GG 131836

Clamp, Hose, Worm-Drive, Sae #6

GG 131837

Clamp, Hose, Worm-Drive, Sae #28

GG 131838

Clamp, Hose, Worm-Drive, Sae #40

GG 132518

Harness, Fan, Transformer

GG 132518PKG

Harness, Fan, Transformer

GG 132560PKG

Guard, Finger, 80Mm Fan

GG 132593

Gasket, Pump And Ll

GG 132801

Switch, Rotary Disconnect, 3P, 100A

GG 132802

Switch, Fourth Pole, 100A, Ul98

GG 133080

Clip, Retainer

GG 133096

Spacer

GG 133115

Guard, Impact

GG 133171

Insert, Thread, Cap, Strainer, R3

GG 133191

Strainer, Wire Mesh, 200

GG 133353

Switch, Press, 3500Psi, 1/4Npt, Dt3P

GG 133355

Switch, Press, Adj, 0-5K, 1/4Npt, Dt3

GG 133416

Strainer, Suction, 1/4 Npt

GG 133463

Harness, Pump

GG 134337

SPACER, INJECTOR, .015, BLACK

GCI® Series Black Output Spacer, .015 in3 (.25 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The black GCI Series Output Spacer allows the GCI Injector to dispense approximately .015 in3 (.25 cc) of grease per lube event.

GG 134338

SPACER, INJECTOR, .030, RED

GCI® Series Red Output Spacer, .030 in3 (.49 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The red GCI Series Output Spacer allows the GCI Injector to dispense approximately .030 in3 (.49 cc) of grease per lube event.

GG 134339

SPACER, INJECTOR, .045, SILVER

GCI® Series Silver Output Spacer, .045 in3 (.74 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The silver GCI Series Output Spacer allows the GCI Injector to dispense approximately .045 in3 (.74 cc) of grease per lube event.

GG 134340

SPACER, INJECTOR, .060, GOLD

GCI® Series Gold Output Spacer, .060 in3 (.98 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The gold GCI Series Output Spacer allows the GCI Injector to dispense approximately .060 in3 (.98 cc) of grease per lube event.

GG 134341

SPACER, INJECTOR, .080, GREEN

GCI® Series Green Output Spacer, .080 in3 (1.31 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The green GCI Series Output Spacer allows the GCI Injector to dispense approximately .080 in3 (1.31 cc) of grease per lube event.

GG 134342

SPACER, INJECTOR, .100, GRAY

GCI® Series Gray Output Spacer, .100 in3 (1.64 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The gray GCI Series Output Spacer allows the GCI Injector to dispense approximately .100 in3 (1.64 cc) of grease per lube event.

GG 134343

SPACER, INJECTOR, .125, PURPLE

GCI® Series Purple Output Spacer, .125 in3 (2.05 cc) The guesswork involved with “dialing-in” injectors during initial installs and replacement service has been eliminated – dramatically cutting the service time involved and preventing additional downtime to address over/under greasing. Color-coded output spacers dictate the right grease injector needed to always match the dispense output to the manufacturer's specs while eliminating the potential for inaccurate “adjustments” in the field. Color-coded GCI Output Spacers are installed onto the GCI Manifold to meter the desired grease output. A GCI Injector is then installed into the GCI output spacer. Locked-In Output — Color-coded output spacers dictate the amount of grease dispensed per lubrication cycle, reducing the likelihood of incorrect field adjustments during repair. The purple GCI Series Output Spacer allows the GCI Injector to dispense approximately .125 in3 (2.05 cc) of grease per lube event.