KIT, BURST DISK 5000 BROWN 25PK
GG 563961
KIT, BURST DISK 5000 BROWN 25PK
Blowout Disc Kit - (25) Brown, 5000 psi, 3/8 in.Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Replacement Rupture Packs of 25 (3/8 inch / 9.5 mm diameter discs)
5,000 psi - brown
Lubriquip part number 560-900-140 Trabon part number MV-617-35 KIT, B/O DISC 1750 RED
GG 563963
KIT, B/O DISC 1750 RED
Graco 563963 Blowout Disc Kit - (6) Red, 1750 psi, 11/16 in.
- Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
- Requires replacement of the rupture disc to restart the lube system.
- Easy information on blocked lines, high system pressure or blocked bearings.
- 1,750 psi - red
- Lubriquip part number 560-900-280
KIT, B/O DISC 2950 BLUE
GG 563966
KIT, B/O DISC 2950 BLUE
Graco 563966 Blowout Disc Kit - (6) Blue, 2950 psi, 11/16 in.
- Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
- Requires replacement of the rupture disc to restart the lube system.
- Easy information on blocked lines, high system pressure or blocked bearings.
- 2,940 psi - blue
- Lubriquip part number 560-900-320
SWIVEL, BEARING, 90DEG, 1/2 NPT
GG 564350
SWIVEL, BEARING, 90DEG, 1/2 NPT
Ball Bearing 90º Angle Swivel - 1/2 inch (12.7 mm)90º Angle Swivel - 1/2 inch (12.7 mm)
Lubriquip part number 503-706-001 FILTER, 138 MIC INLINE 1/4-19 BSPP
GG 564406
FILTER, 138 MIC INLINE 1/4-19 BSPP
General Accessories - In-Line Oil/Grease Filters (High-Pressure) - 149 Micron, 100 Mesh In-Line Block Strainer, BSPP For use with High Pressure In-Line Oil and Grease Filters.149 micron, 100 Mesh In-Line Block Strainer, BSPP (ISO 1179)
Lubriquip part number 527-101-130 MINI METER-FLO PUMP, MOTOR ASSY 5CU/IN
GG 564413
MINI METER-FLO PUMP, MOTOR ASSY 5CU/IN
Graco 564413 Miniature Meter-Flo® Assembly - Pump, Gear motor, Reducer Assembly, 5 cu in/min (82 cc/min)
Designed for use with virtually any type of Series Progressive or Single Line Resistive oil lubrication system. The Miniature Meter-Flo has a rugged steel reservoir and motor assembly withstands the toughest applications.
- Capable of high volumetric output operating continuously at pressures up to 1,000 psi (69 bar)
- Compact with several options to create a complete system using feedback and control
- Nominal displacements of 5 cu. in./min. (82 cc/mm.)
- Pump, Gear motor and Reducer assembly - no reservoir
- Reservoir has a suction line strainer, return line port, visual level gauge, pressure gauge and filler/strainer with spring return cap
- Options include low level switch, high pressure indicator, and lube cycle timer
- Lubriquip part number 540-800-620
KIT, ACC, ADJ PRESSURE RELIEF
GG 571028
KIT, ACC, ADJ PRESSURE RELIEF
Graco 571028 Adjustable Return-to-Reservoir Pressure Relief Kit - 500-3500 psi (35-241 bar) - 1/4” NPT
Application: For use with G-Series Pumps.- Adjustable Return-to-Reservoir Pressure Relief Kit – 500-3500 psi (35-241 bar)
ADAPTER, OUTLET TO HAND PUMP
GG 571167
ADAPTER, OUTLET TO HAND PUMP
Pump Outlet Adapter For use with G-Series Pumps and G3 Grease Gun. XP SYSTEM, 1:1, 145/145, BF, CH
GG 572102
XP SYSTEM, 1:1, 145/145, BF, CH
XP70-hf Cart System, Hazardous Location, 1:1 Bare, 240VTwo-component spraying made easy and affordable. The XP-hf system combines the popular XP70 Sprayers with the powerful XL 10000 air motor. Combining these two technologies, you get more flow - getting jobs done faster and with less wear and tear. Engineered for more flow capacity, the Graco XP70-hf is great for applications where you want to spray with multiple guns or larger tip sizes. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.
High-pressure performance for two-part high-solids coatings. Reduced material waste No more throwing away unused mixed material at the end of the day Save money by using less clean-up solvent Consistent material quality - no more guesswork or human error in measuring materials Easy to operate - minimal training required Reduced maintenance costs Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths 