IR 95477196

LOCKNUT

$15.00

IR 95749537

BOLT 7/8 (MX60)

$15.00

IR 95A1

Digger, 7/8 x 3-1/4" Hex Shank, 1850 BPM, 4" Stroke Length, 1.69" Bore

The 95 Series diggers are meant for heavy duty work, from foundation work, to piping, to break demolition. With a 4 inch piston stroke, and a steel cone, these diggers will not let you down.

Features And Benefits

Weight: With a die cast aluminum handle and housing, the 95 Series is as lightweight as it is powerful, making hard work easy.
Durability: Built with premium materials, the 95 Series can withstand harsh conditions and repeated drops without affecting its performance.
Reliability: The 95 Series is equipped with rubber buffer retainers to absorb shock and prolong the life of your tool.

Product Application and Uses: Foundation work, piping, break demolition
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Consumption @ Load (cfm): 47
Air Consumption @ Load (l/min): 1331
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Blows per Min: 1850
Bore Diameter (in): 1.69
Collar Type: Round
Color: Beige
Configuration/Handle Type: D-Handle
Duty Rating: Industrial Duty
Exhaust Location: Side
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Power Source: Air Powered
Product Length (in): 21.88
Product Weight (lb): 27
Retainer Type: Sleeve
Shank SIze (in): 7/8 x 3-1/4
Shank Type: Hex
Stroke Length (in): 4
Vibration Level (m/s2): 29.5 / 6.6
Warranty: 1-year

Similar IR

95LA1
95LA3
93A1
93A4
93LA1

$1,220.80

3/4" STD HOG RING ANVIL ACCESSORY

IR A61H

DXS2 3/4" Drive Standard Anvil, Friction Ring and Thru Hole Attachment

The DXS® system features torque that works smarter, not harder. Tight-fitting DXS® attachments deliver up to 15% more motor torque to fasteners making the tools more effective – so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS® accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.

Features And Benefits

Compatible with all DXS2 tools.
Versatility meets power in the Ingersoll Rand patented Drive Xchange System™ which lets you switch out anvils without clunky adapters that drain your tool's power.
Maintain the torque power output by replacing your worn anvil in less than a minute.
More impact power transfer compared to common socket adapters.

Includes: (1) DXS2 3/4" Drive Standard Anvil
Product Application and Uses: For use with all Ingersoll Rand DXS2 Drive Impacts.
Anvil Length: Standard
Drive Size (in): 3/4
Drive Type: Square
Product Length (in): 2.2440944881889764
Product Width (in): 0.9940944881889764
Product Height (in): 0.9940944881889764
Product Weight (lb): 0.286601
Retainer Type: Friction Ring and Thru-hole
Warranty: 1-year

For Use With

2236QPTIMAX
2236QTIMAX
2236QTIMAX-2
2236QTIMAX-G
2236QTIMAX-O
2236QTIMAX-R
W7153
W7153-AP
W7153-K22
W7153-K22-CN
W7153-K22-IN
W7153-K22-JP
W7153-K22-KR
W7153-K22-SGHK
W7153-K22B-AN
W7153-K22B-EU
W7253-TL

Similar IR

A31H
A41H
AP41H
EA42H
EA44H
EA46H
EA48H
EA410H
EA66H
AK32H
AK33H
AK42H
AK43H
AK62H
EAK62H

$66.00

3/8" AND 1/2" STD, 2PC SET

IR AK32H

DXS2 3/8” and 1/2” Drive Standard Anvil 2 Piece Set

The DXS® system features torque that works smarter, not harder. Tight-fitting DXS® attachments deliver up to 15% more motor torque to fasteners making the tools more effective – so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS® accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.

Features And Benefits

Compatible with all DXS2 tools.
Versatility meets power in the Ingersoll Rand patented Drive Xchange System™ which lets you switch out anvils without clunky adapters that drain your tool's power.
Maintain the torque power output by replacing your worn anvil in less than a minute.
More impact power transfer compared to common socket adapters.

