BB 46-6082.jpg

66Sk Air Nozzle

BB 46-6082

BB 46-6082

66Sk Air Nozzle
$156.00
BB 47-478.jpg

Abss Needle Valve Stem

BB 47-478

BB 47-478

Abss Needle Valve Stem
$60.00
BB 47-56802.jpg

568Vt Needle Valve Pkgd

BB 47-56802

BB 47-56802

568Vt Needle Valve Pkgd
$207.00
BB 57-116.jpg

Trigger (140, 190 Gun), B

BB 57-116

BB 57-116

Trigger (140, 190 Gun), B
$30.95
BB 80-388.jpg

Fluid Tube Seal

BB 80-388

BB 80-388

Fluid Tube Seal
$14.25
BB 81-540.jpg

8 Oz Siphon Cup Asm

BB 81-540

BB 81-540

8 Oz Siphon Cup Asm
$210.00
DY 54340.jpg

6 Inch Vacuum Pad, Hook Face

DY 54340

DY 54340

6in (152 mm) Diameter Vacuum Disc Pad, Multi-Hole, Hook-Face, Short Nap

3/8in (10 mm) Thickness Urethane, Medium Density, 5/16in -24 Male Thread

Hole and channel configuration allow for smaller shroud covers to ensure all Vacuum Random Orbital Sanders are compatible

Hidden 1/8" (3 mm) deep recessed channel under acrylic label draws dust to the center, allowing maximum suction

  • Max. RPM: 12000
$42.78
DY 56318.jpg

Sanding Pad 3-1/4 x 5 Vac Hook (4+4 Holes)

DY 56318

DY 56318

3-1/4in (83 mm) x 5in (127 mm) Vacuum Dynabug II Disc Pad, Hook-Face, Short Nap

3/8in (10 mm) Thickness, Medium Density, For Reattachable Discs

$32.76
EM 510821.jpg

31in Left-Hand Glove

EM 510821

EM 510821

31in Left-Hand Glove
$36.55
EM 752453.jpg

Compression Ring MH-3

EM 752453

EM 752453

Compression Ring MH-3
$12.14
GG 112843.jpg

Packing

GG 112843

GG 112843

Packing
$48.10
GG 163323.jpg

SILVER FLAT TIP, SPRAY TC

GG 163323

GG 163323

SILVER FLAT TIP, SPRAY TC

Silver Flat Tip, 323 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 323 Silver Flat Tip has a 0.023 inch orifice and produces a 6 to 8 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.
$54.25
GG 163517.jpg

SILVER FLAT TIP, SPRAY TC

GG 163517

GG 163517

SILVER FLAT TIP, SPRAY TC

Silver Flat Tip, 517 Silver Flat Tips are precision spray tips that are held at the highest level of cut tolerance for specialty architectural and industrial applications. The 517 Silver Flat Tip has a 0.017 inch orifice and produces a 10 to 12 inch fan. Simply install the flat tip into the backside of the guard and thread onto the gun. Remove guard and flush spray tip to clear any clog.
$54.25
GG 239800.jpg

Filter, Fluid

GG 239800

GG 239800

FILTER, FLUID

Graco 239800 Fluid Outlet Fliter, Stainless Steel Bowl, Polyethylene Support, 1/4 npt, 5000 psi (35 Mpa, 350 bar)

$1,450.00
GG 243104.jpg

FLUID, PUMP ARMOR 1 QT, MAG

GG 243104

GG 243104

FLUID, PUMP ARMOR 1 QT, MAG

Pump Armor 1 qt Protects airless paint sprayers from freezing and corrosion when not in use. For use with all Graco paint sprayers. Protects your pump when not in use. Simply fill your pump and leave it in until you use your sprayer again.
$13.30
GG 25A998.jpg

MODULE, STACK, LG MXR, VLV, CLR

GG 25A998

GG 25A998

MODULE, STACK, LG MXR, VLV, CLR

Straight Thread Single Pass Mixing Stack with A/B Material Valves and Color Injector

Straight Thread Single-Pass Mixing Stack designed for Graco F-5 two-component LSR equipment.

Reduce downtime and increase production with mixing stacks.

Reduce pressure drops

  • High-flow material passages on the regulator are 225% larger which reduces pressure drops through the barrel stack.
Easier to clean + assemble- No tapered national pipe thread (NPT) threads and regulator and mixer enhancements for greater clearance. Reduces cleaning time by 50 percent so you can spend more time producing parts.
$10,040.00
GG 25C904.jpg

EM SERIES EM8 VALVE, FLEX EXT, 1/2" NPT

GG 25C904

GG 25C904

EM SERIES EM8 VALVE, FLEX EXT, 1/2" NPT

Graco 25C904 EM8 Electronic Manual Oil/Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT

EM Series handheld and in-line meters are designed to last – from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco’s EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.

  • Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
  • High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
  • Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
  • Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
  • Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.


  • Model: EM8
  • Series: A
  • Approvals: CE
  • Calibration Type: Factory Calibrated
  • Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze
  • Display Type: Electronic
  • Extension Type: Flexible
  • Fluid Inlet Thread Gender: Female
  • Fluid Outlet Thread Gender: Female
  • Includes: Nozzle, Extension
  • Inlet Size (cm): 1.27
  • Inlet Size (in): 1/2
  • Inlet Size (mm): 12.7
  • Inlet Thread Type: NPT
  • IP Rating: 69K
  • Maximum Flow Rate (cc/min): 30283
  • Maximum Flow Rate (cc/sec): 505
  • Maximum Flow Rate (GPM): 8
  • Maximum Flow Rate (L/min): 30.3
  • Maximum Operating Temperature (°C): 82
  • Maximum Operating Temperature (°F): 180
  • Maximum Recorded Dispense: 19999
  • Maximum Storage Temperature (°C): 85
  • Maximum Storage Temperature (°F): 185
  • Maximum Totalizer: 19999
  • Maximum Working Pressure (bar): 102
  • Maximum Working Pressure (kPa): 10200
  • Maximum Working Pressure (MPa): 10.2
  • Maximum Working Pressure (psi): 1500
  • Meter Accuracy (%): ±0.5
  • Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
  • Meter Pressure Loss (psi): 30 PSI at 6 GPM
  • Meter Technology: Oval Gear
  • Metering Gun Weight (kg): 1.36
  • Metering Gun Weight (lb): 3
  • Minimum Flow Rate (GPM): 0.25
  • Minimum Flow Rate (L/min): 0.95
  • Minimum Operating Temperature (°C): -30
  • Minimum Operating Temperature (°F): -22
  • Nozzle Type: Manual
  • Outlet Size (cm): 1.905
  • Outlet Size (in): 3/4
  • Outlet Size (mm): 19.05
  • Outlet Thread Type: ORB
  • Overall Height (cm): 13.3
  • Overall Height (in): 5.25
  • Overall Height (mm): 133
  • Overall Length (cm): 33
  • Overall Length (in): 13
  • Overall Length (mm): 330
  • Overall Width (cm): 9
  • Overall Width (in): 3.5
$775.00
GG 25M535.jpg

KIT, AIR MOTOR, PISTON, REBUILD

GG 25M535

GG 25M535

KIT, AIR MOTOR, PISTON, REBUILD

Graco 25M535 Radial Piston Air Motor Rebuild Kit

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

Application: For wood (top coat, primer) and general finishing applications
  • Maintain easily – air line lubrication not required.
  • Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA


  • Air Inlet Size (cm): 0.635
  • Air Inlet Size (in): 1/4
  • Air Inlet Size (mm): 6.35
  • Air Inlet Thread Type: NPT
  • Maximum Air Inlet Pressure (bar): 5
  • Maximum Air Inlet Pressure (kPa): 500
  • Maximum Air Inlet Pressure (psi): 70
  • Maximum Speed (RPM): 500
  • Motor Type: Pneumatic - Radial Piston
$722.00
GG 269625.jpg

CONTRACTOR FLAT TIP, SPRAY

GG 269625

GG 269625

CONTRACTOR FLAT TIP, SPRAY

Graco 269625 Contractor Flat Tip, 625

The 625 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.025 inch orifice.


    • Model: Contractor
    • Series: Flat Tip
    • Compatible Material: Architectural Coating
    • For Use With: Silver Plus Airless Spray Gun
    • Maximum Fan Width (cm): 30
    • Maximum Fan Width (in): 12
    • Maximum Fan Width (mm): 356
    • Maximum Flow Rate (GPM): 0.67
    • Maximum Flow Rate (L/min): 2.54
    • Maximum Working Pressure (bar): 345
    • Maximum Working Pressure (kPa): 34500
    • Maximum Working Pressure (psi): 5000
    • Minimum Fan Width (in): 12
    • Minimum Fan Width (mm): 305
    • Orifice Diameter (in): 0.025
    • Pattern Size (in): 12 to 14
    • Pattern Size (mm): 304.8 to 355.6
$11.40
GG 269715.jpg

CONTRACTOR FLAT TIP, SPRAY 715

GG 269715

GG 269715

CONTRACTOR FLAT TIP, SPRAY 715

Graco 269715 Contractor Flat Tip, 715

The 715 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.015 inch orifice.


