 12-25 series

For use with Dotco 12-10, 12-20 and 12-25 series

$237.00

DC 14-2402

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2413

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2426

HSG ROUTER NOSE

For use with Dotco 12-10, 12-20 and 12-25 series

For use with Dotco 12-10, 12-20 and 12-25 series

$128.00

DC 14-2429

ATCH ROUTER

For use with Dotco 12-10, 12-20 and 12-25 series

For use with Dotco 12-10, 12-20 and 12-25 series

$237.00

DC 14-2501

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2502

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2510

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2512

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2539

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to Minimum Order Quantities

$171.00

DC 14-2542

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to Minimum Order Quantities

$179.00

DC 14-2548

Chuck Key

$19.60

DC 14-2600

GUIDE ROUTER

For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.

The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).

Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.

In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.

May be subject to minimum order quantities

$126.00

DC 14-2662

Spring, Torsion Saw

$14.20

DC 14-2700

BLADE CARB TIP 20T

Used on Cleco Dotco Saws

Used for sawing non-metallic materials

CAUTION: These carbide chip and tip and diamond blades are not to be used on metallic materials. Slim blade for easy cutting of fiberglass, with minimum dust -36 grit on periphery and 80 grit on the sides.

$430.00

Saw Blade

DC 14-2710

BLADE CARB TIP 20T

Used on Cleco Dotco Saws

Used for sawing non-metallic materials

CAUTION: These carbide chip and tip and diamond blades are not to be used on metallic materials. Slim blade for easy cutting of fiberglass, with minimum dust -36 grit on periphery and 80 grit on the sides.

$400.00

Saw Blade

DC 14-2711

BLADE CARB TIP 12T

Used on Cleco Dotco Saws

Used for sawing non-metallic materials

CAUTION: These carbide chip and tip and diamond blades are not to be used on metallic materials. Slim blade for easy cutting of fiberglass, with minimum dust -36 grit on periphery and 80 grit on the sides.

$410.00