Includes: 2-Piece DXS2 Set; (1) 3/8” Drive Standard Anvil and (1) 1/2” Drive Standard Anvil
Product Application and Uses: For use with all Ingersoll Rand DXS2 Drive Impacts.
Anvil Length: Standard
Drive Size (in): 3/8
Drive Type: Square
Retainer Type: Friction Ring
Warranty: 1-year

For Use With

2236QPTIMAX
2236QTIMAX
2236QTIMAX-2
2236QTIMAX-G
2236QTIMAX-O
2236QTIMAX-R
W7153
W7153-AP
W7153-K22
W7153-K22-CN
W7153-K22-IN
W7153-K22-JP
W7153-K22-KR
W7153-K22-SGHK
W7153-K22B-AN
W7153-K22B-EU
W7253-TL

Similar IR

A31H
A41H
A61H
AP41H
EA42H
EA44H
EA46H
EA48H
EA410H
EA66H
AK33H
AK42H
AK43H
AK62H
EAK62H

$84.00

1/2" X 2" , 3/4" STD, 2PC SET

IR AK42H

DXS2 1/2" Drive 2" Extended and 3/4” Drive Standard Anvil 2 Piece Set

The DXS® system features torque that works smarter, not harder. Tight-fitting DXS® attachments deliver up to 15% more motor torque to fasteners making the tools more effective – so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS® accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.

Features And Benefits

Compatible with all DXS2 tools.
Versatility meets power in the Ingersoll Rand patented Drive Xchange System™ which lets you switch out anvils without clunky adapters that drain your tool's power.
Maintain the torque power output by replacing your worn anvil in less than a minute.
More impact power transfer compared to common socket adapters.

Includes: 2-Piece DXS2 Set; (1) 1/2" Drive 2" Extended Anvil and (1) 3/4” Drive Standard Anvil
Product Application and Uses: For use with all Ingersoll Rand DXS2 Drive Impacts.
Anvil Length: 2" Extended
Anvil Length: Standard
Drive Size (in): 1/2
Drive Type: Square
Retainer Type: Friction Ring
Retainer Type: Friction Ring and Thru-hole
Warranty: 1-year

For Use With

2236QPTIMAX
2236QTIMAX
2236QTIMAX-2
2236QTIMAX-G
2236QTIMAX-O
2236QTIMAX-R
W7153
W7153-AP
W7153-K22
W7153-K22-CN
W7153-K22-IN
W7153-K22-JP
W7153-K22-KR
W7153-K22-SGHK
W7153-K22B-AN
W7153-K22B-EU
W7253-TL

Similar IR

A31H
A41H
A61H
AP41H
EA42H
EA44H
EA46H
EA48H
EA410H
EA66H
AK32H
AK33H
AK43H
AK62H
EAK62H

$97.00

Anchor

IR BU-206

Anchor

Call for pricing

14 PC SAE IMPERIAL STANDARD DXS2 SOCKET SET

IR DXSK2H14

DXS2 Drive Hex SAE Imperial Impact Socket Set, 14-Piece

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
Up to 20% longer life compared to traditional square driven sockets.
Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
Ball nose retention pin for quick, tool-free installation and removal.
High visibility laser etched markings to easily identify the size you need.
Relieved 6 point Hex corners help reduce faster rounding.
Square retention pin conversion kit available for secure connection.
Complies with ASME B107.110
Backed by a lifetime limited warranty for peace of mind with proven reliability.
For use with all Ingersoll Rand DXS2 drive Impacts.
Includes 14 sockets (7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4") and foam organizer shadowboard tray.

Includes: 14 sockets (7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4") and Foam Organizer Shadowboard Tray
Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 16.38
Product Width (in): 5.44
Product Height (in): 2.5
Product Weight (lb): 4.1
Socket Bit Type: Hex
Socket Depth: Standard
Socket Measurement Type: SAE
Socket Size: 7/16in
Socket Size: 1/2in
Socket Size: 9/16in
Socket Size: 5/8in
Socket Size: 11/16in
Socket Size: 3/4in
Socket Size: 13/16in
Socket Size: 7/8in
Socket Size: 15/16in
Socket Size: 1in
Socket Size: 1-1/16in
Socket Size: 1-1/8in
Socket Size: 1-3/16in
Socket Size: 1-1/4in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited

For Use With

2236QPTIMAX
2236QTIMAX
2236QTIMAX-2
2236QTIMAX-G
2236QTIMAX-O
2236QTIMAX-R
W7153
W7153-AP
W7153-K22
W7153-K22-CN
W7153-K22-IN
W7153-K22-JP
W7153-K22-KR
W7153-K22-SGHK
W7153-K22B-AN
W7153-K22B-EU
W7253-TL

Similar IR

DXSK2H14L
DXSK2M15
DXSK2M15L

$223.00

14 PC SAE IMPERIAL DEEP DXS2 SOCKET SET

IR DXSK2H14L

DXS2 Drive Hex Deep SAE Imperial Impact Socket Set, 14-Piece

Never lose power from worn sockets and square drive anvils with Drive Xchange System™ Sockets and enjoy easier access into tight spaces with up to ¾” shorter tool length when use with Ingersoll Rand DXS™ impact wrenches. DXS™ direct drive sockets fit tighter and have more load bearing surface compared to traditional square drives to deliver up to 15% better torque transfer and 20% longer wear life.

Features And Benefits

DXS Drive delivers up to 15% better torque efficiency compared to square drive sockets and reduces overall tool length by up to 3/4" compared to square drive sockets.
Up to 20% longer life compared to traditional square driven sockets.
Impact-grade toughness chrome-molybdenum (CR-MO) alloy steel with manganese phosphate finish to resist corrosion.
Ball nose retention pin for quick, tool-free installation and removal.
High visibility laser etched markings to easily identify the size you need.
Relieved 6 point Hex corners help reduce faster rounding.
Square retention pin conversion kit available for secure connection.
Complies with ASME B107.110
Backed by a lifetime limited warranty for peace of mind with proven reliability.
For use with all Ingersoll Rand DXS2 drive Impacts.
Includes 14 deep sockets (7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4") and foam organizer shadowboard tray.

Includes: 14 deep sockets (7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4") and Foam Organzier Shadowboard Tray
Product Application and Uses: Vehichle Repair and General Industry. For use with all Ingersoll Rand DXS2 Drive Impacts.
Drive Size (in): DXS2
Drive Type: DXS
Finish: Chrome-molybdenum steel
Insulated: No
Non Sparking: No
Number of Points: 6
Product Length (in): 16.38
Product Width (in): 9.38
Product Height (in): 2
Product Weight (lb): 8.07
Socket Bit Type: Hex
Socket Depth: Deep
Socket Measurement Type: SAE
Socket Size: 7/16in
Socket Size: 1/2in
Socket Size: 9/16in
Socket Size: 5/8in
Socket Size: 11/16in
Socket Size: 3/4in
Socket Size: 13/16in
Socket Size: 7/8in
Socket Size: 15/16in
Socket Size: 1in
Socket Size: 1-1/16in
Socket Size: 1-1/8in
Socket Size: 1-3/16in
Socket Size: 1-1/4in
Standards/Certifications: ASME B107.110
Warranty: Lifetime Limited

For Use With

2236QPTIMAX
2236QTIMAX
2236QTIMAX-2
2236QTIMAX-G
2236QTIMAX-O
2236QTIMAX-R
W7153
W7153-AP
W7153-K22
W7153-K22-CN
W7153-K22-IN
W7153-K22-JP
W7153-K22-KR
W7153-K22-SGHK
W7153-K22B-AN
W7153-K22B-EU
W7253-TL

Similar IR

DXSK2H14
DXSK2M15
DXSK2M15L

$275.00

NOSE COLLAR

IR EL0410BC-46

NOSE COLLAR

$52.00

PIN FOR THD RET, QTY 1

IR FMD2-667

PIN FOR THD RET, QTY 1

$11.20

NUT (49450-83)

IR LE2-85

Nut for Ingersoll Rand M2 Series Sander

$23.00

5" NEEDLE SET-STAINLESS QTY 1

IR NS11-S22-19

5" Needle Stainless Set for Ingersoll Rand 125, 172, 182, 125-EU Series Scalers

Needle Length: 5"
Needle Qty: 19
Product Width (in): 0.13

$49.00

PULLER (P6H)

IR P15H

Ratchet Puller, .5 Ton Capacity, 15ft Lift

Extremely strong and well made, the Ingersoll Rand P-Series pullers are high quality, dependable wire rope pullers for low- and medium-duty pulling and lifting jobs.

