Picture of Graco E-Flo DC Sealed 4-Ball Electric Circulation Pump, Advanced Controls, 2HP, 480V/3 Ph, 2000cc Lower, 1.5in Tri-Clamp, Stand, and Surge Tank (Color and Solvent)

Graco E-Flo DC Sealed 4-Ball Electric Circulation Pump, Advanced Controls, 2HP, 480V/3 Ph, 2000cc Lower, 1.5in Tri-Clamp, Stand, and Surge Tank (Color and Solvent)

GG EC4D71

Graco E-Flo DC Sealed 4-Ball Electric Circulation Pump, Advanced Controls, 2HP, 480V/3 Ph, 2000cc Lower, 1.5in Tri-Clamp, Stand, and Surge Tank (Color and Solvent)

$39,560.00

E-FLO DC 4-BALL ELEC. CIRCULATION PUMP, 300CC, 2X2 HP, 480V, ADVANCED, ATEX/FM/IECEX, SEALED LOWER, ULTALIFE ROD/CYLINDER, TRI-CLAMP STAND

GG EC5J41

E-FLO PUMP, DC, X2, 3000CC, SEALED

E-Flo DC 4-Ball Electric Circulation Pump, 3000cc, 2 x 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, StandE-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.Advanced model lets you easily connect and manage multiple pumps with a single control module.Integrated runaway protection prevents pump from premature wear and costly material loss.Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime.Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second.Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne.Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.

$48,480.00

E-FLO DC 4-BALL ELEC. CIRCULATION PUMP, 500CC, 2X2 HP, 480V, ADVANCED, ATEX/FM/IECEX, SEALED LOWER, ULTALIFE ROD/CYLINDER, TRI-CLAMP STAND

GG EC8J41

E-FLO DC 4-BALL ELEC. CIRCULATION PUMP, 500CC, 2X2 HP, 480V, ADVANCED, ATEX/FM/IECEX, SEALED LOWER, ULTALIFE ROD/CYLINDER, TRI-CLAMP STAND

$55,880.00

Hose, Coupled, 5600 psi

GG H55003

Hose, Coupled, 5600 psi

$160.00

Hose, Assy, Heated, Fittings, 3/8 x 180, SS

GG LC0886

Hose, Assy, Heated, Fittings, 3/8 x 180, SS

$6,400.00

Coupling, Q.D., Male

GG M70399

Coupling, Q.D., Male

$16.30

Fitting, Elbow, 1/4Nptm X 1/4Nptm Zp

GG RM-856-04

Fitting, Elbow, 1/4Nptm X 1/4Nptm Zp

$250.00

Pail Clamp

GG SA907

Pail Clamp

$1,715.00

Iq Ball Seat Valve, 25, Npt/B, 000, Adj/Sol, Amb

GG V25AB000BA

IQ BALL SEAT VALVE, 25, NPT/B, 000, ADJ/SOL, AMB

Graco V25AB000BA iQ Dispense Valve, Ball/Seat, Ambient, NPT Tip, 0in (000mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

Maximize dispense time while minimizing maintenance costs and effort
Delivers precise, consistent dispensing with clean starts and stops
Ideal for low to high viscosity materials
Easy repeatable mounting for robotic and automated applications.
200mm nozzle is compatible with 200mm focal length vision systems

Air Inlet Size (in): 5/16
Air Inlet Thread Type: Push-to-Connect

Ambient/Warm Melt/Hot Melt: Ambient
Applicator Type: Ball/Seat

Component Type: Single Component

Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

Gun Activation: Automatic

Maximum Air Pressure (bar): 8.3

Maximum Air Pressure (MPa): 0.83
Maximum Air Pressure (psi): 120

Maximum Fluid Pressure (bar): 276
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000

Mount Location: Direct Mount Solenoid
Nozzle Size (in): N/A
Nozzle Size (mm): N/A

Outlet Block Length (in): NA
Outlet Block Length (mm): NA

$0.00

IQ Ball Seat Valve, 25, Npt/B, 000, Adj/Rm, Amb

GG V25AB000DA

IQ BALL SEAT VALVE, 25, NPT/B, 000, ADJ/RM, AMB

Graco V25AB000DA iQ Dispense Valve, Ball/Seat, Ambient, NPT Tip, 0in (000mm) Nozzle, Remote Mount Solenoid

The iQ Ball and Seat Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

Maximize dispense time while minimizing maintenance costs and effort
Perfect for standard on/off applications
Ideal for low to high viscosity materials
Easy repeatable mounting for robotic and automated applications.

Air Inlet Size (in): 1/8
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Ambient/Warm Melt/Hot Melt: Ambient
Applicator Type: Ball/Seat

Component Type: Single Component

Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

Gun Activation: Automatic

Maximum Air Pressure (bar): 8.3

Maximum Air Pressure (MPa): 0.83
Maximum Air Pressure (psi): 120

Maximum Fluid Pressure (bar): 276
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000

Mount Location: Remote Mount Solenoid
Nozzle Size (in): N/A
Nozzle Size (mm): N/A

Outlet Block Length (in): NA
Outlet Block Length (mm): NA

$0.00

Iq Tip Seal Valve, 25, 1.0/T, 000, Adj/Rm, Amb

GG V25DT000DA

Iq Tip Seal Valve, 25, 1.0/T, 000, Adj/Rm, Amb

$0.00

IQ Tip Seal Valve, 25, 1.0/T, 060, Adj/Sol, Amb

GG V25DT060BA

IQ TIP SEAL VALVE, 25, 1.0/T, 060, ADJ/SOL, AMB

Graco V25DT060BA iQ Dispense Valve, Tip-Seal, Ambient, 0.039in (1.0mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

Maximize dispense time while minimizing maintenance costs and effort
Delivers precise, consistent dispensing with clean starts and stops
Ideal for low to high viscosity materials
Easy repeatable mounting for robotic and automated applications.
60mm nozzle is compatible with 60mm focal length vision systems

Air Inlet Size (in): 5/16
Air Inlet Thread Type: Push-to-Connect

Ambient/Warm Melt/Hot Melt: Ambient
Applicator Type: Tip-Seal

Component Type: Single Component

Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Gun Activation: Automatic

Maximum Air Pressure (bar): 8.3

Maximum Air Pressure (MPa): 0.83
Maximum Air Pressure (psi): 120

Maximum Fluid Pressure (bar): 276
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000

Mount Location: Direct Mount Solenoid
Nozzle Size (in): 0.039
Nozzle Size (mm): 1.0

Outlet Block Length (in): 2.4
Outlet Block Length (mm): 60

$0.00

IQ Dispense Valve, Tip-Seal, Ambient, 0.039In(1.0 mm )Tip, 7.87In(200 mm )Nozzle, Direct Mount Solenoid

GG V25DT200BA

IQ TIP SEAL VALVE, 25, 1.0/T, 200, ADJ/SOL, AMB

Graco V25DT200BA iQ Dispense Valve, Tip-Seal, Ambient, 0.039in (1.0mm) Tip, 7.87in (200mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

Maximize dispense time while minimizing maintenance costs and effort
Delivers precise, consistent dispensing with clean starts and stops
Ideal for low to high viscosity materials
Easy repeatable mounting for robotic and automated applications.
200mm nozzle is compatible with 200mm focal length vision systems

Air Inlet Size (in): 5/16
Air Inlet Thread Type: Push-to-Connect

Ambient/Warm Melt/Hot Melt: Ambient
Applicator Type: Tip-Seal

Component Type: Single Component

Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Gun Activation: Automatic

Maximum Air Pressure (bar): 8.3

Maximum Air Pressure (MPa): 0.83
Maximum Air Pressure (psi): 120

Maximum Fluid Pressure (bar): 276
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000

Mount Location: Direct Mount Solenoid
Nozzle Size (in): 0.039
Nozzle Size (mm): 1.0

Outlet Block Length (in): 7.9
Outlet Block Length (mm): 200

$0.00

IQ Dispense Valve, Tip-Seal, Ambient, 0.067In (1.7 mm ) Tip, 2.36In (60 mm )Nozzle, Remote Mount Solenoid

GG V25GT060DA

IQ TIP SEAL VALVE, 25, 1.7/T, 060, ADJ/RM, AMB

Graco V25GT060DA iQ Dispense Valve, Tip-Seal, Ambient, 0.067in (1.7mm) Tip, 2.36in (60mm) Nozzle, Remote Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

Maximize dispense time while minimizing maintenance costs and effort
Delivers precise, consistent dispensing with clean starts and stops
Ideal for low to high viscosity materials
Easy repeatable mounting for robotic and automated applications.
60mm nozzle is compatible with 60mm focal length vision systems