    • Model: Contractor
    • Series: Flat Tip
    • Compatible Material: Architectural Coating
    • For Use With: Silver Plus Airless Spray Gun
    • Maximum Fan Width (cm): 35
    • Maximum Fan Width (in): 14
    • Maximum Fan Width (mm): 406
    • Maximum Flow Rate (GPM): 0.24
    • Maximum Flow Rate (L/min): 0.91
    • Maximum Working Pressure (bar): 345
    • Maximum Working Pressure (kPa): 34500
    • Maximum Working Pressure (psi): 5000
    • Minimum Fan Width (in): 14
    • Minimum Fan Width (mm): 356
    • Orifice Diameter (in): 0.015
    • Pattern Size (in): 14 to 16
    • Pattern Size (mm): 355.6 to 406.4
$11.40
GG 26A129.jpg

PANEL, FLUID, OIL/LUBRICANT

GG 26A129

GG 26A129

PANEL, FLUID, OIL/LUBRICANT

ProDispense Fluid Panel Kit, Oil Meter, 10 wt oil to #2 grease This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for oil and lubricant applications. For oil and lubricant applicatons Oil meter dispenses 10 wt oil to #2 grease.
$7,010.00
GG 286439.jpg

RAC 5 TIP, SPRAY

GG 286439

GG 286439

RAC 5 TIP, SPRAY

RAC 5 SwitchTip, 439 The Reverse-A-Clean (RAC) 439 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.039 inch orifice. Reverse the SwitchTip to easily clear clogs.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  • Used for residential and commercial applications
  • Includes OneSeal for most common coatings
  • Large selection of tip sizes available
  • Easy to identify laser stamped tip size
  • Solvent seal available when using extremely hot solvents
  • $62.75
    GG 286443.jpg

    RAC 5 TIP, SPRAY

    GG 286443

    GG 286443

    RAC 5 TIP, SPRAY

    Graco 286443 RAC 5 SwitchTip, 443

    The Reverse-A-Clean (RAC) 443 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.043 inch orifice. Reverse the SwitchTip to easily clear clogs.

    • Most Widely Used Reversible Spray Tip on the Market (Black Handle)

      Used for residential and commercial applications

      Includes OneSeal for most common coatings

      Large selection of tip sizes available

      Easy to identify laser stamped tip size

      Solvent seal available when using extremely hot solvents


    • Model: RAC 5
    • Series: SwitchTip
    • Compatible Material: Lacquer to Mastic, Latex Paint
    • For Use With: RAC 5 HandTite Tip Guard
    • Maximum Fan Width (cm): 25.4
    • Maximum Fan Width (in): 8
    • Maximum Fan Width (mm): 254
    • Maximum Flow Rate (GPM): 1.98
    • Maximum Flow Rate (L/min): 7.50
    • Maximum Working Pressure (bar): 280
    • Maximum Working Pressure (kPa): 28000
    • Maximum Working Pressure (psi): 4050
    • Minimum Fan Width (in): 8
    • Minimum Fan Width (mm): 203
    • Orifice Diameter (in): 0.043
    • Pattern Size (in): 8 to 10
    • Pattern Size (mm): 203.2 to 254
    $62.75
    GG 286521.jpg

    RAC 5 TIP, SPRAY

    GG 286521

    GG 286521

    RAC 5 TIP, SPRAY

    Graco 286521 RAC 5 SwitchTip, 521

    The Reverse-A-Clean (RAC) 521 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

    Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.
    • Most Widely Used Reversible Spray Tip on the Market (Black Handle)

      Used for residential and commercial applications

      Includes OneSeal for most common coatings

      Large selection of tip sizes available

      Easy to identify laser stamped tip size

      Solvent seal available when using extremely hot solvents


    • Model: RAC 5
    • Series: SwitchTip
    • Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
    • For Use With: RAC 5 HandTite Tip Guard
    • Maximum Fan Width (cm): 30.5
    • Maximum Fan Width (in): 10
    • Maximum Fan Width (mm): 305
    • Maximum Flow Rate (GPM): 0.47
    • Maximum Flow Rate (L/min): 1.78
    • Maximum Working Pressure (bar): 280
    • Maximum Working Pressure (kPa): 28000
    • Maximum Working Pressure (psi): 4050
    • Minimum Fan Width (in): 10
    • Minimum Fan Width (mm): 254
    • Orifice Diameter (in): 0.021
    $62.75
    GG 287034.jpg

    KIT, FILTER, GUN, 60/100MESH

    GG 287034

    GG 287034

    KIT, FILTER, GUN, 60/100MESH

    Graco 287034 Gun Filters, (1) 60 mesh and (1) 100 mesh

    The Gun Filter helps reduce tip plugging and provides a better quality finish by eliminating unwanted particles from the spray pattern. Use 60 mesh for materials such as primer and latex paint. Use 100 mesh for thinner materials such as stain and lacquer.


      • Model: Graco
      • For Use With: Contractor II Spray Gun, FTx Spray Gun
      • Mesh Size: 60, 100
      • Number of Pieces: 2
    $24.70