CONTRACTOR FLAT TIP, SPRAY 831
GG 269831
CONTRACTOR FLAT TIP, SPRAY 831
Graco 269831 Contractor Flat Tip, 831
The 831 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.031 inch orifice.
- Model: Contractor
- Series: Flat Tip
- Compatible Material: Architectural Coating
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 40
- Maximum Fan Width (in): 16
- Maximum Fan Width (mm): 457
- Maximum Flow Rate (GPM): 1.03
- Maximum Flow Rate (L/min): 3.90
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 16
- Minimum Fan Width (mm): 406
- Orifice Diameter (in): 0.031
- Pattern Size (in): 16 to 18
- Pattern Size (mm): 406.4 to 457.2
RAC 5 TIP, SPRAY
GG 286321
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 321 The Reverse-A-Clean (RAC) 321 RAC 5 SwitchTip is designed for narrow surfaces and thick materials. The 321 SwitchTip has a 0.021 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
RAC 5 TIP, SPRAY
GG 286729
RAC 5 TIP, SPRAY
Graco 286729 RAC 5 SwitchTip, 729
The Reverse-A-Clean (RAC) 729 RAC 5 SwitchTip produces a 14 to 16 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
RAC X LTX TIP, SPRAY, 319
GG LTX319
RAC X LTX TIP, SPRAY, 319
Graco LTX319 RAC X SwitchTip, 319
The Reverse-A-Clean (RAC) 319 RAC X SwitchTip is designed for narrow surfaces and thick materials. The 319 SwitchTip has a 0.019 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
FRONT END PLATE
IR 131-11
Front End Plate Replacement Part for Ingersoll Rand 231 Series Impact Wrench
Product Application and Uses: For use with Ingersoll Rand 231 Series Impact WrenchFor Use With
- 231C
VANE PACK
IR 170-42-4
Vane Pack Set of 4 for Ingersoll Rand 1207MAX, 107 Series Air Ratchet
BUTTON KIT (-75, -76)
IR 2131-K75
Button Kit for Ingersoll Rand 2131 Series Impact Wrench
HAMMER KIT
IR 2135-THK1
Hammer Kit for Ingersoll Rand 2135 Series Impact Wrench
Includes: Hammer Case Gasket, (2) Hammers, (2) Hammer Pins, Anvil Assembly, Grease KitProduct Application and Uses: For use with Ingersoll Rand 2135Timax and 2135QTimax Impact Wrenches.
For Use With
- 2135QXPA
INLET BUSHING ASSEMBLY
IR 285B-A565
Inlet Bushing Assembly for Ingersoll Rand 285B Air Impact Wrench
Product Application and Uses: For use with Ingersoll Rand 285B Series Air Impact Wrench.For Use With
- 285B
- 285B-6
- 285B-6-AP
- 285B-S6
SANDER
IR 311A
Dual Action Angle Air Sander, 6" Adhesive Pad, 12,000 RPM, 0.25 HP, Side Exhaust
This quality air sander features a 6-inch pad that’s great for feather edging, metal preparation, and finish work on body filler. Its dual-action pad motion produces swirl-free finishes.Features And Benefits
- The Dual Action Quiet Air Sander comes with a built-in silencer.
- A built-in, adjustable regulator allows for positive speed control, while its compact size lets you access tight, hard-to-reach spaces.
- Durable ball bearing construction improves balance, reduces vibration, and ensures a longer life.
- Motor delivers 0.25 HP and 12,000 RPM and is great for feather edging, metal preparation, and finish work on body filler. Its dual-action pad motion produces swirl-free finishes.
Includes: Bare Tool
Product Application and Uses: Feather Edging, Metal Preparation, Finish Work On Body Filler
Actuation/Throttle Type/Switch Type: Lever
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Arbor/Collet: 5/16"-24 Thread
Average Air Consumption (cfm): 4
Average Air Consumption (l/min): 113
Color: Black
Configuration/Handle Type: Palm
Dust Collection Port Size: No sleeve
Dust Collection Type: None
Duty Rating: Maintenance Duty
Exhaust Location: Side
Housing Material: Aluminum+Bushing
Max Free Speed (rpm): 12000
Max Pressure (bar): 6.2
Min Hose Size (in): 3/8
Motor: Air Gear Motor
Number of Vacuum Holes: 0
Orbit Diameter (in): 3/16
Pad Diameter or Size (in): 6
Pad Face: Adhesive
Power Source: Air Powered
Product Length (in): 9.76
Product Width (in): 12
Product Height (in): 5
Product Weight (lb): 4.2
Rated Power (hp): 0.25
Shroud Style: No
Sound Pressure/Power Db(A): 84.3 / 95.3
Special Features: Quiet, Low vibration
Speed Setting: Variable Speed
Standards/Certifications: Ce
Vacuum: None
Vibration Level (m/s2): 32.3
Warranty: 1-year
Similar IR
- 4151
- 4152
- 311G
BIT RETAINER BUFFER
IR PF2200-203
Bit Retainer Buffer for Ingersoll Rand 125 Air Percussive Needle Scaler
Latch, Brixon #83P Cast Steel Door (208-037)
JB 1011837
Latch, Brixon #83P Cast Steel Door (208-037)
Series 21 1/8in Brass Quick Coupling, Double Shut-Off, Male, BSPP, NBR Seal
NY 21SBAW10MPN
Plug In Nipple G1/8
TRANSDUCER, 100CT-TT, STT10I-P
STR 10285
Torque Transducers: TT and STT Series
| Model | : | STT 10I | |
| Torque Range (cNm) | : | 11.3 - 113 cNM | |
| Torque Range (in-oz) | : | 16-160 ozf.in | |
| Torque Range (kgf-cm) | : | 1.15-11.5 kg cm | |
| Male Hex | : | 0.25 in |
Product Description
- Traditional SR hex flange style
- Can be mounted to ML 250 and ML 600 Mechanical Loaders
- Can be Mounted to Quad Plate for multiple mounting on ML 250
- Detachable cable (Part No: 10293) is required for all transducers
- TT25IO, TT1000 and TT2000 include detachable cable (Part No: 10293)
- Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket
- Smaller sizes (up to 400 in. oz. capacity) can be mounted to SSMB, STMB, or UMB brackets
Transducer 5-50 in Lbs.
STR 10286
Torque Transducers: TT and STT Series
| Model | : | STT 50I | |
| Torque Range (ft-lb) | : | 0.4-4 lbf-ft | |
| Torque Range (nm) | : | 0.56-5.6 Nm | |
| Torque Range (kgf-cm) | : | 5.6-57 kg cm | |
| Male Hex | : | 0.25 in |
Product Description
- Traditional SR hex flange style
- Can be mounted to ML 250 and ML 600 Mechanical Loaders
- Can be Mounted to Quad Plate for multiple mounting on ML 250
- Detachable cable (Part No: 10293) is required for all transducers
- TT25IO, TT1000 and TT2000 include detachable cable (Part No: 10293)
- Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket
- Smaller sizes (up to 400 in. oz. capacity) can be mounted to SSMB, STMB, or UMB brackets