Product Application/Uses:

Low and medium-duty pulling and lifting jobs.

Features and Benefits:

4:1 design factor. Meets Specifications
Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. All steel parts are plated for years of useful life
Exclusive long-life 'buttress tooth' cast gear design has no laminated plates to separate or wear and provides maximum strength
Sturdy steel drive and holding pawls have long life and stainless steel springs. All pivot points are hardened steel
Safety latch hooks are drop-forged steel, heat treated and plated for corrosion resistance. Top hook rotates 360° for easy operation
Galvanized aircraft quality wire rope is pre-formed to prevent kinks
One year warranty

$190.40

RECIP SAW BLADE PACKAGE COARSE

IR P4CS-20

4" Saw Blades, Coarse Standard Pitch, 24 TPI, 20-Pack for Ingersoll Rand Reciprocating Air Saw

Ingersoll Rand Air Reciprocating Saw Blades feature Bi-Metal technology, a solid-state diffusion prcess that applies high-speed steel to both edges of the backing material, increasing the contact area by 170%. This technology, coupled with a new saw tooth profile, reduces the frictional heat generated during the cutting process resulting in enhanced overall cutting performance. Pair with your Ingersoll Rand Edge Series 429G Air Saw. Set includes 20 saw blades.

Features And Benefits

Bi-Metal Technology: Increases contact area by 170%.
New Saw Tooth Profile: Reduces the frictional heat generated during the cutting process resulting in enhanced overall cutting performance.
Includes: (20) 4" coarse saw blades.

Includes: (20) 4" coarse saw blades.
Product Application and Uses: Can be used with all standard 1/2" shank air reciprocating saws. Used to cut all woods, composition material, nail embedded wood, non-ferrous metals, plastic.
Finish: Steel
Product Length (in): 4
Teeth per Inch (TPI): 24

For Use With

429
429G
4429

$79.00

RECIP SAW BLADE PACKAGE COARSE

IR P4CS-6

4" Saw Blades, Coarse Variable Pitch, 4-18 TPI, 6-Pack for Ingersoll Rand Reciprocating Saw

Bi-metal technology high speed steel increases blade control by 170%. New tooth profile generates smaller but more chips and reduces frictional heat.

Includes: 6 saw blades
Product Application and Uses: Can be used with all standard 1/2" shank air reciprocating saws. Used to cut all woods, composition material, nail embedded wood, non-ferrous metals, plastic.
Finish: Steel
Product Length (in): 4
Product Width (in): 3.5
Product Height (in): 21.5

For Use With

429
4429
529

$29.00

THROTTLE VALVE

IR PF2200-49

Throttle Valve Replacement Part for Ingersoll Rand 125, 125CI Scaler

$15.00

SPRING

IR PF2200-51

Spring Replacement Part for Ingersoll Rand 125 Air Percussive Needle Scaler

$15.00

GASKET

IR PF2200-52

Gasket Replacement Part for Ingersoll Rand 125, 125CI Scaler

$15.00

REVERSE VALVE GASKET

IR PF800-282

Reverse Valve Gasket Replacement Part for Ingersoll Rand 259G Impact Wrench

$15.00

Pinion

IR SS815L-13-32

Pinion

$217.00

Tune-Up Kit

IR TK-2236-GTK

Tune-Up Kit for Ingersoll Rand DXS 2236 Series Air Impact Wrench

Includes: Power Regulator O-ring, Trigger O-Ring, Reverse Valve O-Ring (top-black), Reverse Valve O-Ring (bottom-blue), Retaining Ring, Cylinder Ball Bearing, Vane Pack (set of 7), Ball Bearing for End Plate, Hammer Case Gasket, Motor Gasket, Inlets Parts Kit, Grease
Product Application and Uses: For use with the Ingersoll Rand 2236 DXS Air Impact Wrench

For Use With