Air Inlet Size (in): 1/8
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Ambient/Warm Melt/Hot Melt: Ambient
Applicator Type: Tip-Seal

Component Type: Single Component

Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Gun Activation: Automatic

Maximum Air Pressure (bar): 8.3

Maximum Air Pressure (MPa): 0.83
Maximum Air Pressure (psi): 120

Maximum Fluid Pressure (bar): 276
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000

Mount Location: Remote Mount Solenoid
Nozzle Size (in): 0.067
Nozzle Size (mm): 1.7

Outlet Block Length (in): 2.4
Outlet Block Length (mm): 60

$0.00

IQ Dispense Valve, Tip-Seal, Ambient, 0.067In (1.7 mm ) Tip, 7.87In(200 mm )Nozzle, Remote Mount Solenoid

GG V25GT200DA

IQ TIP SEAL VALVE, 25, 1.7/T, 200, ADJ/RM, AMB

Graco V25GT200DA iQ Dispense Valve, Tip-Seal, Ambient, 0.067in (1.7mm) Tip, 7.87in (200mm) Nozzle, Remote Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

Maximize dispense time while minimizing maintenance costs and effort
Delivers precise, consistent dispensing with clean starts and stops
Ideal for low to high viscosity materials
Easy repeatable mounting for robotic and automated applications.
200mm nozzle is compatible with 200mm focal length vision systems

Air Inlet Size (in): 1/8
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Ambient/Warm Melt/Hot Melt: Ambient
Applicator Type: Tip-Seal

Component Type: Single Component

Fluid Inlet Size (in): 1/4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Gun Activation: Automatic

Maximum Air Pressure (bar): 8.3

Maximum Air Pressure (MPa): 0.83
Maximum Air Pressure (psi): 120

Maximum Fluid Pressure (bar): 276
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000

Mount Location: Remote Mount Solenoid
Nozzle Size (in): 0.067
Nozzle Size (mm): 1.7

Outlet Block Length (in): 7.9
Outlet Block Length (mm): 200

$0.00

E-FLO DCI 4-BALL ELEC. PUMP, 2500CC, 5 HP, 380-480V, 3PH, SST ULTRALIFE LOWER, TRI-CLAMP STAND

GG YB2841

E-FLO DCI PUMP, 3HP1-48B0-2500USS-S-0

E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall MountDual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lowerâ€™s 2500 cc configuration powers maximum continuous flow rate.Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors.Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).DCi Linkâ„¢ connects via ethernet to your factoryâ€™s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required.Floor/Wall stand has compact footprint with a space-saving vertical design.Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.Stainless steel (SST) lower is coated with Ultralife for extensive durability.

$36,780.00

E-FLO DCI 4-BALL ELEC. PUMP, 4000CC, 5 HP, 380-480V 3PH, ST ULTRALIFE LOWER, TRI-CLAMP STAND

GG YB3341

E-FLO DCI PUMP, 5HP1-48B0-4000USS-S-0

E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall MountDual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lowerâ€™s 4000 cc configuration powers maximum continuous flow rate.Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.An annual oil change is all thatâ€™s needed to keep the 5 horse power (HP) motor running efficiently.Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).DCi Linkâ„¢ connects via ethernet to your factoryâ€™s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required.Floor/Wall stand has compact footprint with a space-saving vertical design.Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.Stainless steel (SST) lower is coated with Ultralife for extensive durability.

$39,860.00

E-FLO DCI 4-BALL ELEC. PUMP, 3000CC, 5 HP, 380-480V, 3PH, SST ULTRALIFE LOWER, TRI-CLAMP STAND

GG YB4441

E-FLO DCI PUMP, 5HP1-48B0-3000USS-S-0

E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall MountDual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lowerâ€™s 3000 cc configuration powers maximum continuous flow rate.Electric piston pump circulates paints and coatings for automotive manufacturing, as well as architecture, agriculture, transportation and other industries.An annual oil change is all thatâ€™s needed to keep the 5 horse power (HP) motor running efficiently.Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).DCi Linkâ„¢ connects via ethernet to your factoryâ€™s PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.Basic controls integrate easily with factory programmable logic controller (PLC); no variable frequency drive (VFD) is required.Floor/Wall stand has compact footprint with a space-saving vertical design.Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.Stainless steel (SST) lower is coated with Ultralife for extensive durability.

$39,770.00