RAC X FFLP TIP, SPRAY, (112)

GG FFLP112

RAC X FFLP TIP, SPRAY, (112)

Graco FFLP112 Fine Finish Low Pressure RAC X FF LP SwitchTip, 112

Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 112 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 2 to 4 inch Fan pattern and has a 0.012 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.

Application: For fine finish applications

Less Prep & Cleanup Time
Less mess with less overspray
Put the paint where you want it
Easiest Pattern Overlap
Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality
Extended Life
Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life
Best Tip on the Market
Works with any airless sprayer
Longest lasting Fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: FF LP SwitchTip

Compatible Material: Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solvent borne Paints
For Use With: RAC X HandTite Tip Guard
Material: Tungsten Carbide
Maximum Fan Width (cm): 5
Maximum Fan Width (in): 2
Maximum Fan Width (mm): 102
Maximum Flow Rate (GPM): 0.15
Maximum Flow Rate (L/min): 0.57
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 2
Minimum Fan Width (mm): 51
Orifice Diameter (in): 0.012
Pattern Size (in): 2 to 4
Pattern Size (mm): 50.8 to 101.6

$82.00

RAC X FFLP TIP, SPRAY, (208)

GG FFLP208

RAC X FFLP TIP, SPRAY, (208)

Fine Finish Low Pressure RAC X FF LP SwitchTip, 208 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 208 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch Fan pattern and has a 0.008 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time

Less mess with less overspray
Put the paint where you want it

Easiest Pattern Overlap

Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality

Extended Life

Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life

SmartTip Technology

Exclusive internal tip geometry
Reduces energy required to atomize paints, stains, and other materials
Delivers a superior finish with less pressure
Works with SmartControl on select Graco sprayers

Best Tip on the Market

Works with any airless sprayer
Longest lasting Fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$82.00

RAC X FFLP TIP, SPRAY, (212)

GG FFLP212

RAC X FFLP TIP, SPRAY, (212)

Graco FFLP212 Fine Finish Low Pressure RAC X FF LP SwitchTip, 212

Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 212 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch Fan pattern and has a 0.012 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs.

Application: For fine finish applications

Less Prep & Cleanup Time
Less mess with less overspray
Put the paint where you want it
Easiest Pattern Overlap
Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality
Extended Life
Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life
Best Tip on the Market
Works with any airless sprayer
Longest lasting Fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: FF LP SwitchTip

Compatible Material: Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solvent borne Paints
For Use With: RAC X HandTite Tip Guard
Material: Tungsten Carbide
Maximum Fan Width (cm): 10
Maximum Fan Width (in): 4
Maximum Fan Width (mm): 152
Maximum Flow Rate (GPM): 0.15
Maximum Flow Rate (L/min): 0.57
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 4
Minimum Fan Width (mm): 102
Orifice Diameter (in): 0.012
Pattern Size (in): 4 to 6
Pattern Size (mm): 101.6 to 152.4

$82.00

RAC X FFLP TIP, SPRAY, (308)

GG FFLP308

RAC X FFLP TIP, SPRAY, (308)

Fine Finish Low Pressure RAC X FF LP SwitchTip, 308 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 308 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 inch Fan pattern and has a 0.008 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time

Less mess with less overspray
Put the paint where you want it

Easiest Pattern Overlap

Softer spray fan pattern
Easy to apply any material to any surfance
Consistent blended finish quality

Extended Life

Spraying at half pressure doubles tip life
Reduced sprayer maintenance – up to 2X life

SmartTip Technology

Exclusive internal tip geometry
Reduces energy required to atomize paints, stains, and other materials
Delivers a superior finish with less pressure
Works with SmartControl on select Graco sprayers

Best Tip on the Market

Works with any airless sprayer
Longest lasting Fan pattern
Highest quality finish with a consistent spray pattern

Easy to Identify Tip Size

Large raised tip size numbers are always legible – even when covered with paint

Superior Tip Design

Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

$82.00

KIT, 1040 FG SS, PT, PO, PT

GG FK1113

KIT, 1040 FG SS, PT, PO, PT

SaniForce 1040 FG Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm, PT Seal

$1,530.00

KIT, 1040 FG SS, CW, PO, PT

GG FK1133

KIT, 1040 FG SS, CW, PO, PT

SaniForce 1040 FG Complete Fluid Repair Kit with SS Seat, CW Ball, PO Diaphragm, PT Seal

$1,965.00

KIT, 2150 FG SS, PT, PO, PT

GG FK3113

KIT, 2150 FG SS, PT, PO, PT

SaniForce 2150 FG Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm, PT Seal

$2,930.00

Fusion Ap Tip, Spray

GG FT0848

Fusion Ap Tip, Spray

$165.50

Kit, Mix Chmbr, Flat, Fusion Fx, 20

GG FX20FL

Kit, Mix Chmbr, Flat, Fusion Fx, 20

$171.50

KIT, G250M, INIFLEX, T&I LINK

GG FX250ST

KIT, G250M, INIFLEX, T&I LINK

IniFlex Meter, 50 ft (15.2 m) meter cable, T-shaped spacer and IniFlex link outlet connection Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

$5,790.00

IniFlex Color Stack, 5 Non-Circulation Valves, IniFlex Plug Outlet Fitting Type

GG FXCC0005C

IniFlex Color Stack, 5 Non-Circulation Valves, IniFlex Plug Outlet Fitting Type

$4,000.00

IniFlex Color Stack, 4 Circulation Valves, 1 Non-Circulation Valve, IniFlex Plug Outlet Fitting Type

GG FXCC0401C

IniFlex Color Stack, 4 Circulation Valves, 1 Non-Circulation Valve, IniFlex Plug Outlet Fitting Type

$4,590.00

FITTING, QS, FEP, INIFLEX

GG FXFF01

FITTING, QS, FEP, INIFLEX

IniFlex Fitting, FEP Tube fitting style, quantity 1 Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

$100.50

FITTING, QS, NPT, INIFLEX

GG FXFP01

FITTING, QS, NPT, INIFLEX

IniFlex Fitting, NPT fitting style, quantity 1 Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

$50.75

FITTING, QS, NPT, INIFLEX 50

GG FXFP50

FITTING, QS, NPT, INIFLEX 50

IniFlex Fitting, NPT fitting style, quantity 50 Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves.

$1,800.00